Browse > Article
http://dx.doi.org/10.4334/JKCI.2007.19.3.351

An Experimental Study on Flexural Behavior of RC Beams Strengthened with Hi-Strength Bars(3)  

Shin, Kyung-Jae (Dept. of Architectural Engineering, Kyungpook National University)
Kim, Yoon-Jung (Dept. of Architectural Engineering, Kyungpook National University)
Moon, Jeong-Ho (Dept. of Architectural Engineering, Hannam Univ.)
Publication Information
Journal of the Korea Concrete Institute / v.19, no.3, 2007 , pp. 351-358 More about this Journal
Abstract
Unlike external bonded steel plate or carbon fiber, the external unbonded strengthening using hi-strength bar has some advantages in speed and simplicity of installation. It is not required surface preparations and not affected by environmental conditions. A set of nine laboratory tests on RC beams strengthened using the hi-tension bars are reported. Anchoring pin developed in former research is installed at the end of beam to connect the hish-tension bar to RC beam. The test results strengthened by hi-tension bars are compared with those of non-strengthened specimens. The main test parameters are the cross-sectional area of the high-tension bar, distance of stirrups and condition of supports. Test results show that the beams reinforced are superior to reference specimens, especially for the strength and deformation capacity. Also, shear resisting effect of hi-strength bar can be confirmed in the specimens which have lack of stirrups.
Keywords
high-tension bar; prestress; post tension; unbonded bar; reinforcing;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 박용걸, 박영훈, 이승용, '외부 후 긴장 공법을 이용한 강합성보의 보강에 관한 연구', 한국강구조학회 논문집, 12권 5호, 2000, pp.549-558
2 Naaman, A. E. and Alkhairi, F. M., 'Stress at Ultimate in Unbonded Post-Tensioning Tendons: Part l-Evaluation of the State-of-the-Art', ACI Structural Journal, Vol.88, No.5, 1991, pp.641-651
3 Harajli, M. H., Khairallah, N., and Nassif, H., 'Externally Prestressed Members: Evaluation of Second-Order Effects', J. of Struct. Engr., Vol.125, No.10, 1990, pp.1151-1161
4 Harajli, M. H. and Hijazi, S. A., 'Evaluation of the Ultimate Steel Stress in Partially Prestressed Concrete Members', PCI Journal, Vol.36, No.1, 1991, pp.62-82
5 민락기, 오창열, '포스트텐셔닝을 이용한 기존 구조물의 보강', 콘크리트학회지, 8권 4호, 1996, pp.65-75
6 문정호, 박성운, '포스트텐션 바닥판 시스렘의 설계와 공법. 시공 사례', MIDAS 구조기술강좌, 2004. 2, pp.21-27
7 한국건설교통기술평가원, '고장력 인장봉과 인장력 측정 장치를 이용한 건축구조물 보강방법개발', 2003년 연차 실적보고서, 2005
8 Naaman, A. E. and Alkhairi, F. M., 'Stress at Ultimate in Unbonded Post-Tensioning Tendons: Part 2-Proposed Methodology', ACI Structural Journal, Vol.88, No.6, 1991, pp.683-692
9 신경재, 곽명근, 배규웅, 오영석, 문정호, '고장력 인장봉 으로 보강된 RC보의 휩거동에 관한 실험적 연구(2)', 콘크리트학회지, 18권 5호 2006, pp.603-310   과학기술학회마을   DOI
10 Harajli, M. H., 'Effect of Span-to-Depth Ratio on the Ultimate Steel Stress in Unbonded Prestressed Concrete Members', ACI Structural Journal, Vol.87, No.3, 1990, pp.305-312
11 Harajli, M. H., 'Strengthening of Concrete Beams by Extemal Prestressing', PCI Journal, Vol.38, No.6, 1993, pp.76-88