• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.183-186
• /
• 2010

최근 전 세계적으로 전자여권을 도입하기 위한 연구가 미국을 중심으로 활발히 진행되고 있다. 또한 전자여권은 비접촉식 스마트카드 기능의 IC(Integrated Circuit) 칩에 사용자의 정보와 바이오정보 그리고 여러 보안 기능들을 포함함으로써 기존의 여권에서 발생하는 문제점들을 해결하고 있다. 그러나 기존의 RFID(Radio Frequency Identification) 기술에서 발생하는 데이터 위변조, 도청, 무단복제 및 바이오정보 노출 등의 문제점들을 아직 내재하고 있다. 따라서 본 논문에서는 현재 필수로 적용되는 BAC 메커니즘을 조금 더 안정적이고 효율적으로 개선한 EBAC 메커니즘을 제안한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.624-627
• /
• 2015

IoT 환경에서는 자원 제약적인 디바이스가 보안이 취약한 무선 네트워크에 연결될 가능성이 존재한다. 초저전력 디바이스를 지원하는 무선 네트워크 표준 DASH7 Mode 2는 보안 분야 표준화가 진행 중이며 다양한 취약점에 대한 해결 방안을 모색 중이다. 따라서 본 논문에서는 DASH7 환경에서 IoT 표준 프로토콜인 CoAP를 이용하여 안전한 메시지 전송을 위한 프로토콜을 제안하였다. 또한 데이터 위변조, 재전송 및 가장 공격에 대한 안전성에 대하여 분석하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1405-1410
• /
• 2015

In this study we designed the radiation-hardened sensor signal processing modules that can be commonly used for a variety of sensors during normal operation and even in high-radiation environments caused by an accident. First development module was designed to receive the change of the R and C value from the sensors and to process the signal as a PWM modulation scheme. This module was assessed to have ± 10% error to the Full-Scale in the radiation test in the range of 12 kGy TID. The main cause of the error was analyzed as the annealing of the common circuit in the switching element and the consequent increase in the duty ratio of the pulse width modulation circuit according to the radiation dose increasement. The redesigned module for higher radiation resistivity with Stub transistor circuit was found to have less than 5% error to the Full-scale from the radiation test results for 20.7 kGy TID range.

• KIISE Transactions on Computing Practices
• /
• v.23 no.8
• /
• pp.504-509
• /
• 2017

Preserving the integrity of the booting process is important. Recent rootkit attacks and subverting OS attacks prove that any post-OS security mechanism can be easily circumvented if the booting process is not properly controlled. Using an actual case as an example, the hacker of the Se-jong government office simply bypassed the user's password authentication by compromising the normal booting process. This paper analyzes existing pre-OS protection using secure boot and measured boot, and proposes another bootloader that overcomes the limitations. The proposed bootloader not only guarantees the integrity of all the pre-OS binaries, bootloaders, and kernel, it also makes explicit records of integrity in the booting process to the external TPM device, so that we can track modifications of BIOS configurations or unintended booting process modifications.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.439-444
• /
• 2002

In this paper, we present both the link budget analysis according to system parameters and the cell coverage according to transmitter power and modulation scheme of digital MMDS among the wireless CATV system methods which is bated on the wireless internet service. Also, in this paper, we present C/I and number of subscriber according to splitting cell. In this paper, the cell coverage of which obtain the results according to both transmitter power from 0dBW to -9dBW and modulation scheme of QPSK, 16QAM and 64QAM based on link budget was analysis for system parameter of digital MMDS was able to provide from maximum 134km to minimum 4.3km. Also, in this paper, the number of subscriber of which obtain the results according to polarization wave, frequency of frequency reuse and C/I in 4. 6 and 8 sectors was able to provide from maximum 5,200DSI to minimum 1,300DSI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.645-654
• /
• 2012

In this paper, we consider a two-way relay (TWR) system, where two user nodes exchange their information within two transmission phases, by the help of a relay node adopting physical layer network coding. In the system, two users transmit their binary phase shift keying symbols simultaneously in the first phase, and the relay node decodes the XORed version of two user data and broadcasts it back to two users in the second phase. The performance of the system is analyzed in terms of the average end-to-end symbol error probability in Nakagami-m fading channels, for which a tight upper bound is derived in a closed form to provide an accurate and handy estimate on the performance. The results show that our upper bounds are almost indistinguishable from simulation results for various channel and system configurations. In addition, the optimal relay location and power allocation for various conditions can be obtained quickly with our analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.856-858
• /
• 2013

The data which is sensed on USN(Ubiquitous Sensor Network) environment is concerned with personal privacy and the secret information of business, but it has more vulnerable characteristics, in contrast to common networks. In other words, USN has the vulnerabilities which is easily exposed to the attacks such as the eavesdropping of sensor information, the distribution of abnormal packets, the reuse of message, an forgery attack, and denial of service attacks. Therefore, the key is necessarily required for secure communication between sensor nodes. This paper proposes a KDPC(Key Distribution Protocol based on Cluster) using ECDH algorithm by considering the characteristics of sensor network. As a result, the KDPC can provide the safe USN environment by detecting the forgery data and preventing the exposure of sensing data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.662-668
• /
• 2013

Mobile communication systems have been adopting link adaptive transmission schemes such as adaptive modulation and coding (AMC) and hybrid-ARQ (HARQ). Incremental redundancy (IR) HARQ scheme is known to be highly efficient in terms of throughput and power consumption and can be a good solution for mobile communication systems. In this paper, we propose an IR-HARQ scheme based on dual-diagonal parity-type block LDPC codes in which we define a transmission priority of coded bits and propose the sub-packet construction rule. We present the throughput performance of IR-HARQ with various modulation and coding and multi-antenna modes. Consequently, the proposed scheme provides the improvement of system throughput by elaborate link adaptation with CQI information.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.17-24
• /
• 2006

The optical feedforward is known as a complicated technique in spite of its superior linearization. Here we optimized the feedforward circuit parameters using a systematic approach for optimum efficiency. A systematic approach was verified by transmission experiments of 2.14 GHz two tones. The compared third order IMD was enhanced by 38 dB for two-tone case. The experimental results for transmission of W-CDMA signals were described. The ACPR was enhanced by 20 dB for 1 W-CDMA carrier and by 16 dB for 3 W-CDMA carriers. Also, noise level was reduced by 7 dB.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.175-181
• /
• 2008

We develop a fiber optic acceleration sensor with LED, PD, POF, and a cantilever beam, having film grating at the edge of the beam. Light is transmitted from LED to PD through the film grating. When the cantilever beam moves by external vibration, output light is modulated as sinusoidal signals. The characteristics of output signals are dominated by the spacing of the film grating and also by the size and the elasticity of the beam. Two output signals, having constant initial phase difference, are obtained by two gratings with 90 degree phase difference. Those two signals are used to determine phase angle, which is proportional to the displacement of the beam. Finally, the acceleration is determined from conversion equation between displacement and acceleration. This sensor is designed for monitoring the vibration of large and complex building in the low frequency range of below 7 Hz, and is particularly suitable to measure acceleration in electromagnetic environments.