• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.1
• /
• pp.25-28
• /
• 2004

To determine lethal temperature of orchardgrass (Dactylis glomerata L. cv. Janbeol 102) developed in Korea at heat-stressed conditions, seedlings grown in a amall pots for 4 weeks were treated at $45^{\circ}C$, $50^{\circ}C$ or $55^{\circ}C$ for 1 h. Heat treatments at $60^{\circ}C$ and $65^{\circ}C$ for 1 h, several plants were withered and showed damage symptom on their leaves. When the plants were exposed to $70^{\circ}C$ for 1 h, most of leaves were severely withered, but it was not lethal conditions for the whole plants. By contrast, most of plants were died within one day after heat treatment at $80^{\circ}C$ for 1h. Furthermore, plants exposed to $80^{\circ}C$ for 55 min were also died within 7 days. It was found that new shoots were regenerated from the plants that had been treated at $80^{\circ}C$ within 50 min. These results indicate that heat treatment at $80^{\circ}C$ for 55 min is an optimum condition to distinguish the lethality of orchardgrass plants. Simple viability assay system established in this study will be useful for selection and characterization of heat-tolerant transgenic orchardgrass plants.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.238-241
• /
• 2008

Astragalus membranaceus have used as a medicinal herb and food in Korea. It is limited its harvest by diseases, pests and climate, therefore the main objective of Astragalus membranaceus breeding is the development of varities with the resistance for them. We used mutation breeding to obtain the genetic resources with the resistance for them. Pocheon, the local variety of Astragalus membranaceus, was treated with different levels Y-ray of $100{\sim}600$ Gy. There were investigated the sensitivity on germination and survival rate, plant height and the other characters. Germination rate from 4th day after sowing was significantly decreased above the 300 Gy as compared to the control. Compared to control, the decrements of survival rate were 32, 43, 63, 72, 84 and 89% for 100, 200, 300, 400, 500 and 600 Gy, respectively. The sensitive characters to Y-ray were plant height, number of branches per plant and survival rate, and the insensitive characters were number of leaves, length of leaf, and width of leaf. Plant height, number of branches per plant and survival rate seemed to be appropriate characters to decide the radiosensitivity, and radiation doses of $200{\sim}300$ Gy ($LD_{50}$) were recommend for mutation breeding.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.7
• /
• pp.5-16
• /
• 2017

Soil nailing is the most general method to reinforce the slope by taking pullout and shear resistance force of the nail for stabilizing the slope. Domestic soil nailing design method considers only pullout resistance and does not consider the shear resistance sufficiently. In case of nail, the effect of tensile stress is dominant, but it is desirable to design by considering shear stress as well as tensile stress in case of slope where circle failures occur. Recently, studies on the shear resistance effect of nails have been carried out in the geotechnical field. However, many researches on the shear reinforcement effect of soil nailing have not been conducted until now. Most of the studies are about increasing pullout resistance by improving material, shape and construction method of nail. Therefore, it is necessary to the study on shear resistance of soil nailing and development of new methods to increase the shear force. In this study, large shear test and limit equilibrium analysis have been performed for a new soil nailing method to increase the shear resistance by forming protrusions through pressurized grouting after installing a packer on the outside of deformed bar. The study results showed that shear resistance of protrusion type soil nailing increased compared to soil nailing and it is more effective when applied to the ground with large strength parameters.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.595-602
• /
• 2005

The purpose of this study is to utilize recycled concrete aggregates as permeable pavement materials. This study evaluates mechanical properties and durability of porous concrete depending on mixing rates of recycled aggregates and polyme. As a result, void ratio and permeability coefficient of porous concrete for pavement increased a little as mixing rate of recycled aggregates increased. Void ratio and permeability coefficient increased a lot as mixing rate of polymer increased. As polymer was mixed $20\%$, national regulation of permeable concrete for pavement($8\%$ and 0.01cm/sec) was met. Compressive strength and flexural strength decreased as mixing rate of recycled aggregates increased but they increased a lot as mixing rate of polymer increased. Even when recycled aggregates were mixed $75\%\;with\;10\%$ polymer mixed, national regulation of pavement concrete(18MPa and 4.5MPa) was met. In addition, regarding sliding resistance, BPN increased as mixing rate of recycled aggregates increased. But BPN decreased as polymer was mixed. Compared to crushed stone aggregates, abrasion resistance and freeze-thaw resistance decreased as mixing rate of recycled aggregates Increased. When polymer was mixed, abrasion resistance and freeze-thaw resistance improved remarkably. Compared to non-mixture, $10\%$ mixture of polymer improved abrasion resistance and freeze-thaw resistance about $8.6\%$ and 3.8times respectively.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.407-415
• /
• 2013

The purpose of this research is to verify the performance of hardening accelerator in cement paste through mechanical performance evaluation and micro structure analysis on hardening accelerator for development of super high early strength concrete. The research results showed that hardening accelerator produced $Ca(OH)_2$ when hydrated with cement, enhancing the degree of saturation of Ca ion by using differential thermal analysis. Moreover, porosity was reduced rapidly as capillary pores were filled by hydration products of $C_3S$. According to the experiment using hydration measurement testing, when 1% and 3% of accelerator were mixed, hydration rate increased toward the second peak point compared to high early strength cement, before the first peak point disappeared. It turned out that adding accelerator accelerated the hydration rate of cement, especially $C_3S$. The shape of C-S-H is shown depending on the amounts of accelerator added and the production and age of $Ca(OH)_2$ by using SEM to observes hydration products. Therefore, it's evident that hardening accelerator used in this research increases amounts of $Ca(OH)_2$ and accelerates $C_3S$, it is effective for the strength development on early age.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.145-151
• /
• 2016

