• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1590-1596
• /
• 1995

The energy release rates for a dynamically growing crack in orthotropic materials are expressed explicitly in terms of dynamic stress intensity factors. The stress functions suitable for the problem are found and the evaluation of the J-integral for the theoretical singular crack tip fields yields energy release rates. The present results are simpler than the existing ones and can be reduced to the well known solutions in special cases. Examples of extracting stress intensity factors from the finite element solution using the present results are given for the dynamically growing crack problem of orthotropic materials.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.5
• /
• pp.204-210
• /
• 2004

Though the recycling rate of coal fly ash generated from domestic thermoelectric power plants is gradually increased, at present, the most amount of coal bottom ash is disposed by a landfill instead of recycling. Therefore, to reuse a coal bottom ash as high-value materials the synthesis of zeolite made from a coal bottom ash was investigated in this study. NaPl, hydroxy-sodalite and tobermorite were produced through the alkaline hydrothermal reaction of pulvelized bottom ash at various temperatures; 80, 120, $150^{\circ}C$, and the concentration of NaOH at the range from 1 to 5 M. Especially, NaPl with excellent cation exchange capability had a high crystallinity at ${\leq}2$ M NaOH and ${\leq}120^{\circ}C$.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.477-486
• /
• 2016

We investigated the growth pattern of Red-tongued viper snakes (Gloydius ussuriensis), which were captured from the islet of the Jeju Island, Gapado between April, 2006 and November, 2009. The results indicated that there were some snakes that grew relatively fast, but most snakes either almost did not grow or grew around 10mm in snout-vent length during one year period. High growth rates was April and June. Since the growth rate of snakes is highly correlated with their foods, these results implied that the feeding activity of Red-tongued viper snakes is high during this period compared to other months. In female, difference in body condition between good-conditioned and bad-conditioned snakes became large as time elapsed from April to June. The body condition of the male Red-tongued viper snakes improved with the progression of time from April till June. Many of the Red-tongued viper snakes were captured between April and June, while they were rarely captured between July and September. Some of the Red-tongued viper snakes were captured during the autumn season. This tendency was because snakes were rarely active during hibernation and peak summer seasons. Thus, Red-tongued viper snakes are active between April and June and between September and November. They then go into hibernation as the temperature dropped in November. Furthermore, the limitation of the movement period of the Red-tongued viper snakes restricted their feeding activities while foods became scarce, which ultimately restricted their overall growth rate. The growth rate of the snakes decreased with age. The snout-vent length of the Red-tongued viper snakes and growth rate showed a negative correlation (r = -0.591), however, it was not statistically significant due to small sample size. The findings from this study could provide meaningful information in the further study of the life cycle of Red-tongued viper snakes.

• Journal of Aquaculture
• /
• v.22 no.1
• /
• pp.16-22
• /
• 2009

Life history of Korean crayfishes Cambaroides similis (Koelbel) was studied 8 month from March to October, 2006 from the Gwanak mountain, Seoul, South Korea. By capture and recapture method, 551 crayfishes were collected analyzed during the experimental period. Based on the distribution pattern of body lengths, the local population putatively divided into four age groups. The sex ratio of male and female was almost equal. However, their growth rates varied by water temperature. Early juveniles seen during June became adult during August. The study findings suggest that late autumn is mating season.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.6
• /
• pp.264-270
• /
• 2008

Ecological lightweight aggregates were made by using the wastes come from various industrial fields. Wastes were crushed and pulverized by mills and a certain portions of wastes were mixed and formed by pelletizer like small beads. The formed lightweight aggregates were finally sintered with $1125^{\circ}C$/15 min conditions by using rotary kiln. Lightweight concrete sound absorbers were made of ecological lightweight aggregates K73 (Coal bottom ash 70 wt%: Dredged soil 30 wt%) and K631 (Clay 60 wt%: Stone sludge 30 wt%: Spent bleaching clay 10 wt%). For the reference, lightweight concrete sound absorbers made of DL (German made 'L' company LWA) were also made under the same conditions. Sound absorption characteristics were observed and measured according to the kinds of aggregates, water/cement ratio (W/C=20, 25, and 30%), and designed pore rates (V=20, 25, and 30%). The pore rates of the lightweight concrete sound absorber were turned out to be 5 to 10% higher than designed ones. Absorption coefficient of the lightweight concrete sound absorber by using K631 aggregates with W/C=20% and V=25% conditions was 0.88 at 1000 and 3150 Hz from the measurement by the impedance tube.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.290-294
• /
• 2009

