• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.77-84
• /
• 2006

This study was conducted to find a system for screening organic resources with 16 species, 62 samples which were selected to randomizing point from city, province and industrial areas in the whole country. Content of organic matters were $65.3%{\sim}98.0%$ in all samples so that they were largely over than 60%, raw material regulation of compost. Concentrations of total nitrogen and total phosphorus were $0.7{\sim}4.8%\;and\;0.8{\sim}5.0$, they could look for effect of the nitrogen and phosphorus supply as a raw material of compost. In case of 8 elements concentrations of heavy metal, they were too high to use as raw materials of compost which were over to regulation limit in Cu, Cr, Ni, and As from fiber industry, Ni from food company and leather industry, and the others are adapt to limit levels. HEM contents fro the highest to $113mg\;kg^{-1}$ from liber industry and PAHs content were the highest to $3,462ug\;kg^{-1}$ from paper-mill manufacture. Distribution of PAHs concentiations were naphthalene>phenanthrene>pyrene>fluoroanthene>acenaphthene. $Microtox{(R)}\;EC_{50}$ values for bioassay were pharmaceutical company>paper-mill manufacture>industrial area sewage sludge>fiber industry>urban sewage sludge>metropolitan sewage sludge. HEM between Zn, Cu, and Ni was significant at the 99% and between Cd was significant at the 95%, Microtox between Hg and BEM significant at the 95%.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.250-259
• /
• 2018

We investigated the petrological features of the stone materials used in the Jeolla Usuyeong rampart and estimated their provenance through the geological survey. The Jeolla Usuyeong was designated as a historic site (No. 535) on 2016. Since the remaining rampart is less than 15%, it is necessary to make conservation on it. In this study, we discriminated the stone materials used for the rampart according to their petrographic characteristics and estimated the volume proportion of each stone by the rock type. Also, we measured the whole-rock magnetic susceptibility. The petrographic features of the stones in the rampart were compared with those in the vicinity by their mineral composition and texture. The stone materials of the rampart mainly consist of the tuff, lapilli tuff, and lapilli stone. Among these three kinds of rocks, lapilli tuff is quantitatively the most abundant (60.3%), the next is tuff (34.7%), and lapilli stone (2.5%) shows the least amount. The whole-rock magnetic susceptibility of the tuffaceous rocks can be divided by the value of $1.0{\times}10^{-3}$ SI unit. Also, the compressive strength of tuff exhibits about 156 MPa, which is adequate to reuse for the repairing work. Petrological comparisons between stone materials and outcrop rocks distributed around the Hwawon peninsula leads to a conclusion that the stone materials of the rampart are likely to have been delivered from the Dongoeri and Sindeok-ri. Judging from the results of the comparison on the frequency of use and physical properties among the tuffaceous rocks, tuff is considered to suitable for restoring the rampart.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.307-316
• /
• 2007

Yellow poplar (Liriodendron tulipifera L.) has low germination rate relatively other species, so the seedling production of Yellow poplar is a hard task. Accordingly this study was conducted to determine the optimal germination conditions for healthy seedling production and to promote survival rate after afforestation. Gemination percentage was examined at different media and seed covering materials using planting flats in the greenhouse. The best germination percentage was observed in sand for media and compound soil for covering materials. But it was time to transplant, seedlings became a poor character (i.e. height, root length, number of root, dry weight) in sand for media. In order to produce healthy seedlings, each different medium was compounded with TKS-2 (this is a gardening bed soil.) in the ratio 1:1 (v/v.), and compared two conditions. Quality of seedling was better than not mixed TKS-2 into each medium. Transplanting seedlings from greenhouse to nursery grew up rapidly 2 months later (early in August~early in October). Growth amount during two months corresponded to 85.6% and 71.3% in total growth amount of height and diameter at root collar, respectively. In the case of the competition-density effect on yellow-poplar seedlings, direct seedling produced the maximum 35 standard seedlings above 8 mm of root collar diameter per $m^2$, while transplanting seedling produced the maximum 64 standard seedlings per $m^2$. And produced seedlings of two way were significantly different rootlet while axial root and lateral root was not significantly different.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.217-225
• /
• 2002

