• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7990-8000
• /
• 2015

Plant factories are plant cultivation systems which produce farm products uniformly under the controlled environmental condition regardless of seasons and places. Thermal flow in the plant factory is an important parameter in cultivating plants. In this research, we study thermal flow characteristics for a hybrid plant factory with multi-layer cultivation shelves using computer simulation techniques. In order to obtain numerical solutions for thermal flow characteristics, a finite volume method was applied. We consider a low-Reynolds-number ${\kappa}-{\epsilon}$ turbulence model, incompressible viscous flows, and pressure boundary conditions for numerical simulation. Commercial software Solid Works Flow Simulation is then used to investigate characteristics of thermal flows in the plant factory applying several different inflow air velocities and arrangements of cultivation shelves. From numerical analysis results, we found that temperatures in cultivation shelves were uniformly distributed for Case 3 when the inflow air velocity was 1.6 m/s by using a blower in the plant factory. However in Case 1 lower temperature distributions were observed in test beds, TB2 and TB3, which indicated that additional temperature control efforts would be required. Average shelf temperature increased by $3^{\circ}C$ using artificial light source (DYLED47) with 50% blue and 50% red LED ratios. Korea Academia-Industrial cooperation Society.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.3
• /
• pp.172-178
• /
• 2009

This experiment was conducted to elucidate the proper suppling frequency of nutrient solution for grafted cactus Gymnocalycium mihanovichii var. friedrichii grown hydroponically without medium. Grafted cactus seedlings were planted onto the cultivation bed without medium, using labor-saving tray. The treatments like 1, 3, 5 and 7 times of nutrient solution supply per day and continuous soaking of plant root in the nutrient solution during the daytime were tested in summer and winter season. The growth of grafted cactus was worst in the treatment of one time supply of nutrient solution per day, and there were not significant difference in growth of grafted cactus among other treatments both in summer and winter season. 17.6% of grafted cactus seedlings failed to rooting in the treatment of one time supply of nutrient solution per day in winter season. The proper suppling frequency of nutrient solution, for the grafted cactus Gymnocalycium mihanovichii var. friedrichii grown hydroponically without medium, was three times supply of nutrient solution per day both in summer and winter seasons considering growth and rooting of plants.

• Journal of Bio-Environment Control
• /
• v.8 no.3
• /
• pp.209-215
• /
• 1999

In order to develop facility for complex farming with aquaculture and vegetable nutrient culture and to investigate growth of tilapia and water quality in the channel type aquaculture system, these experiments were carried out. When tilapia(Tilapia nilotica) was reared in the channel type aquaculture system, Quality of culture water and growth of tilapia were normal. And the growth of tilapia in the channel type and round type aquaculture system was much the same. Channel type aquaculture facilities was applicable to the dual culture system for aquaculture and vegetable culture. Channel type integrated system was composed of aquaculture and sandculture bed, and it was thought that suitable size of the system was about 1.4m(width) $\times$ 1m(height) $\times$ 20m(length).

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.05a
• /
• pp.122-127
• /
• 1998

(1) 급액천의 규격별 양액공급량 $\bigcirc$ 합섬(비스코스＋레이온) : 시간당 소(12.6ml), 중(21.2ml), 대(57.5ml)의 순으로 유입되었으며 중과 대의 급액천의 유입은 거의 같아 급액천의 규격간에 공급량은 비례하지 않았다. $\bigcirc$ 합섬(폴리에스텔) : 소(4.3ml), 중(20ml), 대(57.5ml)순으로 양액이 유출되었으며, $\bigcirc$ 합섬(인견) : 소(2.9ml), 중(23.7ml), 대(32.3ml)순으로 유입되었으나 소(급액천)의 유출량은 적어 급액천 재질로서 부적합하다고 생각되었으며, $\bigcirc$ 실(cotton) : 소(0.2ml), 중(3.0ml), 대(2.7ml)순으로 규격간에 유입은 차이가 없었으며 전체적으로 유출이 적어 급액천으로서는 부적합하였다. (2) 배지의 규격(종류)별 양액의 유입량 $\bigcirc$ 송이(Ф6.0mm~12.0mm이상) : 배지의 입자가 굵은 배지일수록 급액초기 1~2시간이 유입이 급격히 증가하였으나 시간이 경과할수록 일정한 량을 보였으며 유입량은 다른 배지에 비하여 많았고 급액천의 규격이 클수록 유입되는 량이 많았으나 시간이 경과함에 따라 감소하는 경향을 보였다. $\bigcirc$ 송이(Ф1~5mm) : 합섬A(비스코스+레이온)과 합섬B(폴리에스텔)에서는 시간당 15.0~50.1ml가 유입되었으나 합섬C(인견)과 실에서는 시간당 10ml이하로 토출량이 적었다. $\bigcirc$ 송이(Ф1~12mm) : 합섬A와 합섬B 급액천에서는 17.0~53.8ml가 유입되었으나 합섬C와 실에서는 시간당 평균 4.0~21.2ml가 흘러나와 배지의 공극이 일정하지 않아 시간당 통과하는 양이 일정하지 않았다고 생각되었다. $\bigcirc$ 펄라이트 : 합섬A(비스코스+레이온)급액천의 유입은 소(1$\times$60cm)에서 21.8ml, 중(2$\times$60cm) 33.5ml, 대(3$\times$60cm) 43.4ml가 통과되었고 합섬(폴리에스텔)에서는 19.0~30.7ml로서 급액천의 규격에 따라 통과되는 차이가 있었다. 배지가 규격화되어 있어 급액천의 규격별로 일정하게 유입되었으며 급액천의 재질이 유입에 영향을 미친 것으로 사료되었다. (2) 급액관과 베드상과의 높이에 따른 유출양 : 급액과 베드상과의 낙차가 클수록 유출이 증가함을 알수 있었으나 합섬C(인견)실험구에서는 낙차가 유출에 영향을 미치지 않았다. (4) 급액된 양액의 EC 및 pH조사 : 급액된 양액의 EC 및 pH에 전혀 변화가 없어 재배 적응에 문제가 없을것으로 사료되었다.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.234-240
• /
• 2013

