• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3371-3376
• /
• 2007

The design of a ground-source heat pump system includes specifications for a ground loop heat exchanger where the heat transfer rate depends on the thermal conductivity of the ground. To evaluate this heat transfer property, in-situ thermal response tests on four vertical test boreholes with different grouting materials were conducted by adding a monitored amount of heat to water over various test lengths. By measuring the water temperatures entering and exiting the loop, water flow rate, and heat load, effective thermal conductivity values of the ground were determined. The effect of increasing thermal conductivity of grouting materials from 0.82 to 1.05 W/m$^{\circ}C$ resulted in overall increases in effective ground thermal conductivity by 25.8% to 69.5%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.47-50
• /
• 2002

The displacemant current measuring system used for detecting the dynamic behavior of monolayers at the air-water interface is described. It basically consists of a film balance, a pair of electrodes connected to each other through a sensitive ammeter. Here, one electrode is suspended in air and the other electrode is placed in the water. With Maxwell-displacement-current-measuring method, the phase transitons of $Poly-{\gamma}-benzyl_{L}$ -glutamate (PBLG) and $Poly-{\gamma}-benzyl_{D}$-glutamate(PBDG) on a water surface were detected. Measured surface pressure, displacement current and dipole moment of monolayers of PBLG and PBDG on the water surface. Also, we measured that compression velocity (30, 40, 50[mm/min]) when the sample spread volume was about 370[ul]-400[ul] and displacement current that occur when differed temperature. From the result, it is known that current is generated in the range of high surface pressures as compression velocity become faster and increase of temperature.

• Journal of the Society of Disaster Information
• /
• v.12 no.1
• /
• pp.62-68
• /
• 2016

In this study, the impact problems are brought up and the formulation by isoparametric element is attempted for the purpose of analyzing the response characteristics of laminated plate receiving impact load based on the first-order shear deformation theory expanded from the Mindlin plate theory. The result of static analysis and dynamic analysis is drawn through the numerical analysis rectangular and circular plates of antisymmetric Angle-Ply laminated plate using the finite element method and the analysis on each displacement is compared.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.74-74
• /
• 2003

적외선 감지기는 냉장고, 에어컨, 자동차용 전자부품 등의 온도측정 및 제어, 과잉 전류의 억제를 위한 소자로 널리 사용되며, 또한 최근에는 온도보상형 수정발진기(TCXO) 또는 RF모듈, 액정 판넬의 온도보상회로 등 정보통신기기의 신뢰성 향상을 위해 그 수요가 날로 증가하고 있다. 현재 상용되는 적외선 감지기의 대부분은 벌크형 또는 후막형으로 제조되고 있으나, 최근 반도체공정 기술의 발달로 인하여 보다 향상된 특성이 요구됨에 따라 박막형 등 새로운 형태의 적외선 감지기 대해 활발한 연구가 이루어지고 있다. 본 연구에서는 열 질량과 전도에 의한 열손실을 최소화하여 소자의 감도 및 응답 특성을 향상시키기 위하여 SiO$_2$Si$_3$N$_4$/SiO$_2$ (ONO)다중층 위에 소자 감지부를 형성하고 bulk-micromachining기술을 이용하여 멤브레인 구조를 갖는 박막형 적외선 감지기를 제작하였다.

• 기계와재료
• /
• v.23 no.2
• /
• pp.48-53
• /
• 2011

나노 기술을 바이오 분야에 접목하면 기존의 샘플 재취 및 분석시간, 분석 환경 등의 한계를 극복하여 현장진단, 실시간 진단 등이 가능한 고기능 바이오센서 개발이 가능해진다. 나노와이어 기반 바이오센서는 합성과정에서 전자 특성을 쉽게 제어할 수 있고, 용액내에서 바이오 및 화학물질을 감지하는 성능이 탁월하여 빠른 응답시간, 고감도, 고선택성 등의 동작특성이 향상될 수 있고, 집적화된 센서소자구현이 가능하다. 나노 바이오센서는 의료 분야뿐만 아니라 환경, 시설유지, 에너지관리, 공업프로세스 등 다양한 응용분야를 가지고 있다, 본 논문에서는 여러 나노 구조체 중에서도 전기화학 증착방법을 이용한 나노와이어의 기술적 특징과 합성방법, 전기적 센싱 시스템에 대해서 알아보고, 앞으로 개선되어야 할 사항들에 대해서 살펴보았다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.303-306
• /
• 2014

In this paper, by using a dual frequency liquid crystal material, we propose a liquid crystal device with a fast response characteristics. The dual frequency liquid crystal material has a positive dielectric anisotropy value at a low frequency. With a high frequency, the dielectric anisotropy becomes negative. Therefore, the relaxation process is governed by not only the elastic deformation, but also the dielectric interaction. The measured decay time and rise time were 0.88 ms and 0.33 ms, respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.583-592
• /
• 2010

Equations of motion of thin-walled composite H-type cross-section beams exposed to concentrated harmonic and non-harmonic time-dependent external excitations, incorporating a number of nonclassical effects of transverse shear, primary and secondary warping, and anisotropy of constituent materials are derived. The forced vibration response characteristics of a composite H-type cross-section beam exhibiting the circumferentially asymmetric stiffness(CAS) configuration are exploited in connection with the structural bending-torsion coupling resulting from directional properties of fiber reinforced composite materials.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2005

Electrorheological (ER) fluids, typically composed of particles having higher dielectric constant or electric conductivity than that of suspending fluids with a low viscosity, undergo dramatic, reversible changes when exposed to an external electric field. Among various electroactive materials, we put our efforts on inorganic materials including zeolite, MCM-41, MCM-41/polyaniline composite and SBA-15/polyaniline composites. Their preparation and ER characteristics are introduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.65-68
• /
• 1998

The mechanism of response time and viewing angle in in-plane switching ( IPS ) liquid crystal display ( LCD ) were investigated. The response time of photo-aligned IPS-LCD is fast compared with rubbing-aligned IPS-LCD on polyimide ( PI ) surface. The decay time $\tau$$\_$d/ is decreased with increasing the azimuthal anchoring energy A $\psi$ due to the steric interaction between the LC molecules and side chain of polymer. The viewing angle of IPS-LCD is increased by using photo-depolymerizatin method ; about ${\pm}$70$^{\circ}$at all direction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.205-208
• /
• 1995

PZT powders were prepared by the molten salt synthesis method. The porous PZT specimens were prepared from a mixture of PZT and Polyvinylalcohol(PVA) powders by BURPS(Burnout Plastic Sphere) technique. The pulse-echo response of PZT-polymer 3-3 type composite transducer with various PVA wt.% were studied, The fall time of pulse-echo response of PZT-polymer 3-3 type composite transducer was shorten to that of solid PZT-maded transducer. Therefore, a good transmitting and receiving properties could be obtained. The distance between transducer and reflector was in good agreement both solid PZT and PZT-polymer 3-3 type composite fabricated transducer.