• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.206-211
• /
• 2018

Purpose: Recently, a method of forming a slot in the prosthesis lingual has been introduced to solve the occlusal and aesthetic disadvantages of screw-retained prosthesis in the manufacture of implant-fixed prosthesis and to ensure retrievability in cement retained prostheses. The purpose of this study is to investigate the effect of the internal gap on the removal of the prosthesis in the preparation of cement-retained implant prostheses with lingual slots. Materials and methods: Titanium abutment and internal gap of the zirconia prosthesis to be attached to the upper part were set to 30, 35, and $50{\mu}m$, respectively. Three for each type total 15 were produced for each type. The zirconia prosthesis formed a retrievable cement-type slot with a space of 1 mm at the location where the titanium abutment meets the shelf area. Autocatalytic resin cement was used for bonding of abutment and zirconia prosthesis, and the maximum removal stress value was measured in units of Ncm by using the customized equipment of the cemented specimen. The Kruskal-Wallis test was used to compare the three groups by statistical analysis (${\alpha}=.05$), modified by post hoc test the Mann-Whitney U-test and the Bonferroni correction method were used to compare the two methods (${\alpha}=.017$). Results: There was no statistically significant difference in removal stress between the $30{\mu}m$ group and the $35{\mu}m$ group in the internal gap (P = .032), and there was a significant difference between the $30{\mu}m$ group and the $50{\mu}m$ group, between the $35{\mu}m$ group and the $50{\mu}m$ group (P < .017). Conclusion: Thus, the internal gap of computer-aided design affected the retention between the zirconia prosthesis and the titanium abutment.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.579-589
• /
• 2009

Hwang River in South Korea, has experienced channel adjustments due to dam construction. Hapcheon main dam and re-regulation dam. The reach below the re-regulation dam (45 km long) changed in flow regime, channel width, bed material distribution, vegetation expansion, and island formation after dam construction. The re-regulation dam dramatically reduced annual peak flow from 654.7 $m^3$/s to 126.3 $m^3$/s and trapped the annual 591 thousand $m^3$ of sediment load formerly delivered from the upper watershed since the completion of the dam in 1989. An analysis of a time series of aerial photographs taken in 1982, 1993, and 2004 showed that non-vegetated active channel width narrowed an average of 152 m (47% of 1982) and non-vegetated active channel area decreased an average of 6.6 km2 (44% of 1982) between 1982 and 2004, with most narrowing and decreasing occurring after dam construction. The effects of daily pulses of water from peak hydropower generation and sudden sluice gate operations are investigated downstream of Hapcheon Dam in South Korea. The study reach is 45 km long from the Hapcheon re-regulation Dam to the confluence with the Nakdong River. An analysis of a time series of aerial photographs taken in 1982, 1993, and 2004 showed that the non-vegetated active channel width narrowed an average of 152 m (47% reduction since 1982). The non-vegetated active channel area also decreased an average of 6.6 $km^2$ (44% reduction since 1982) between 1982 and 2004, with most changes occurring after dam construction. The average median bed material size increased from 1.07 mm in 1983 to 5.72 mm in 2003, and the bed slope of the reach decreased from 0.000943 in 1983 to 0.000847 in 2003. The riverbed vertical degradation is approximately 2.6 m for a distance of 20 km below the re-regulation dam. It is expected from the result of the unsteady sediment transport numerical model (GSTAR-1D) steady simulations that the thalweg elevation will reach a stable condition around 2020. The model also confirms the theoretical prediction that sediment transport rates from daily pulses and flood peaks are 21 % and 15 % higher than their respective averages.

• Applied Biological Chemistry
• /
• v.14 no.3
• /
• pp.213-220
• /
• 1971

In order to investigate chemical components of edible marine algae in Korea, the present work is carried out with ten edible and two non-edible species of brown algae, collected from Cheju-island during October, 28-30 in 1970. Among the general components, water content is about 14-16% to dry weight and the crude protein about 16%, which are almost similar in content compared with several non-cultivate edible land plants. The content of crude fat is about 0.7-2.0%, and that of crude fiber about 3-8%, while the content of crude ash is 9.17-16.89%. The last one is more than two times in content compared with the land plants. The reducing sugar is about 0.27-2.49% in general. On the other hand, among the minerals Ca content is the most abundant, 1.73-2.51%, and the next is S, 1.0-1.8%. Mg and I are around 0.1-1%, while K and Na are about 1% in content. Among the micro-elements, Fe and Zn are about 0.01-0.03%, and Cu and Mn 0.001-0.005% in content. There is no special significant difference in chemical components between the edible and non-edible species of brown algae. Moreover, so far as the present investigation is concerned, there can be found no significant inter-species relationship on the taxonomical or phylogenetical points of view, considering their components.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.199-204
• /
• 1987

