• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1737-1743
• /
• 2006

OCR(On channel repeater) provides the high frequency reuse efficiency for allocating frequency bands to repeaters because the frequency of input and output signals of OCRs is the same. However the oscillation probability of OCRs is high due to the same input and output frequency. In order to prevent a repeater from oscillating, we must keep the antenna isolation higher than the gain of the repeater with a some margin. In this paper we simulated the effects of the amplitude, phase and time delay of feedback signals (m the characteristics of non-regeneration OCR. Simulation results show that the highest probability of oscillation is occurred when the gain of a repeater is the same value of the isolation. From the simulation results, we know that the phase of feedback signals can be adjusted to reduce the possibility of oscillation if a non-regeneration repeater has a narrow operation bandwidth or a signal bandwidth is narrow. As the time delay increases, the probability of oscillation and the fluctuation of gain over a certain frequency band increase also. The effects of the amplitude and phase of feedback signals on S/N of 8-VSB signal for generation and non-generation repeater were tested. The measured results show that the set-top can receive 8-VSB signal when the received signal power is $17{\sim}18dB$ higher than the noise power. When the isolation is almost same as the gain of the repeater, then the set-top can not receive 8-VSB signals due to the oscillation of the repeater. And the phase of feedback signals affects S/N at the output of the repeater when the isolation is $11.75{\sim}13.75dB$ larger than the gain of the repeater. In this case the set-top can not receive 8-VSB signal of at $48^{\circ}\;and\;347^{\circ}$ of the phase of feedback signals. However the phase of feedback signals can not affect the S/N of 8-VSB signals of the generation repeater because of the demodulation and modulation process of the generation repenter. The set-top can not receive 8-VSB signals when the amplitude of feedback signals is $12.6{\sim}13.6dB$ larger than the wanted signal power at the input port of the repeater. It's because that the amplitude of feedback signals saturates the front end of the repeater.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.126-127
• /
• 2002

현재 광 자기 디스크에 대한 연구는 두 층으로 구성된 기록 층들을 이용하여 기록 층에 기록된 매우 작은 마크(0.1 um이하)를 리드아웃 층에서 도메인을 확장하여 재생 시 큰 신호를 얻는 도메인 확장형 광자기디스크(Magnetic AMpligying Magneto-Optical disk)에 대한 연구가 진행되고 있다[1]. 신호 재생시 레이저빔을 디스크에 집속시키면, 리드아웃 층의 스팟의 온도가 큐리 온도(Curie Temperature)까지 올라가게 되며, 이때 기록 층으로부터의 누설 자장에 의해 기록 마크 크기의 도메인이 리드아웃 층에 형성된다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.443-447
• /
• 1999

To investigate the effect of a shaded apodizer on the read-out signal in an optical disc system, we consider the is apodizer in which the amplitude transmittance decreases gradually from the center of pupil toward its edge and the iH apodizer in which the amplitude transmittance increases gradually from the center of pupil toward its edge, using the scalar diffraction theory. We also consider the bump shapes which are a cylindric, a semi-conic, and a conic bump, and bump height which is given by $\lambda/4$ and occurs to the phase change $(\pi)$). The read-out signal of is apodizer increases from S = 0 upto maximum value, and then decreases for increasingly larger values of bOo While the iH apodizer has two maximum values. When an optical disc system has a spherical aberration $(W_{40}=0.5\lambda)$, the maximum read-OUt signal of is apodizer is higher than that of iv apodizer which has no apodizer.odizer.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.34-39
• /
• 2007

Super-REsolution Near-field Structure (Super-RENS) 재생 현상을 모델링하고 재생 신호를 계산하여 실험 결과와 비교하였다. 약 2mW 내외의 높은 광 파워로 집광된 Spot 은 디스크 내의 상변화 물질인 GST 를 용융시키므로 집광 Spot 내에는 용융 영역과 비 용융 영역이 공존하게 되고 연속적 또는 불연속적인 경계를 이루게 된다. 이러한 열 효과로부터 기인하는 집광 Spot 내에서의 물질의 광학적 특성 변화와 변화 정도의 차이를 가정하였고 변화된 광학적 특성은 집광된 Spot 의 유효 크기를 줄어들게 함으로써 회절한계 이하의 정보를 재생 가능하게 한다. 계산은 FDTD 방법과 Scalar 방법을 병행하였다. FDTD 방법으로는 위와 같은 집광 Spot 내의 물질 굴절률 (n,k) 변화로부터 회절한계 이하의 정보가 재생 가능함과 CNR 문턱 현상을 확인하였고, Scalar 방법으로는 물질 굴절률을 직접 다루지 않고 굴절률 변화로부터 기인하는 광의 Amplitude 와 Phase 변화로부터 회절한계 이하의 정보가 재생 가능함을 확인하였다. 이 때 광의 Amplitude 와 Phase 변화를 모델링하기 위하여 지름, 위치, 반사율 변화량, 위상 변화량의 네가지 변수로 정의되는 광 마스크를 도입하였다. Scalar 방법을 이용하여 재생 RF 신호 등 다양한 Super-RENS 디스크의 신호를 계산 활용 할 수 있고 다음의 두가지 광학계에 대하여 계산과 실험으로 얻은 채널 특성 및 RF 신호를 비교하여 각각 오차평균 4.2%, 4.7%로 일치함을 확인하였다. 파장 659nm, NA=0.6, Min Pit Length=173nm ROM 디스크 System, 파장 405nm, NA=0.85 Min Mark Length=75nm WORM 디스크 System.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.126-135
• /
• 2003