In response to the cavitation caused by the partial vacuum caused by the fluid flow, a paint was developed by dispersing the lamella-shaped glass-flake in resin for anti-cavitation. This composite paint was developed by using the inorganic filler (lamella shaped glass-flake) and the NBR (Acrylonitrile-butadiene rubber) which was modified epoxy resin. Especially, the glass-flake was a thin film with a thickness of about 100~200 nm and length of about $20{\sim}30{\mu}m$, the aspect ratio was about 200 to 300 times that of the plate-shaped. So the paint for anti-cavitation have shown excellent performance in corrosion resistance. The results of evaluating anti-cavitation performance was below, tensile strength $4.8{\sim}6N/mm^2$ or more, rupture elongation 30% or higher, abrasive speed $10mm^2/h$ or less. In particular, it showed more than twice the superior performance compared to existing advanced foreign products in anti-cavitation performance evaluation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.404-410
• /
• 1989

Friction and wear tests were conducted with several different ceramics sliding against ceramic and metal couples with and without lubricant in a two disk type sliding machine. The purpose was to know the tribological properties of ceramics. With very different physical and chemical properties of ceramics compared to metal, the tribological properties of ceramics should be defined in detail. Among them, the wear and friction with same or different couple is very important. Also the lubrication of ceramic is one of the major area to be studied. From this research, SiC, SI$_{3}$N$_{4}$ and ZrO$_{2}$ were slid against SiC, AISI 4340 and bronze under various sliding condition. It was found that the friction and wear of ceramics are strongly dependent on the sliding condition. For unlubricated sliding against SiC, ZrO$_{2}$ shows low wear and friction coefficient over wide lange of load, but with lubricated sliding, SiC shows better performance whatever lubricants were used. Also the effect of lubricant depended upon the material properties of sliding pairs. The general tribological properties of ceramics were not correlated with chattering and noise at low load but it could be reduced or avoided effectively by using lubricants. SiC and Si$_{3}$N$_{4}$ slid against SiC have transition from mild to severe wear at high load but ZrO$_{2}$-SiC and SiC-steel have not. Wear debris formed on the contact area of SiC couples was main cause of the initiation of transition. At high speed, only ZrO$_{2}$ sliding against SiC has transition of wear by low thermal conductivity.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.293-296
• /
• 2008

This study was carried to select artichoke (Cynara scolymus L.) varieties that can be cultivated in non-heated greenhouse during winter in Jeju Island in Korea. Artichoke varieties namely, 'Purple Romagna' (Neseed Co.), 'Imperial Star' (Keithley Williams Seed Co.), 'Green Globe' (Park Seed Co.), 'Emerald' (Ferry-morse Seed Co.), 'Italian' (Unknown), and 'Carciofo Di Romagna' (Lortolano), were raised in a plug tray with 72 cells for two months and transplanted in a non-heated greenhouse on October 5, 2004. The first harvesting of 'Emerald' and 'Imperial Star' were the earliest and April 26 and 27, 2005 respectively. Most of the varieties were harvested from early May to June 2005. The number of head per plant was the highest in 'Green Globe' with more than five heads and the lowest were recorded in 'Italian' with one head or less. The weight of heads per plant was more than 228 g in 'Purple Romagna', 'Imperial Star' and 'Green Globe'. The highest yield was in 'Green Globe' with 2,172 kg/10a, followed by 'Imperial Star' with 1,947 kg/10a. Accordingly, it is considered that 'Green Globe' and 'Imperial Star' are adequate for the high-yield cultivation in non-heated greenhouse in Jeju Island. They can be harvested from the April to June when cultivated from the early October of the previous year.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.130-154
• /
• 2015

The purpose of this study was to analyze the mechanical and metallurgical education (MME) teachers' job using the Developing a Curriculum (DACUM) methodology. To accomplish the purpose of this study, an MME teachers' job/occupational analysis was conducted in the following steps: "Planning the DACUM workshop," "Recruiting/Constructing the DACUM committee members," "Providing the DACUM orientation," "Holding the DACUM workshop," "Verifying the DACUM result," and "Refining the DACUM chart based on verification data." The DACUM job/occupational analysis was conducted by fifteen DACUM committee members in the DACUM workshop in January, 2015; moreover, the DACUM chart of the MME teachers was verified by the group of subject matter experts. The major findings of the study were as follows. First, this study defined the MME teachers who taught mechanical and metallurgical-related subjects to students with the secondary education teacher certification and performed work related to character education, career guidance, life guidance, and others in a specialized high school, the Meister high school. Second, this study determined 16 duties and 199 tasks for fulfilling the MME teachers' job; moreover, the study extracted the importance, difficulty, and frequency of each task and demand for the entry-level workforce. Third, this study provides the DACUM research chart based on the job/occupational analysis results of the MME teachers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7754-7760
• /
• 2015

The outer tie rod is one of the part of steering system, the optimization process was executed to find the lightweight design. The inner tie rod was considered in the optimum design of an outer tie rod. it could be closer to the test condition than in the case of considering outer tie rod only. The aluminum forging material was considered as a weight reduction proposal. The target of optimization was the shape of the minimum weight to resist at the load of buckling. RSM and Kriging interpolation method were applied as a optimization method to consider the nonlinear shape optimization problem. Then, 16.3%, 16.6% of weight reduction was obtained from the result comparing with that of the initial model. The results of meta model optimization was compared with that of finite element method. The error values of buckling load estimation were 2.6%, 2.04%. and those of weight estimation were 0.17%, 0.13%. Therefore, it seemed that the result of Kriging model could be obtained closer to optimum value than that of RSM model.