This study was conducted to verify the identity and the effects on soil improvements by the application of Barley stone which has been recently named as miraculous mineral on account of being propagandized as health stone because of several special effect of medicine, the supplement of micronutrients for agriculture, prevention against diseases and insects of plant, and the increase of nutrient holding capacity of soil. The results were summarized as follows; 1. Barley stone is considered as Diabase Porphyrite by the analysis of X-ray Diffraction, chemical composition and microspore's observation. This mineral stone called as Barley stone has been deducted because of being seen as if the feature was attatched with cooked barley and appearently scattered about feldspar's phenocryst on the dark-green stone base. 2. In chemical characteristics of barley stone, the pH 8.7 was higher but C.E.C. 9.0 me/100g was lower then those of other clay minerals such as Bentonite and Zeolite, and so barley stone material was not considered suitable for improvement of sandy loam soil. 3. Effects of Bentonite and Zeolite application on yield of paddy rice were 108-109% compare to non-treated plot, but Barley stone has not increased rice yield. Notwithstanding the increase of application of barely stone to 5 ton per 10a, the yield increase was not significantly showing only 102-103% and the effects of Peanut, hot pepper and chinese cabbage were not recognized either.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.279-284
• /
• 2008

The phase change materials have been extensively used as an optical rewritable data storage media utilizing their phase change properties. Recently, the phase change materials have been spotlighted for the application of non-volatile memory device, such as the phase change random access memory. In this work, we have investigated the crystallization behavior and microstructure analysis of In-Sb-Te (IST) thin films deposited by RF magnetron sputtering. Transmission electron microscopy measurement was carried out after the annealing at $300^{\circ}C$, $350^{\circ}C$, $400^{\circ}C$ and $450^{\circ}C$ for 5 min. It was observed that InSb phases change into $In_3SbTe_2$ phases and InTe phases as the temperature increases. It was found that the thickness of thin films was decreased and the grain size was increased by the bright field transmission electron microscopy (BF TEM) images and the selected area electron diffraction (SAED) patterns. In a high resolution transmission electron microscopy (HRTEM) study, it shows that $350^{\circ}C$-annealed InSb phases have {111} facet because the surface energy of a {111} close-packed plane is the lowest in FCC crystals. When the film was heated up to $400^{\circ}C$, $In_3SbTe_2$ grains have coherent micro-twins with {111} mirror plane, and they are healed annealing at $450^{\circ}C$. From the HRTEM, InTe phase separation was occurred in this stage. It can be found that $In_3SbTe_2$ forms in the crystallization process as composition of the film near stoichiometric composition, while InTe phase separation may take place as the composition deviates from $In_3SbTe_2$.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.158-169
• /
• 2005

This study was done to evaluate the shear bond strength between light-cured glass ionomer cement (GIC) base and resin cement for luting indirect resin inlay and to observe bonding aspects which is produced at the interface between them by SEM. Two types of light cured GIC (Fuji II LC Improved, GC Co. Tokyo, Japan and Vitrebond$^{TM}$, 3M, Paul Minnesota U.S.A) were used in this study. For shear bond test, GIC specimens were made and immersed in 37$^{\circ}C$ distilled water for 1 hour, 24 hours, 1 week and 2 weeks. Eighty resin inlays were prepared with Artglass$^{(R)}$ (Heraeus Kultzer Germany) and luted with Variolink$^{(R)}$ II (Ivoclar Vivadent, Liechtenstein). Shear bond strength of each specimen was measured and fractured surface were examined. Statistical analysis was done with one-way ANOVA. Twenty four extracted human third molars were selected and Class II cavities were prepared and GIC based at axiopulpal lineangle. The specimens were immersed in 37$^{\circ}C$ distilled water for 1 hour, 24 hours, 1 week and 2 weeks. And then the resin inlays were luted to prepared teeth. The specimens were sectioned vertically with low speed saw. The bonding aspect of the specimens were observed by SEM (JSM-5400$^{(R)}$, Jeol, Tokyo, Japan) .There was no significant difference between the shear bond strength according to storage periods of light cured GIC base. And cohesive failure was mostly appeared in GIC On scanning electron micrograph, about 30 - 120 $\mu$m of the gaps were observed on the interface between GIC base and dentin. No gaps were observed on the interface between GTC and resin inlay.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.778-787
• /
• 2016

Fermented vinegars using pear was compared according to the appled side materials. Quality characteristics of three kinds of the fermented vinegars (pear vinegar, PV; pear black rice vinegar, PBV; pear mint vinegar, PMV) were investigated, which includes pH, total acidity, colors, the contents of sugar, amino acids, total polyphenol, and total flavonoid, ${\alpha}^{\prime}{\alpha}-diphenyl-{\beta}-pycrylhydrazyl$ (DPPH) radical scavenging ability, and sensory evaluation. Brown rice vinegar (BRV) was used as a control. The pH and total acidity of the fermented pear vinegars were significantly different showing the range of 3.17~3.43 and 4.01~5.05%, respectively (p<0.05). The sugar contents of PV and PMV were significantly higher than other vinegars (p<0.05). L, a, and b values were the highest in PV, PBV, and PMV, respectively. Among the four vinegars, the essential amino acids were the highest in PV with the order of lysine, isoleucine, valine, and threonine. Besides, the fermented pear vinegars have many non-essential amino acids such as glutamic acid and aspartic acid. The aspartic acid content was the highest in PV while glutamic acid content was the highest in BRV. The total polyphenol content was the highest in PV while total flavonoid content was the highest in PBV. The DPPH radical scavenging ability (%) was the highest in PV. In sensory evaluation, PBV showed the highest color, taste and overall preference scores. These results show that pear would be desirable to prepare high-quality vinegars and functional foods.

