• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.141-141
• /
• 2023

본 연구에서는 음향센싱 기법을 활용하여 소류사량 계측이 가능한 센서인 파이프 하이드로폰을 2가지 형태로 개발하여 설치 형태에 따른 소류사량 계측 성능을 비교·분석하였다. 파이프 하이드로폰은 수리구조물 끝단에 설치하는 부착식 하이드로폰과 하천 하상에 설치 가능한 형태로 제작하였으며, 파이프 하이드로폰의 실내 실험을 위한 수리실험장치를 구축하였다. 소류사 음향 데이터를 수집 및 저장하기 위해 National Instrument사에서 개발된 LabVIEW 언어를 이용하여 데이터 분석 프로그램을 개발하였으며, 데이터를 시계열 그래프로 표출하여 센서를 통해 계측되는 소류사의 특성을 분석하였다. 분석 결과 하천 하상 설치 형태의 파이프 하이드로폰은 후류가 발생하여 센서 후면으로 소류사가 재충돌되는 현상이 발생하였으며, 이에 6~9% 정도의 과다 산출되는 것을 확인할 수 있었다. 또한 소류사가 센서에 퇴적되어 지속적인 데이터를 취득하기에는 적합하지 못할 것으로 판단되었다. 동일한 조건으로 실험한 부착식 하이드로폰은 후류로 인한 재충돌 현상 및 퇴적현상 또한 발생하지 않았으며, 소류사량 추정 결과 90.9%로 양호한 수준의 성능이 확인되었다.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.5
• /
• pp.451-456
• /
• 2015

This study aimed to evaluate of the hardened properties (mortar consistency, setting time, absorption properties, drying shrinkage, and bond strength) of the basalt powder sludge mortar recycling a basalt powder sludge occurred during the manufacture process of basalt stone as a replacing material for the sea-sand used to cement filling compound for surface preparation. The hardened mortar made of the basalt powder sludge showed an enhanced performance or similar with the properties of normal mortar used to cement filling compound for surface preparation. But, the drying shrinkage was increased more than a normal cement mortar in the hardened mortar made of the basalt powder sludge since curing 8 - 9days. And the bond strength is low in the hardened mortar used the basalt powder sludge. On the whole, properties of the hardened mortar used the basalt powder sludge correspond to the required minimum quality criterion in the KS F 4716 'cement filling compound for surface preparation'.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.751-759
• /
• 2008

In this study, the effect of an unsteady flow field around a body of aerostatic/aerodynamic forces were investigated using rectangular cylinders (B/D = 2, 3, 4, 5). Proper orthogonal decomposition (POD) was introduced to the analysis of the fluctuating pressure field that was measured on the stationary/oscillatory B/D=4 rectangular cylinder, and the characteristics of the proper functions with flow patterns were identified. In addition, the physical decoupling and interactions in the different co-existing flow patterns were investigated through POD. The comparison with the identified proper function associated with a particular flow pattern revealed that the Karman vortex is almost not affected by the separation bubble, but that the Karman vortex considerably interferes in the development of the separation bubble around the trailing edge. It can be considered that the Karman vortex induces the increment of the curvature of the substantial separated flow.

• Clinics in Shoulder and Elbow
• /
• v.10 no.2
• /
• pp.155-159
• /
• 2007

Arthroscopic single-row rotator cuff repair is a well established surgical technique for the treatment of rotator cuff tears. However, the problem of postoperative retear remains a concern. Various avenues are being explored to address this problem. Some studies have suggested that restoring the anatomical footprint may improve the healing and initial strength of the repaired rotator cuff tendon. The double-row technique was introduced as a method of reconstructing the anatomical footprint. According to biomechanical studies on cadavers, this technique improved mechanical strength and reduced gap formation. However, the biological properties of reattached tendon such as tension, and vascularity have not been proved yet. Furthermore, the apparent mechanical superiority of the double-row over the single-row construction has not resulted in better functional outcomes. Therefore, the less complicated and less costly single-row technique is still the recommended treatment for rotator cuff repairs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.747-756
• /
• 2008

The purpose of this paper is to investigate the effect of the important parameters on the transfer length during the dynamic flame cutting of tendon experimentally. The considered parameters were strand diameter, concrete cover thickness, stirrup, debonding strand and release method. Ten pretensioned concete beam specimens were cast and tested. Time history curves for the axial strain of tendon were measured by electrical resistance strain gauges mounted on the strands. Experimental results indicated that large dynamic shock effects occurred near cut-end during the sudden release. The prestressing forces are dependent on the parameters above considered. The ratio of residual prestressing forces of 12.7 mm strands is greater than 15.2 mm strands. Using debonding strand and gradual release are more efficient for applying prestressing forces.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1A
• /
• pp.15-26
• /
• 2010

Quasi-static tests were conducted to evaluate structural performance of precast piers prestressed by bonded prestressing steels. Combinations of prestressing bars and normal reinforcing bars, embedded steel tubes and prestressing strands were used as continuous steels crossing the joints of a precast pier. Main design parameters were steel ratio, magnitude of prestress force, and section details. Flexural strength and energy dissipation capacity of precast columns with higher steel ratio showed better performance due to continuous steels after opening of the joints. Precast piers with embedded members showed stable behavior after reaching maximum loads resulting in higher displacement ductility and energy dissipation capacity increased as the introduced prestress increased. Self-centering behavior at early stages and stress increase of confining reinforcements were observed from highly prestressed columns. Combination of prestressing steels and normal reinforcing bars should be used in design to prevent rapid strength degradation after reaching the maximum load.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.117-126
• /
• 2021

