• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.161-167
• /
• 2011

Purpose: The purpose of this study was to evaluate the influence of porcelain re-firing on the formation of surface bubble and on the change in shade of metal-ceramic crown exposed to artificial saliva. Materials and methods: Thirty disk-shaped specimens were made in 10 mm diameter with 0.5 mm metal core thickness and 1 mm ceramic thickness. A spectroradiometer was used to determine the CIE Lab coordinates. The number and size of surface bubble were observed with a stereomicroscope. After the exposure to artificial saliva for 7 days, re-firing was performed at glazing temperature. After re-firing, the CIE Lab were calculated, and the number and size of surface bubble were observed again. The change in shade was expressed with ${\Delta}E$. Statistical analysis was done with paired t-test for the change in the number of surface bubble and student t-test for the change in the size of surface bubble (${\alpha$}=0.05). Results: Shade difference was calculated 2.14 ${\Delta}E$ units. The mean number of surface bubble was $1.33{\pm}1.49$ before re-firing, $3.27{\pm}2.90$ after re-firing. After re-firing, the number of surface bubble was significantly increased (P<.05). The mean size of surface bubble was $81.97{\pm}32.03\;{\mu}m$ before re-firing, $142.94{\pm}47.40\;{\mu}m$ after re-firing. After re-firing, the size of surface bubble was significantly increased (P<.05). Conclusion: Shade change after re-firing was perceptible (${\Delta}E$ < 2.0) and clinically acceptable (${\Delta}E$ < 3.7). The number and size of surface bubble was significantly increased after re-firing. Further investigation to decrease the surface bubble on the extra oral repair of metal-ceramic crown, will be needed in future study.

• 농업기술회보
• /
• v.42 no.5 s.499
• /
• pp.46-51
• /
• 2005

본 협회,농진관 재소송 결과 지방법원(1심) 승소/도시민웰빙농사 교육 6월11일 성료/제주도연합회 총회 개최/백영철 회우,산악승마장 개장식/진창근 이사 장남 결혼/중국 산동성, 과수·채소·식품박람회 및 연태농업시찰단 참가안내/남북농민 교류 및 금강산 여행단 참가안내/40년 역사의 자랑스런 농업기술회보!회원여러 분의 정성과 참여를...

• Journal of the Korean Data Analysis Society
• /
• v.20 no.6
• /
• pp.3069-3085
• /
• 2018

In this study, we examined the effect of non-cognitive factors on job tenure and tenure using KLIPS. We examine the internal consistency of the big5 personality trait and of the locus of control, and use the parameterized proportional hazards model. As a result, we confirmed that non-cognitive skill such as personality traits and locus of control affect individual labor market performance. Conscientiousness has shown that the job seeking period of adult job seekers is lengthened, thereby lowering the unemployment rate. It can be understood that high attentiveness under uncertainty can misinterpret information, and that lack of decision restricts escape from unemployment. In the tenure analysis, people with internal locus of control tendency were less likely to leave the job due to longer tenure. Those who have internal control can not only be preferred by the organization but also the internal control tendency seems to be the factor that maintains the long-term job because of the motivation and self-control of their actions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.656-673
• /
• 2003

Statement of problem : Long-term exposure of dental porcelain to saliva during temporary cementation of a porcelain-fused to metal (PFM) restoration could affect mechanical strength of dental porcelain if the restoration is refired. Purpose : This work was performed to verify the effect of water on the mechanical strength in aged dental porcelain. Material and method : 63 specimens(Vintage Metalbond opaque and opal powder) were distributed to three experimental groups ; non-water immersed control, immersed and pedried, and immersed and non-predired groups. The changes in flexural strength and fracture toughness after specimen refiring related to Fourier Transform Infrared (FT-IR) spectroscopy. Results : 1. The FT-IR reflectances assigned to molecular bonds of $H_2O$ were noted as significantly different between the first-fired group and three refired groups and between two water-immersed groups and control group after refiring(p<0.05). They were also significantly different between predried group and non-predried group after refiring(p<0.05) 2. For opal specimens, FT-IR absorbances for hydrogen bond of $H_2O$ and silanols were significantly higher in non-predried group than in predreid group(p<0.05). 3 Predried opal group showed the highest mean flexural strength(p<0.05). Non-predried group indicated higher mean flexural strength than control group(p<0.05). 4. The mean fracture toughness for predired group was higher than non-predried group(p<0.05). 5. The difference of leucite crystal size is noted between control group and water-immersed, predried group in scanning electron microscopic study(${\times}10000$).

• Resources Recycling
• /
• v.29 no.6
• /
• pp.73-78
• /
• 2020

To use a tailing obtained from coal beneficiation as a raw material for glass material, the behaviors of phase transformation of the tailing was investigated according to sintered temperature with the addition of Na2CO3. As a result of the experiment, mullite was formed at 700~1,100 ℃, and the mullite and the cristobalite just only existed at 1,450 ℃. The glassification ratio of the coal tailing was to be 97.9 wt.% at 1,450 ℃ with the addition of Na2CO3 to tailing weight ratios of 10 wt.%. However, in the case of sample of coal tailing with 20 wt.% Na2CO3 added, nepheline(Na2O·Al2O3·2SiO2) was produced during the re-sintering(2nd sintering) at 1,100 ℃. From the results, the suitable addition amount of Na2CO3 for glassification of coal tailing was found around 10 wt.%.

