• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.27-34
• /
• 2010

Recently, high-speed railway systems have gained increased interest as a means of environmental friendly transportation, and numerous bridges for high-speed railways have been constructed accordingly. However, bridge design for high-speed railways requires more consideration than conventional railway design because fast-moving trains will lead to significant impact on bridge structures. Thus, this research proposes a revised design considering both bridge-rail longitudinal interaction and dynamic effect of trains to ensure stability of fast travelling trains. To validate the proposed design algorithm, numerical analyses are performed and compared using a constructed 250 m long bridge with 5 spans for a high-speed railway. From the numerical results, the proposed optimum design of high-speed railway bridges exhibits the most economic life-cycle-cost (LCC) when compared with several existing design approaches.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.217-224
• /
• 2008

Trusses are found in many common structures such as bridges and buildings. The truss is a fundamental design element in engineering structures and it is important for an engineer to apply the truss design to engineering structures by understanding the mechanics of truss element. In an experimental course, the experiment selves as an example of the usefulness of the Wheatstone bridge in amplifying the output of a transducer. With the apparatus described here, it is possible to obtain experimental measurements of forces in a truss member which agree within errors to predictions from elementary mechanics. The apparatus is inexpensive, easy to operate, and suitable as either a classroom demonstration or student laboratory experiment. This device is a small table-top experiment. The conventional strain measuring device is costly and complicated - it is not simple to understand its structure. Hence, strain gage and the A/D converter are assembled to come up with a load and a strain measuring device. The device was tested for measuring the strain in a loaded specimen and the results were compared to those predicted by theory of mechanics.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.1
• /
• pp.167-180
• /
• 1996

In the scalar processing oriented machine scalar operations must be performed for the vector processing as many as the number of vector components. So called a vector processing mechanism by the von Neumann operational principle. Accessing vector data hasto beperformed by theevery pointing ofthe instruction or by the address calculation of the ALU, because there is only a program counter(PC) for the sequential counting of the instructions as a memory accessing device. It should be here proposed that an access unit dimensionally to address components has to be designed for the compensation of the organizational hardware defect of the conventional concept. The necessity for the vector structuring has to be implemented in the instruction set and be performed in the mid of the accessing data memory overlapped externally to the data processing unit at the same time.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.1
• /
• pp.23-29
• /
• 1995

There are many articles about the HID lamps about it's characteristics and simulation methods for lamp design or ballast design. For the electronic ballasts of HID lamps, There are some problems caused by acoustic-resonance which destabilizes the arc of HID lamps. So, some studies suggest the methods to avoid it. For example, the methods suggested are high frequence driving over 100[kHz], and mixed frequence driving which alternates high frequence and low frequence, and squarewave driving etc. This study suggests the electronic ballast of HID lamps that solves the problems of acoustic-resonance, and can control the luminance by constant current boostes chopper of which frequence is 30[kHz] and by the squarewave driving of which frequence is 55.5[Hz.] As follows, we have the good electronic ballast for HID lamps which has the characteristics of a light weight, and a function of luminance control and a high quality luminosity and which saves electrical energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.725-734
• /
• 2014

Modernization projects are actively underway to replace conventional logistics equipment for the development of the 21st century logistics management system. The modernized logistics system is expected to expand to each troops on future. In this paper, we deal with simulation of automated logistics center to analyse the current system. Especially, the alternative to the same scale is designed based on needs of military distinctiveness. As a result, it can be effectively compared the current system. The result obtained in this design process is comprehensively analyzed by the AHP(Analytic Hierarchy Process). The proposed method in this study is allowed to cost-effectively evaluate current and future automated logistics center. And, that is expected to contribute to modernization projects of the military logistics system.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.161-161
• /
• 1996

본 연구에서는 차량(승용차) 시동용 수퍼캐패시터-밧데리 조합시스템에 적용할 시작품 전기이중층 수퍼캐패시터(super-capacitor:SC)를 설계 제작 개발하고 그 성능 특성을 확인하였다. 재래식의 차량용 밧데리의 비동력(specific power)이 100~200 W/kg에 비하여 전기이중층 SC의 경우는 1,000~3,000 W/kg으로 단위 총량당의 동력이 매우 크다. 또한 충방전시의 화학반응이 없는 관계로 인하여 충전식 2차 전지에 비하여 사용수명이 매우 길다. 이러한 SC를 기존의 밧데리와 함께 조합하여 차량 시동용으로 사용하게 되면 밧데리의 사용수명을 2~3배 길게 할 수 있으며 밧데리는 시동에 필요한 큰 전류의 방전이 요구되지 않으므로 그 용량과 크기가 대체로 절반이상 줄어든다. 또한 매우 낮은 온도의 기후조건에서는 밧데리의 방전효율이 급격히 저하되므로 이를 대비하여 필요 이상의 과용량, 과중량 밧데리의 사용이 실제로 행해지고 있으나 조합시스템의 차량 시동시에는 SC가 갖는 특성상 -5$0^{\circ}C$까지의 기후조건에서도 방전효율이 크게 저하되지 않은 채 시동전류를 공급해주므로 혹한지역이나 혹한시의 차량시동에도 탁월한 시동성능을 갖는다. 설계 제작된 SC는 저장에너지 6KJ, 정격전압 12Volt, 설계축전용량 70F 그리고 사용은 도 범위가 섭씨 영하 25도에서 영상 50도이며 무공해성 수용성 전해질을 사용하였으며, 제작된 CS는 사용온도 범위에서 축전용량 65F - 85F, 내부저항 1.8mOhm - 5.2mOhm의 변화를 보였으며, 정상시동에 필요한 방전전류 300Amp의 경우 2.6초의 방전시간, 약 89%의 방전효율을 보였다. 현재까지 상온하에서 30.000회의 충방전 시험결과로서는 방전효율의 저하가 없는 양호한 성능을 보였으며, SC의 시범 작동시험을 실차(소나타 1800cc)에 장착하여 수행한 결과 20회 이상의 연속시동에서도 아무런 문제점 없이 잘 동작하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.86-94
• /
• 1984