The purpose of this study was to provide basic data used in greenhouse design, and for this purpose, the crop loads of tomato and paprika which have high crop load among crops cultivated in greenhouse were measured. The maximum differences in lowest and mean temperatures between cultivation year and normal years for winter season were -5.6 and $-4.9^{\circ}C$, respectively and those for summer season were 3.0 and $1.5^{\circ}C$, respectively. The calibration of push & pull gauge indicated approximate 0.99 of coefficient of determination, representing very high association. The planting densities of paprika and tomato were 3.43, 3.56 and $2.13plants{\cdot}m^{-2}$, respectively. The yields were 4.1, 4.3 and $16.2kg{\cdot}plant^{-1}$, corresponding to 14.1, 15.2 and $34.5kg{\cdot}m^{-2}$ of yield per unit area. The maximum loads were 1.3, 1.5 and $3.3kg{\cdot}plant^{-1}$, respectively. When the paprika were hanged on cross beam, the total crop load applied to it was estimated to be $15.3{\sim}15.9kg{\cdot}m^{-2}$, and when the weights of gutters supporting the cultivation beds, the total weights were $26.0{\sim}26.9kg{\cdot}m^{-2}$.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.217-225
• /
• 2004

This study was performed to provide the basic knowledge about the mushroom cultivation facilities. Classified current status of cultivation facilities in Gyeongnam province was investigated by questionnaire. The structure of Pleurotus eryngii cultivation facilities can be classified into the simple and permanent frame type. The simple frame structures were mostly single-span type, on the other hand, the permanent frame structures were more multi-span than simple structures. And the scale of cultivation facilities was very different regardless of structural type. But as a whole, the length, width and ridge height were prevailing approximately 20.0 m, $6.6\~7.0m$ and $4.6\~5.0m$ range, respectively. The floor area was about $132\~160\;m^2$, and floor was built with concrete to protect mushrooms from various harmful infection. The roof slope of the simple and permanent type showed about $41.5^{\circ}\;and\;18.6\~28.6^{\circ}$, respectively. The width and layer number of growing bed for mushroom cultivation were around $1.2\~1.6m$, 4 layers in common, respectively. Most of year round cultivation facilities were equipped with cooler, heater, humidifier, and ventilating fan. Hot water boiler was the most commonly used heating system, the next was electric heater and then steam boiler. The industrial air conditioner has been widely used for cooling. And humidity was controlled mostly by ultra-wave or centrifuging humidifier. But some farmers has been using nozzle system for auxiliary purpose. More then $90\%$ of the mushroom house had the independent environment control system. The inside temperature was usually controlled by sensor, but humidity and $CO_2$ concentration was controlled by timer for each growing stage. The capacity of medium bottle was generally 850 cc and 1100cc, some farms used 800 cc, 950 co and 1,250 cc. Most of mushroom producted has been usually shipped to both circulating company and joint market.