When we use the flowable resin on the primary molars for quick handling, one of the most important property is the wear resistance. This study was performed to compare the wear resistance characteristics of four flowable composite resins [Arabesk flow (group 1), Tetric flow (group 2), Aeliteflow (group 3), Filtek flow (group 4)] to that of one control composite resin [Z100 (group 5)]. Specimen discs(n=10), 10mm wide and 2mm thick, were stored in distilled water at $37^{\circ}C$ for 7 days prior to testing. The specimens were subjected to 50,000 strokes at 2 Hz on the MTS system. During the test, the following parameters were maintained: the lateral excursion at 0.4mm, occlusal force at 2-100N with a force profile in the form of a half sine wave. The measurements of volume loss, depth of wear, and Vicker's hardness number of composite resins, and SEM observations of the polished and abraded surfaces were established. One-way ANOVA and Scheffe's multiple comparison test were employed to detect statistically significant differences among the flowable composite resin groups and the control composite group at P<.05. The following results were obtained: 1. Group 3 showed the least volume loss, while group 4 showed the greatest. The mean volume loss increased in the following order: group 3

• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.63-71
• /
• 2009

Two experiments were conducted to investigate feed value of Yukmijihwangtang (herbal medicine) meal. In experiment 1, the chemical composition of Yukmijihwangtang ingredients was determined before and after extraction, and investigated the effects of partial substitution of dried Yukmijihwangtang meal on TMR for fattening cattle. In experiment 2, nine Korean native male goats were employed to investigate the palatability and ruminal parameters of Yukmijihwangtang meal silages. In experiment 1, the crude protein content after water extraction was higher in Alisma orientale Juzepczuk (Teaksa), and lower in Pachyma hoelen Rumph (Bokryeong). the crude fat content after water extraction was higher in Cornus officinalis Sieb. et Zucc (Sansuyu), and lower in other ingredients. ADF content after water extraction of Cornus officinalis Sieb. et Zucc (Sansuyu) was higher compared to those of Pachyma hoelen Rumph (Bokryeong) and Paeonia suffruticosa Andrews (Mokdanpi). Dioscorea japonica Thunberg (Sanyak) was the lowest in ADF content. Dry matter disappearance was increased by adding Yukmijihwangtang meal to TMR. In experiment 2, feed intakes of Yukmijihwangtang silage containing molasses (0.5 and 1%) for 30 min and 6 hr were significantly higher than that of control (0%) in Korean native goats. In various ruminl parameters, molasses addition to silage materials trended to increase total VFA, propionate and valerate contents, but trended to decrease iso-butylate, butylate and iso-valerate contents in Korean native goats. In conclusion, Yukmijihwangtang meal could be used as partial substitution of low level in TMR for fattening cattle. Molasses supplementation to silage materials contained with herbal medicine meal could improve its nutritional quality and palatability for Korean native goats. One percent level of molasses addition could give a useful effect in ensiling.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.164-173
• /
• 2009

Purpose: The purpose of this study was to evaluate the effect of abutment material on screw-loosening before and after cyclic loading. Among the different materials of abutments, zirconia and metal abutment were used. Material and methods: Two types of implant systems: external butt joint(US II, Osstem Implant, Korea) and internal conical joint(GS II, Osstem Implant, Korea) were used. In each type, specimens were divided into two different kinds of abutments: zirconia and metal(n=5). The implant was rigidly held in a special holding to device ensure fixation. Abutment was connected to 30 Ncm with digital torque gauge, and was retightened in 30 Ncm after 10 minutes. The initial removal torque values were measured. The same specimens were tightened in 30 Ncm again and held in the cycling loading simulator(Instron, USA) according to ISO/FPIS 1480. Cycling loading tests were performed at loads 10 to 250 N, for 1 million cycles, at 14 Hz,(by subjecting sinusoidal wave from 10 to 250 N at a frequency of 14 Hz for 1 million cycles,) and then postload removal torque values were evaluated. Results: 1. In all samples, the removal values of abutment screw were lower than tightening torque values(30 Ncm), but the phenomenon of the screw loosening was not observed. 2. In both of the implant systems, initial and postload removal torque of zirconia abutment were significantly higher than those of metal abutment(P<.05). 3. In both of the implant systems, the difference in removal torque ratio between zirconia abutment and metal abutment was not significant(P>.05). 4. In metal abutments, the removal torque ratio of GS II system(internal conical joint system) was lower than that of US II system(external butt joint system)(P<.05). 5. In zirconia abutments, the difference in removal torque ratio between the two implant systems was not significant(P>.05). Conclusion: Zirconia abutment had a good screw joint stability in the condition of one million cycling loading.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.590-596
• /
• 2002