To investigate the DTV coverage especially in downtown areas and improve the performance of DTV receivers, it is necessary to capture the receiving DTV signals that contain the complex characteristics of the real-world RF environments and regenerate them in a laboratory without the performance degradation. In this paper, we developed a DTV RF capture and regeneration system adapting digital signal processing and high speed hard disk storage techniques and analyze its characteristics. The system can capture and replay the DTV RF signals based on a real-time condition in a hard disk. There Is no time limit for capturing RF data within the installed storage capacity. We can expect various Possible applications for this system such as a tool for the development of the receiver performance analysis, design and analysis for the DTV coverage areas, etc.

• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.387-393
• /
• 1996

진단 시스템에 대한 필요성과 관심이 높아가고 있는 가운데 진단 방법의 수준과 진단 시스템의 조건 등을 살펴보았다. 물론 언급되어진 사항들이 일률적으로 모든 진단 시스템에 적용이 된다고는 말할 수는 없다. 왜냐하면 진단 시스템은 진단 의 대상, 진단의 종류 등에 따라서 각각 최선의 방법이 따로 존재하기 때문이다. 그러나 고통적인 사항은 진단 신호를 얼마나 잘 재생해 내는가에 따라 진단의 성공 여부가 달려 있다는 사실이다. 기계진단 신호 처리의 예에서 살펴보았듯이 신호 처리 방법에 따라 재생된 신호의 정확도는 달라질 수 있다. 계속적인 새로운 진단 기술의 개발과 응용으로 안전적이고 경제적인 공장 운영과 공장의 자동화에 크게 기여할 수 있기를 바라며, 좀 더 많은 관심을 갖고 기계 진단의 기술을 활용할 수 있기를 기대한다.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.434-439
• /
• 1996

To investigate influence of the incident beams which have the truncated Gaussian amplitude and of the shapes of bump on read-out signal is an optical disc, and the point spread function on bump, the scalar diffraction theory is used in this paper. We consider the truncated Gaussian amplitudes which are $\sigma$=0, 0.5, 1.5, and 2.5, the height of bump which is given by $n{\Delta}_0={\lambda}/4$, and the phase height of bump which is then given by ${\Phi}_0={\pi}$. We also consider the shapes of the bump which are a rectangular shape, a frustoconical shape, and a conical shape. It is shown that as the truncation of incident beam reduces the radius of central spot on bump decreases, the maximum value of read-out signal increases, and that the size of bump decreases. From these results, we get better read-out signal and the reduced cross-talk in optical disc when the truncation of incident beam reduces. Therefore a laser beam having less truncated Gaussian amplitude may useful for an actual optical disc.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.4
• /
• pp.33-38
• /
• 2001

Readout signal of high density DVD-RAM disk output was simulated to analyze the effect of crosserase and crosstalk to the readout signal which is one of the main difficulties to realize high density DVD-RAM system having single side recording density of 4.7 G13 and 15 G13 media. Laser beam intensity impinged on the disk was approximated as Gaussian and recorded marks were assumed elliptical and the readout signal was calculated as a two dimensional convolution of laser beam pattern and recored mark pattern. From the readout signal obtained by varying crosserase ratio, carrier levels with period of 3T to 11 T were calculated and compared. Jitter due to crosserase and crosstalk was calculated and compared using 1,000 random marks having 3T to 11T period. The results showed that the jitter due to crosserase turned out to be smaller than the jitter due to crosstalk.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2807-2808
• /
• 2003

말초 신경계에서 손상된 신경은 그 손상된 정도에 따라 재생의 정도가 달라진다. 이러한 신경 재생의 정도를 확인할 수 있는 방법으로 초미세 전극 어레이 기술이 연구되고 있는데 이것은 전기신호경로(via hole)를 초미세 전극어레이를 제작하여, 손상된 신경의 근위부(proximal stump)와 원위부(distal stump) 사이에 직접 삽입하여 선경으로부터 재생되어온 신경 섬유의 전기적 전도 선호를 측정 및 기록하는 것이다. 이는 신경 재생을 관찰하는 방법으로서 신경보철(neural prostheses) 기술에 이용된다. 따라서, 본 논문에서는 손상된 신경의 재생을 관찰하기 위한 implantable microelectrode array system을 설계하고, 원 신호인 선경 전도 신호의 특성과 제작된 이식형 초미세전극(implantable microelectrode)의 특성을 고찰하며, 동물 실험을 통하여 그 성능을 검증하였다.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.997-1004
• /
• 2012

In this paper, we propose and implement a signal quality measurement algorithm for CDMA2000 1x terminal. The proposed algorithm is suitable to be implemented in software on a PC-based platform and extract the received signal after carrying out equalization, PN code acquisition and tracking, frequency and phase offset compensation with 4-oversampled input signal. Then, through despreading and demodulation with the extracted signal, the proposed algorithm regenerate the reference signal to be used in measurement. The signal quality is measured using this regenerated signal and the extracted signal.