• Horticultural Science & Technology
• /
• v.17 no.3
• /
• pp.355-360
• /
• 1999

This study was carried out to investigate the effect of irrigation frequency, particle size and depth of perlite medium on the growth of Dendranthema grandiflorum (Ramat.) Kitamura 'Shuhouno-chikara' grown on recycling system. In Exp 1, the irrigation frequency (IF) was designed as 3 (IF3), 9 (IF9), and 18 (IF18) times a day. Fine and coarse particle size (PS) of perlite was used as a media, and depth of media (DM) was 15 and 10 cm contained in $34{\times}120{\times}15cm$ styrofoam bed. In Exp 2, the IF was 3 (IF3), 6 (IF6), and 9 (IF9) times a day with the same amount of nutrient solution. Fine and coarse PS were used, and DM was 15 and 7.5 cm. In this study, high IF and fine PS was favorable for plant growth. However, as the IF became frequent, difference of plant growth between fine and coarse PS became smaller. Also, shallow media showed little difference with deep media in plant growth. Thus, decreasing the amount of media was recommended to reduce the production cost.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.367-372
• /
• 2001

'Kyoho' grape (Vitis labruscana L.) has currently cropped twice a year in plastic greenhouses. However, there are problems with low fruit quality in the second cropping owing to low temperatures and short photoperiods. This experiment was conducted to investigate the effect of root zone heating and $CO_2$ enrichment in plastic greenhouse on the vine growth and fruit quality of 'Kyoho' grape in double cropping system. The internode length of shoots, leaf area and leaf dry weight at the treatment of soil heating near root zone was significantly different regardless of $CO_2$ enrichment. There were no significant differences in fruit bunch and berry weight, titratable acidity, coloration degree and berry shattering among the treatments, but the soluble solids significantly increased by root zone heating. Photosynthetic rate increased with increasing $CO_2$ concentration from 300 to $800{\mu}mol{\cdot}mol^{-1}$ in sunny day, whereas it didn't increase in cloudy day regardless of $CO_2$ enrichment.

• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.225-230
• /
• 2006

Tomatoes were experimented in perlite bags for various irrigation control methods to elucidate the efficient method for nutrient solution management. The irrigation control methods were for 3 different types such as control by drainage level sensor (PROBE), control by integrated solar radiation (ISR), and control by time clock (Timer). The substrate weight was maintained stably in the proper range in PROBE treatment, regardless of daily solar radiations or growth stages. The bed weights in the treatments of ISR and Timer were changed largely. Growth as well as total yield was the highest in PROBE treatment. There was no difference in soluble solids (Brix %) among the treatments. Consequently, ISR control could be useful only with appropriate timer control and also calibration. Control by drainage level sensor was suggested to be the most satisfactory as irrigation management method.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.243-251
• /
• 2015

This study aimed to determine the effects of root zone cooling using air duct on air temperature distribution and root zone and leaf temperatures of sweet pepper (Capsicum annum L. 'Veyron') grown on coir substrate hydroponic system in a greenhouse. When the air duct was laid at the passage adjacent the slab, the direction of air blowing was upstream at $45^{\circ}$. The cooling temperature was set at $20^{\circ}C$ for day and $18^{\circ}C$ for night. For cooing timing treatments, the cooling air was applied at all day (All-day), only night time (5 p.m. to 1 a.m.; Night), or no cooling (Control). The air temperature inside the greenhouse at a height of 40 and 80cm above the floor, and substrate and leaf temperatures, fruit characteristics, and fruit ratio were measured. Under the All-day treatment, the air temperature was decreased about $4.4{\sim}5.1^{\circ}C$ at the height of 40cm and $2.1{\sim}3.1^{\circ}C$ at the height of 80cm. Under the Night treatment, the air temperature was decreased about $3.4{\sim}3.8^{\circ}C$ at the height of 40cm and $2.2{\sim}2.7^{\circ}C$ at the height of 80cm. The daily average temperature in the substrate was in the order of the Control ($27.7^{\circ}C$) > Night ($24.1^{\circ}C$) > All-day ($22.8^{\circ}C$) treatment. Cooling the passage with either upstream blowing at $45^{\circ}$ or horizontal blowing at $180^{\circ}$ was effective in lowering the air temperature at a height of 50cm; however, no difference at a height of 100cm. Cooling the passage with perpendicular direction at $90^{\circ}$ was effective in lowering the air temperature at the height between 100 and 200cm above the floor; however, no effect on the temperature at the height of 50cm. A greater decrease in leaf temperature was found at 7 p.m. than that at 9. a.m. under both All-day and Night treatments. Fresh weight partitioning of fruit was in the order of the All-day (48.6%) > Night (45.6%) > Control (24.4%) treatment. A higher fruit production was observed under the All-day treatment, in which the accumulated average temperature was the lowest, and it may have been led to a higher proportion of photosynthate distributed to fruit than other treatments.