• Journal of Sericultural and Entomological Science
• /
• v.5
• /
• pp.47-51
• /
• 1965

This report was prepared to find the relationship between silk finishing method and winding test result and the obtained results were as followings. 1. The breaks of a lot double skein was larger than that of single skein during winding test. 2. The rear side of test skein showed about double breaks of surface side of it. 3. The skein on silk book corner showed worst breaks, but the inner skeins showed least breaks. 4. The silk breaks per every ten minutes winding period decreased by and by. 5. The danger of silk breaks during winding test showed more in double skein than single skein in case of inperfect silk finishing. 6. The proper moisture content of raw silk after finishing is 10∼11％.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.671-687
• /
• 2021

This study investigated the firing temperature and thermal deformation process of roof tiles excavated from the connected stone-mound tomb in Seokchon-dong, Seoul, based on mineralogical and physical properties. A large number of roof tiles were excavated from the tomb site and some roof tiles were deformed by heat and were fired in uneven conditions. The colors of original roof tiles and their cores are mostly yellowish-brown, with high water absorption over 12%, containing fine-grained textures and some minerals such as quartz, feldspars, amphibole, and mica. It is estimated that the original roof tiles were fired below 900℃ in oxidation condition, showing loose matrices and mica layers by scanning electron microscopy. However, deformed roof tiles have the uneven surface color of reddish-brown and bluish-gray, and those cross-sections have sandwich structures in which dense reddish-brown surface and porous grey core coexist. They contained mullite and hercynite, so it was estimated to have been fired over 1,000℃, with 0.81~11% water absorption. In some samples, bloating pores by overfiring were observed, which means that they were fired at more than 1,200℃. In addition, the refirng experiments that the original roof tile was fired between 800℃ and 1,200℃ were carried out to investigate the physical and mineralogical properties of roof tiles compared to deformed ones. As a result, the water absorption decreased rapidly and the mineral phase started to change over 1,000℃. As the temperature gradually rises, the matrices are partially melted and recrystallized, resulting in similar thermal characteristics of deformed roof tiles. Therefore, the roof tiles from ancient tombs in Seokchon-dong seem to experience the secondary high temperature of 1,000 to 1,200℃ under uneven firing conditions, resulting in deformation characteristics such as shape transformation and mineral phase transition. It is considered to have been related to cremation rituals at the tombs of Seockchon-dong during the Baekje period.

• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.87-97
• /
• 1980

To compare the castability of various alloys popularly used in Korea for porcelain-fused-to-metal restorations, author selected Degudent G as precious alloy, J.P. 92 as semiprecious alloy and Vera Bond, Rexillium III, Unit Bond, Fine Bond as non precious alloys. With nylon lines and gauge waxes, author made the wax patterns for the castability comparison test. In the same conditions, wax patterns were invested, burned out and cast. Author obtained the following results from this study. 1. The castability of Degudent G as precious alloy for porcelain-fused-to-metal crown and bridge was the best of all. 2. The castability of nonprecious alloys was less than Degudent G as precious alloy, but their differences were not large. 3. The castability of Rexillium III is the best of all nonprecious alloys and that of Vera Bond, Unit Bond had nearly the same results. 4. Semiprecious alloy (J.P. 92) was less castable than nonprecious alloys.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.1
• /
• pp.4-14
• /
• 2016

Although CAD/CAM technology has been used in dentistry for more than decades, the present CAD/CAM dentistry is still quite inefficient or unesthetic. Zirconia restoration has faced with two contradictory words, 'Efficiency' and 'Esthetics'. One can consider monolithic zirconia restoration to be efficient with CAD/CAM. The monolithic zirconia restoration, however, is rarely esthetic due to the current limitations with zirconia. On the contrary, porcelain build-up is almost indispensible in fabricating esthetic restoration, especially in anterior region. In this article, the current status of monolithic zirconia restoration and clinical cases will be presented.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.735-738
• /
• 2009

촉매 생산에서 마지막으로 중요한 단계는 촉매성형이다. 여기서 압출성형은 촉매 성형방법 중 저렴하고 비교적 간단한 방법 중 하나이다. 여기서 중요한 것은 바인더의 선택과 입자 사이즈가 가장 중요한 요인이 된다. 촉매 압출성형에서 많이 쓰이는 바인더로 PVA(Polyvinyl Alcohol)와 MC(Methyl Cellulose), CMC(Carboxymethyl Cellulose)가 있다. CMC 바인더의 경우, 촉매의 접착력이 현저히 떨어져 촉매의 바인더로 사용하기 어려웠다. PVA, MC 바인더의 경우, 촉매의 접착력이 우수하고 압출성형이 잘 되었다. 그러나 PVA 바인더의 경우, 열중량 분석을 통해 재 소성과정에서 바인더가 완전히 제거되지 않아서 촉매의 물성 변화 및 활성에 좋지 않은 영향을 주었다. 그러나 MC의 경우에는 재소성과정에서 바인더가 완전히 제거되어 촉매의 물성변화에 영향을 주지 않았으며, 촉매의 활성 변화에도 영향을 주지 않았다. 그래서 메탄 수증기 개질 촉매의 압출 성형에 적합한 바인더로 MC가 적합하다고 판단된다. 그리고 압출용 반죽 제조를 위한 미분쇄된 촉매 입자의 사이즈에서 너무 작은 입자를 사용하게 되면 반죽은 잘 되나 촉매의 물성변화로 인해 촉매 활성이 저하되는 것을 알 수 있었다. 그래서 볼밀로 정밀하게 입자 사이즈를 $10{\mu}m$ 이하로 조절하면 촉매 활성에 영향이 거의 없는 압출성형 촉매를 제조할 수 있다.