Larval development of Nannopaya pygmaea Rambur (Libellulidae), an endangered dragonfly in Korea, was studied using an introduced lariat population in an artificial wetland habitat. Artificial habitat was created in a green house which imitated a small wetland in Boryeong-si, Chungcheongnam-do, Korea, where N. pygmaea inhabited. A total of 300 N. pygmaea larvae were introduced to the artificial habitat in June 2007. Larvae were recaptured five times between June 2007 and November 2008 for measurement of body length. As a result, the initial and recaptured populations (Recaptured I, II, III, IV, and V populations, respectively) contained two body size groups [initial 6.20$\pm$0.34 mm and 7.94$\pm$0.46 mm (mean$\pm$SD); Recaptured I 2.84$\pm$0.43 mm and 5.16$\pm$0.83 mm; Recaptured II 5.96$\pm$0.66 mm and 8.02$\pm$0.35 mm; Recaptured III 5.97$\pm$0.73 mm and 7.82$\pm$0.37 mm; Recaptured IV 7.04$\pm$0.93 mm and 8.52$\pm$0.39 mm; Recaptured V 5.72$\pm$0.60 mm and 7.71$\pm$0.30 mm]. Our rearing experiment evidenced that the recaptured I-V populations are the offspring of the initial population and the offspring grew approximately 3 mm at 470 degree days. It was also estimated that N. pygmaea larvae need approximately 100 degree days to grow 0.7 mm in body length.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.3 s.258
• /
• pp.344-354
• /
• 2007

The objective of this study is to investigate the effect of arbitrarily located defect around the circular hole in the aircraft structural material such as Al/GFRP laminates and monolithic Al alloy sheet under cyclic bending moment. The fatigue behavior of these materials may be different due to the defect location. Material flaws in the from of pre-existing defects can severely affect the fatigue crack initiation and propagation behavior. The aim of this study is to evaluate effects of relative location of defects around the circular hole in monolithic Al alloy and Al/GFRP laminates under cyclic bending moment. The fatigue behavior i.e., the stress concentration factor($K_t$), the crack initiation life($N_i$), the relationship between crack length(a) and cycles(N), the relationship between crack growth rate(da/dN) and stress intensity factor range(${\Dalta}K$) near a circular hole are considered. Especially, the defects location at ${\theta}_1=0^{\circ}\;and\;{\theta}_2=30^{\circ}$ was strongly effective in stress concentration factor($K_t$) and crack initiation life($N_i$). The test results indicated the features of different fatigue crack propagation behavior and the different growing delamination shape according to each location of defect around the circular hole in Al/GFRP laminates.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.04a
• /
• pp.203-226
• /
• 2007

The purpose of this research is to analyze the impact of business scope and technological innovation capability(TIC) on firm performance in SMEs. Among the 1,077 SME sample data collected with the help of Korean Industrial Complex Corporation, 228 sample data from capital goods sectors had been selected and analyzed. Several mutiple regression models were developed to test the main and the interaction effects of two independent variables business scope and TIC on SME performance. The empirical analysis show that the number of product lines, one of the two scope variable measured, is positively correlated with the return on sales(ROS). Among the variable of TIC, the number of intellectual property rights(IPRs) is positively correlated with the sales growth rates of SMEs, which the ratio of engineers to total employees is positively correlated with the ROS of SMEs. The results also delineated some interaction effects of business scope and TIC on SME performance. There exists a positive interaction effect of the ratio of engineers to total employees and the number of product lines both on ROS and scales growth rate. The interaction of the number of customers and the number of IPRs positively effects on ROS, and also the interaction of the number of product lines and the number of IPRs are positively related with ROS. Findings of this research indicates that it is necessary for SMEs in capital goods sectors to accumulate technological innovation capability and to expand business scope to improve firm performance. Furthermore, the accumulation of internal TIC should accommodate with the expansion of business scope to gain an improved performance. Particularly, adequate technological innovation capability is required to address the need of expanded customers when enlarging the scope of customers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.1
• /
• pp.55-62
• /
• 2004