An experimental study was carried out to investigate the applicability of cement-based materials for green soil which is a soil for promoting plant growth. The results show that the shear strength of the green soil mixed with gypsum cement (No.3) was low, but the hardness (23.6mm) and pH value (7.4) was most suitable for the vegetation environment. In addition, the initial vegetation germination of green soil, which improved performance by adding a moisturizer, was slower than that of general green soil, and the conductivity value tended to be slightly higher. On the other hand, the slope adhesion of advanced green soil was high, and it was found that the plant growth rate and the regeneration capacity were superior after time passed.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.351-358
• /
• 2007

Unlike external bonded steel plate or carbon fiber, the external unbonded strengthening using hi-strength bar has some advantages in speed and simplicity of installation. It is not required surface preparations and not affected by environmental conditions. A set of nine laboratory tests on RC beams strengthened using the hi-tension bars are reported. Anchoring pin developed in former research is installed at the end of beam to connect the hish-tension bar to RC beam. The test results strengthened by hi-tension bars are compared with those of non-strengthened specimens. The main test parameters are the cross-sectional area of the high-tension bar, distance of stirrups and condition of supports. Test results show that the beams reinforced are superior to reference specimens, especially for the strength and deformation capacity. Also, shear resisting effect of hi-strength bar can be confirmed in the specimens which have lack of stirrups.

• The Journal of the Korean bone and joint tumor society
• /
• v.10 no.2
• /
• pp.96-106
• /
• 2004

Purpose: To determine the usefulness of limb salvage operation with recycled autogenous bone graft in musculoskeletal malignant tumors. Materials and Methods: Twenty nine cases, who underwent limb salvage operation with recycled autogenous bone graft for the treatment of musculoskeletal malignant tumor between February 1990 and January 2003, were included. There were 18 males and 11 females and the mean age was 33 years (range, 10 to 65 years). The mean follow-up period was 51.8 months (range, 18 to 117 months). The Enneking stage was IIA in 10 cases and IIB in 19 cases. The recycling method of autogenous bone was deep freezing in 6 cases, autoclaving in 11 cases, pasteurization in 7 cases and the composite of autoclaving and vascularized fibular graft in 5 cases. The union of junctional site was evaluated radiologically and the functional results was analyzed by the grading systems of the International Symposium On Limb Salvages (ISOLS). Results: The mean union time was 7.2 months (range, 3 to 15 months). The union took 5.8 months (range, 4 to 8 months) in deep freezing, 9.7 months (range, 6 to 15 months) in autoclaving, 5.9 months (range, 4 to 8 months) in pasteurization, and 5 months (range, 4 to 8 months) in the composite of autoclaving and vascularized fibular graft. The mean functional evaluation percentage was 76.8% (range, 40 to 90%). It was 65.8% (range, 40 to 85%) in deep freezing, 76.6% (range, 40 to 90%) in autoclaving, 81.6% (range, 70 to 90%) in pasteurization, and 83.4% (range, 75 to 90%) in the composite of autoclaving and vascularized fibular graft. There were 6 cases of complications including 1 case of local recurrence, lung metastasis, infection, fracture, respectively and 2 cases of nonunion. Conclusion: The limb salvage operation with recycled autogenous bone graft is a useful treatment method for the musculoskeletal malignant tumors. Particularly, autoclaving is the most reliable sterilization method. The vascularized fibular graft can compensate decreased osteoinductivity and mechanical strength of recycled bone. So, the composite of autoclaving and vascularized bone graft seems to be a favorable treatment method for high grade malignant musculoskeletal tumors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.395-402
• /
• 2005

In considering the healing process of injured periodontal tissue, healing rate would be influenced by the cellular activity of periodontal fibroblasts(PDLFs). In addition, the reattachment among PDLFs should be induced for healing process. The purpose of this study was to evaluate the effects of epidermal growth factor(EGF) on the proliferation and attachment of PDLFs and to verify the efficacy of EGF as a storage media or a pre-replantation conditioner of traumatically avulsed tooth. Human recombinant epidermal growth factor(hrEGF) and human periodontal fibroblasts from first premolar were prepared. At first, MTT assay was done to evaluate the toxic effect on human periodontal fibroblast and the maximum cellular growth of EGF. Cellular proliferation rate was then compared between control group and 10ng/ml EGF added group. Also, western blot was done to evaluate the expression of fibronectin in both groups. The results were as follows: 1. From MTT assay, EGF showed no toxic effect on PDL fibroblasts. The highest proliferation was shown at 10ng/ml EGF. 2. In 10ng/ml EGF added group, the degree of proliferation of PDLFs was significantly higher than that in control group. 3. Fibronectin expression of EGF added group was also significantly higher than that of control group. From this study we could conclude that EGF enhanced the regeneration rate of periodontal fibroblast, which could be used as a pretreatment agent or a storage media for traumatically avulsed teeth.