The domestic grape, cultivar Campbell's Early, was investigated for suitability for production of red wine. The factors for red wine fermentation and quality such as concentrations of sugar, acidity and organic acids in the fresh fruit and the wine from the grape were analyzed. The average concentration of sugar in the fruit was 14%. Since the concentration was not sufficient for fermentation, sugar was added up to 23%. It resulted in production of wine with 12% of alcohol. The total acidity and pH of the fruit were 0.8% and pH 3.4 respectively. Those were optimum levels for fermentation. The fruit contained 3,649 ppm of tartaric acid, 5,339 ppm of malic acid and 948 ppm of citric acid. The wines from Icheon and Youngdong, which were fermented from the grape and M wine which was an imported red wine, were tested. Their pH were 3.5, 3.4 and 3.7, and total acidities were 0.75%, 0.71% and 0.57%, respectively. They contained 1,881 ppm, 2,098 ppm and 8,534 ppm of tartaric acid, 3,033 ppm, 1,952 ppm and undetectable amount of malic acid, 769 ppm, 389 ppm and undetectable amount of citric acid, and 3,337 ppm, 2,368 ppm and 11,991 ppm of lactic acid. This results indicated that M wine contained much more amounts of tartaric acid and lactic acid than the wines of Icheon and Youngdong. The sensory analysis showed that Korean students preferred Youngdong and Icheon wine to M wine. The analytic results indicated that the domestic grape, cultivar Campbell's Early, is suitable source for high quality red wine.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.108-117
• /
• 2005

Pharmaceutical byproduct sludge and cosmetic industry wastewater sludge can be used as a raw material of compost. Effects of three types of pharmaceutical byproduct sludge and one type of cosmetic industry wastewater sludge on soil properties and red pepper growth were investigated in a field based concrete pot ($2{\times}2m$). These sludges and pig manure ($5Mg\;ha^{-1}$, dry basis) were incorporated into the upper of loam soil 30 days prior to transplanting red pepper. Changes in soil properties and contents of heavy metals and toxic organic compounds in soil and plant were measured. And also plant growth measurement and bioassay of soil phytotoxicity were included. Contents of heavy metals were increased in the soils treated with the sludges. Plant growth in the sludge treatments were mostly inferior to that of NPK treatment, especially in early stage. Content of N in plant was lower in all sludge treatments at early and middle growth stages, and it was especially caused by characteristics and concentration of nitrogen and organic matter of sludges. Total yield of red pepper was highest in the NPK treatment and followed by pharmaceutical sludge 3, pig manure, pharmaceutical sludge 1, and pharmaceutical sludge 2, and the yield of cosmetic sludge treatment was considerably lower than others. HEM and PAHs contents in soil of cosmetic sludge treatment were $4.80mg\;kg^{-1}$ and $2,263.2{\mu}g\;kg^{-1}$, respectively. Root elongation of lettuce exposed to the water extract of soil treated with cosmetic sludge was about 20% of that found in the test with soil extract of non fertilization treatment. At present, raw materials of compost were authorized according to the contents of organic matter, heavy metals and product processing. Toxic organic compounds analysis and bioassay would be helpful for authorization and assessment of suitability of raw materials of compost.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.1
• /
• pp.85-94
• /
• 2007