• Radiation Oncology Journal
• /
• v.18 no.4
• /
• pp.314-320
• /
• 2000

Purpose :To investigate whether changes in plasma concentrations of transforming growth factor-$\beta$1(TGF-$\beta$1), tumor necrosis factor-alpha (TNF-$\alpha$) and interleukin-6 (IL-6) could be used to identify the development of radiation-induced pneumonitis in the lung cancer patients. Methods and Materials :Seventeen patients with lung cancer (11 NSCLC, 6 SCLC) were enrolled in a prospective study designed to evaluate clinical and molecular biologic correlation of radiation-induced pneumonitis. The study began in May 1998 and completed in July 1999. All patients were treated with radiotherapy with curative intent : 1.8 Gy per day, 5 fractions per week. Serial measurements of plasma TGF-$\beta$1, TNF-$\alpha$ and IL-6 were obtained in all patients before, weekly during radiotherapy and at each follow-up visits after completion of treatment. These measurements were quantified using enzyme linked immunosorbent assay (ELISA). All patients were evaluated for signs and symptoms of pneumonitis at each follow-up visit after completion of radiotherapy. High resolution CT (HRCT) scans were obtained when signs and symptoms of pneumonitis were developed after completion of radiotherapy. Results : Thirteen patients eventually developed signs and symptoms of clinical pneumonitis 씬file four patients did not. TGF-$\beta$ 1 levels were elevated in all 13 patients with pneumonitis, which showed characteristic pattern of elevation (38.45 ng/ml at pretreatment, 13.66 ng/ml during radiotherapy, then 60.63 ng/ml at 2-4 weeks after completion of radiotherapy). The levels of TNF- $\alpha$ and IL-6 were also elevated In the group of patients who developed pneumonitis but the pattern was not characteristic. Conclusions : Changes in plasma TGF$\beta$-1 levels before, during and after radiotherapy appears to be a useful means by which to identify patients at risk for the development of symptomatic pneumonitis. Other cytokines like TNF- $\alpha$ and IL-6 shows no meaningful changes in association with radiation pneumonitis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.185-192
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Caucasian and African American. Material and methods: The size and shape of these trays were designed from the results of the dental arch size of Korean adults. Tray samples were made by CAD-CAM working. Sixty Caucasian (male:30, female:30) and sixty African American (male:30, female:30) were selected for taking irreversible hydrocolloid impression using these trays. The author measured the width and length of impression material on the several measuring points. Results: 1. Uniform impression material width was achieved by controling the width of the tray using stops and beveled guides. 2. In the maxillary tray on the Caucasian, the impression material thickness was measured to be rather great showing thickness of the midpalatal part 13.0 mm. 3. In the maxillary tray on the African American, the impression material thickness was measured to be rather great showing thickness of the midpalatal part 12.0 mm, posterior palatal part 11.0 mm and the labial frenum width was 11.0 mm. 4. In the maxillary tray on the African American, the impression material width of posterior border (0.8 mm) was measured to be small. 5. In the mandibular tray on the Caucasian, the impression material width was measured (2.7-6.7 mm) and posterior border width (2.1 mm) was measured small. The impression material length was measured (2.8-6.7 mm). 6. In the mandibular tray on the African American, the impression material width was measured to be rather great showing width of the labial frenum 9.2 mm and the width of posterior border was measured too small (0.3 mm). Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Caucasian and African American, we can take more easy and accurate dental impressions.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.306-312
• /
• 2011

Objectives: This clinical study evaluated the effect of light activation on the whitening efficacy and safety of in-office bleaching system containing 15% hydrogen peroxide gel. Materials and Methods: Thirty-three volunteers were randomly treated with (n = 17, experimental group) or without light activation (n = 16, control group), using Zoom2 white gel (15% $H_2O_2$, Discus Dental) for a total treatment time of 45 min. Visual and instrumental color measurements were obtained using Vitapan Classical shade guide and Shadepilot (DeguDent) at screening test, after bleaching, and 1 month and 3 month after bleaching. Data were analyzed using t-test, repeated measure ANOVA, and chi-squared test. Results: Zoom2 white gel produced significant shade changes in both experimental and control group when pre-treatment shade was compared with that after bleaching. However, shade difference between two groups was not statistically significant (p > 0.05). Tooth shade relapse was not detected at 3 months after bleaching. The incidence of transient tooth sensitivity was 39.4%, with being no differences between two groups. Conclusions: The application of light activation with Zoom2 white gel system neither achieved additional whitening effects nor showed more detrimental influences.