In order to improve the rotational performances of NC lathe spindle system in high speed range, a new type(Floating-type driven by V-belt)spindle system was optimally designed and experimented. Through the results of the experiments, the rotational performances of the new type spindle system was discussed and compared with the three equivalent conventional lathe spindle systems. The spindle rotational accuracy( radial error motion of spindle axis), the accelation and the temperature rise of the front spindle bearings for the non-cutting operation were considered as the spindle rotational performances. The radial error motion of the spindle axis was measured by applying the modified L.R.L. method. Compared with the equivalent conventional spindle systems, the following results were obtained. (1) The new type spindle system reduces the radial error motion of the spindle axis in high speed range(1800rpm-2000rpm). (2) The new type spindle system reduces the acceleration and the temperature rise of the spindle bearings considerably with increasing the spindle speed. It is also confirmed that, by this new type spindle system, the max. allowable speed can be increased with satisfying the spindle rotational performances.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.279-282
• /
• 2007

본 연구의 목적은 조정을 거친 수치지도를 이용하여 3차원 도시공간모델을 생성하는 자동제작기를 제안하는 것이다. 일반적인 디지털 도시공간모탤 제작방식에 대해 분석하여 3차원 도시공간모델 제작에 필요한 소요정보 및 공간제작함수(기능, Method} 등을 추출한다. 수치지도에서 3차원 도시공간모델 제작에 필요한 정보를 추출하고 이런 정보들을 가공하여 모텔제작에 사용가능한 정보로 바꾸어 준다. 또한 수치지도를 이용하여 3차원 모델을 제작할 때 사용자가 필요로 하는 부가정보들을 수동으로 입력할 수 있도록 한다. 수치지도에서 얻는 정보에 공간제작함수를 적용해서 3차원 모텔을 제작한다. 수치지도가 2차원지도로만 활용되고 있는 현실이며 수치지도의 다양한 3차원 정보를 이용한 3차원 도시 공간모델 자동제작을 제안함으로써 재래식 모델제작에 필요했던 대량의 시간과 노동력을 절감할 것이고 또한 제작된 도시공간모텔은 건축이나 도시설계분야에서 보다 경제적이고 보다 쉽게 활용될 수 있을 것이라고 기대된다.

• Journal of the Society of Disaster Information
• /
• v.9 no.2
• /
• pp.206-213
• /
• 2013

The paper presents the field applications and evaluation results of solid epoxy asphalt mixture for steel bridge deck. The material was developed in Japan. The material properties of epoxy asphalt mixture were evaluated through various literature review, and the mix design and mixture evaluation were conducted. According to the research results, the application of epoxy asphalt mixture for steel bridge deck was noticeable compare to the conventional ones. In addition, results from 3D finite element analysis showed that the performance of epoxy asphalt mixture for steel bridge deck was proved to be satisfied. As a result, a pilot test section was constructed using the epoxy asphalt mixture produced from conventional batch plant system. BPT test results showed that friction of the epoxy asphalt mixture was higher than the requirements compare to that of the conventional one.

• Convergence Security Journal
• /
• v.18 no.2
• /
• pp.41-47
• /
• 2018

Theorists of war have often used Clausewitz's trinity theory as a framework for analyzing war strategies and histories. Heretofore, studies on cyber warfare have focused primarily on laws, policies, structuring organizations, manpower, and training pertaining to preparing the cyberspace for war. Currently, studies highlighting the comparative characteristics of war in cyberspace, how it differs from conventional warfare, and analytical frameworks for understanding war in cyberspace are rare. Using Clausewitz's trinity theory, this paper interprets the essence of war from the perspectives of (1) Intellect, (2) Bravery, and (3) Passion, to propose an analytical model for understanding war in cyberspace, one that factors in the intrinsic qualities and characteristics of cyberspace under spatial and temporal constraints. Furthermore, this paper applies the aforementioned analytical model to the Iraq War and concludes with a theoretical illustration that cyber warfare played a significant role in winning the war.