To determine the influence of food waste compost (FWC) application on paddy soil, FWC was applied to the paddy soil and then compared with farmer's practice as to the effects on rice and soil environment. Initially, pig manure compost (PMC) had high content of phosphorus ($15g\;kg^{-1}$) and potassium ($23g\;kg^{-1}$), while FWC had high content of total nitrogen ($13g\;kg^{-1}$) and salinity ($18.5g\;kg^{-1}$). Comparison was also made between chemical fertilizer and FWC use as a trial in the paddy field under the clay loam and sandy loam soil. In the panicle formation stage, chemical fertilizer application was proper in clay loam while PMC application was proper in sandy loam. However, chemical fertilizer produced higher yield compared to compost treatment, both on clay loam and sandy loam with 20~25% and 17~19%, respectively. The lower yield in sandy loam maybe due to slow mineralization of compost such that the crop did not effectively use it. Organic matter content in paddy soil after experiment was higher in FWC and PMC plots compared to that in chemical fertilizer plots. But the other soil properties were comparable. Therefore, the FWC compost had little effect on soil when it use as a trial in paddy field. Likewise, after the application of FWC as a trial, analysis of nitrate nitrogen and ammonium nitrogen in the surface water and 60 cm depth of paddy soil water nine days after planting was done. Results revealed that concentration of ammonium nitrogen was similar to irrigation water while nitrate nitrogen concentration was not detected, and hence did not contribute to water pollution. It is concluded that the application of FWC in the paddy field had not affected on environmental pollution in the paddy field. But its use as compost during rice culture reduced yield quantity. Such study should include selection of compost material, amount and method of compost application.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.20-28
• /
• 2013

The purpose of this study was to compare the ultra-violet(UV) radiation under the landscaping shade facilities and tree with natural solar UV of the outdoor space at summer middays. The UVA+B and UVB were recorded every minute from the $20^{th}$ of June to the $26^{th}$ of September 2012 at a height of 1.1m above in the four different shading conditions, with fours same measuring system consisting of two couple of analog UVA+B sensor(220~370nm, Genicom's GUVA-T21GH) and UVB sensor(220~320nm, Genicom's GUVA-T21GH) and data acquisition systems(Comfile Tech.'s Moacon). Four different shading conditions were under an wooden shelter($W4.2m{\times}L4.2m{\times}H2.5m$), a polyester membrane structure ($W4.9m{\times}L4.9m{\times}H2.6m$), a Salix koreensis($H11{\times}B30$), and a brick-paved plot without any shading material. Based on the 648 records of 17 sunny days, the time serial difference of natural solar UVA+B and UVB for midday periods were analysed and compared, and statistical analysis about the difference between the four shading conditions was done based on the 2,052 records of daytime period from 10 A.M. to 4 P.M.. The major findings were as follows; 1. The average UVA+B under the wooden shelter, the membrane and the tree were $39{\mu}W/cm^2$(3.4%), $74{\mu}W/cm^2$(6.4%), $87{\mu}W/cm^2$(7.6%) respectively, while the solar UVA+B was $1.148{\mu}W/cm^2$. Which means those facilities and tree screened at least 93% of solar UV+B. 2. The average UVB under the wooden shelter, the membrane and the tree were $12{\mu}W/cm^2$(5.8%), $26{\mu}W/cm^2$(13%), $17{\mu}W/cm^2$(8.2%) respectively, while the solar UVB was $207{\mu}W/cm^2$. The membrane showed the highest level and the wooden shelter lowest. 3. According to the results of time serial analysis, the difference between the three shaded conditions around noon was very small, but the differences of early morning and late afternoon were apparently big. Which seems caused by the matter of the formal and structural characteristics of the shading facilities and tree, not by the shading materials itself. In summary, the performance of the four landscaping shade facilities and tree were very good at screening the solar UV at outdoor of summer middays, but poor at screening the lateral UV during early morning and late afternoon. Therefore, it can be apparently said that the more delicate design of shading facilities and big tree or forest to block the additional lateral UV, the more effective in conditioning the outdoor space reducing the useless or even harmful radiation for human activities.