Although the previous researches evaluated the fatigue behavior of glass fiber/epoxy laminates using the traditional fracture mechanism, their researches were not sufficient to do it: the damage zone of glass fiber/epoxy laminates was occurred at the delamination zone instead of the crack-metallic damages. Thus, previous researches were not applicable to the fatigue behavior of glass fiber/epoxy laminates. The major purpose of this study was to evaluate delamination behavior using the relationship between crack length and delamination width in hybrid composite material such as Al/GFRP laminate. The details of investigation were as follows : 1) Relationship between crack length and delamination width, 2) Relationship between delamination aspect ratio and delamination area rate, 3) Variation of delamination growth rate is attendant on delamination shape factors. The test results indicated that the delamination growth rate depends on delamination width delamination aspect ratio and delamination shape factors.

• Journal of Periodontal and Implant Science
• /
• v.35 no.1
• /
• pp.153-161
• /
• 2005

파이브로넥틴은 세포외기질에 존재하는 당단백질로 세포의 부착, 이동, 성장 및 분화에 관여하며, 섬유아세포 성장인자는 세포의 증식 이동 및 분화에 영향을 주는 중요한 성장인자로 알려져 있다. 최근 연구에 의하면, 파이브로넥틴은 조골세포의 타이태늄 임플란트 표면으로 이주와 증식 및 골생성을 촉진하며, 섬유아세포 성장 인자는 파이브로넥틴에 상승작용을 한다고 보고된 바 있다. 이 실험의 목적은 파이브로넥틴 및 섬유아세포 성장인자의 복합 단백질을 이용하여 타이태늄 임플란트의 골 반응을 알아보는 것이다. 체중 2.5 kg 내외의 건강한 18 마리의 웅성가토를 준비하여 무균 사육하였고, 순수 타이태늄을 절삭가공하여 직경 3.5mm, 길이 6mm 의 machined surface를 지니는 screw type 의 임플란트를 준비하였다. 사람의 유전자를 기초로, 유전자 재조합법을 통해, 적절한 primer를 이용하여 얻은 섬유아세포 성장인자를 파이브로넥틴 III 형 분절의 9-10 번 도메인에 결합시켜 얻은 복합 단백질을 준비된 임플란트에 표면처리하여 실험군으로 하였고, 표면처리하지 않은 임플란트를 대조군으로 하여, 가토의 좌우 경골에 각각 2 개씩의 임플란트를 식립하였다. 4주 후, 가토를 희생시켜 각 경골 당 한 개의 임플란트에서 뒤틀림 제거력을 측정하였고 나머지 임플란트 식립 부위 에서는 경골을 포함하는 조직표본을 제작하였다. 조직표본상에서 골접촉이 가장 좋은 3 개의 나사산의 길이를 측정하고, 나사와 접촉하는 골의 길이를 측정하여 골-임플란트 접촉도를 구하고, 같은 부위에서 나사산 사이의 면적과 골이 차지하는 면적을 비교하여 골생성률을 얻었다. 실험군과 대조군의 결과는 Student t-test 를 이용하여 신뢰도 95% 수준에서 통계학적 유의성을 검정하였다. 파이브로넥틴과 섬유아세포 성장인자의 복합 단백질로 표면처리된 임플란트와 표면처리를 하지 않은 임플란트는 뒤틀림 제거력에서는 통계적 유의성이 나타나지 않았으나, 골-임플란트 접촉도와 골생성률에서 복합 단백질로 처리된 임플란트가 통계적으로 유의하게 높은 결과를 보였다. 이상의 연구결과로, 섬유아세포 성장인자와 파이브로넥틴 복합 단백질로 처리한 타이태늄 임플란트가 주변 골 형성을 촉진시켜, 골유합을 증진시킴을 알 수 있었다. 따라서, 복합 단백질이 타이태늄 임플란트의 성공률을 높이기 위한 표면개질 물질로 이용될 가능성을 확인할 수 있었다.