• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.75-84
• /
• 2021

In this study, to evaluate deterioration propagation life and deterioration curve of the shop painted and field re-painted steel bridges, accelerated corrosion tests were carried out on 4 types of heavy-duty painting systems with different surface treatments. The surface treatments prior to painting were examined by hand tool(SSPC SP-2), power tool(SP-3,) or blast cleaning(SP-10) considering shop painting and field re-painting. The paint deterioration curves for each painting system and surface treatment were evaluated based on corrosion propagation from the initial paint defects. From the test results, the paint deterioration life of shop painted and field re-painted system was evaluated and compared by using corrosivity categories and durability performance evaluation of structural steel. The deterioration propagation life of shop and field paint was estimated in 18 to 21 years and 5.3 to 8.0 years with atmospheric corrosion category C4.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.82-82
• /
• 2014

마감 도장이 완료된 면이 장기간 노출된 상태에서 후속 작업으로 인해 금속 분진 등의 오염물이 쌓이면 수분 및 염분 등과의 반응으로 도장 표면에 녹 등의 2차 오염이 발생하여 광택이나 표면 미려함 등을 잃어버리게 된다. 이럴 경우 소요되는 시간과 경비를 줄이기 위해 재도장 작업 대신 도장 표면의 오염 막을 제거하기 위한 방법으로 rust remover가 사용되고 있으나, 현재 rust remover 사용에 따른 도막 열화에 관한 객관적인 자료가 없는 실정이다. 본 연구에서는 당에서 사용되고 있는 선박용 마감 도료를 대상으로 rust remover가 도막 표면 열화에 미치는 영향에 대하여 조사 검토하다.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.633-640
• /
• 2015

Polymer cement slurry (PCS) is made from organic polymer dispersion and cement has good adhesion to steel, waterproofness and acid resistance due to being of polymer films formed in cement slurry. The purpose of this study is to evaluate the bond strength of coated rebar by polymer cement slurry made of EVA and ultra high-early strength cement. The test pieces are prepared with EVA polymer dispersion and ultra high-early strength cement having four types of polymer-cement ratios, four types of coating thicknesses and four curing ages, and tested for the bond strength test. From the test results, in general, bond strength of PCS-coated rebar is better than that of uncoated rebar and epoxy-coated rebar. It is also high bond strength at curing ages of 7-day, and coating thicknesses of $75{\mu}m$ and $100{\mu}m$. The maximum bond strength of PCS-coated rebar with ultra high-early strength cement and EVA at polymer-cement ratio of 80%, and coating thickness of $100{\mu}m$ is about 1.32 and 1.38 times respectively, the strength of uncoated rebar and epoxy-coated rebar. It is apparent that the curing age, coating thickness, type of polymer and cement are very important factors to improve the bond strength of PCS-coated rebar to cement concrete. We can have basic information that PCS-coated rebar with polymer-cement ratio of 80% or 100% and coating thickness of $100{\mu}m$ at curing age of 1-day can replace epoxy-coated rebar.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.207-216
• /
• 2021

The purpose of this study was to empirically examine the servicesape focused on Taekwondo gym. More specifically, this study was to investigate the effect of servicescape on gym's image, parents' satisfaction and re-enroll intention. The 250 survey questionnaires were distributed among the trainee's parents of through convenience sampling. Due to the reliability of data, 18 samples were discarded and 232 samples were put to actual analysis. By using SPSS Ver. 21.0, data were analyzed for frequency analysis, exploratory factor analysis, reliability analysis, correlation analysis and multiple regression analysis. The results of the study were as follows. First, the variables of servicescape which was ambient condition, cleanliness and comfort had positive effects on gym's image. Second, the servicescape which was consist of ambient condition, cleanliness, comfort and safety had significantly effects on parents' satisfaction. Third, servicescape which was consist of s ambient condition, cleanliness, comfort and safety had significantly effects on re-enroll intention. This study has a positive meaning in that it confirms the importance of the servicescape of the Taekwondo gym and presents the operation strategy through the servicescape.

• Journal of the Korea Concrete Institute
• /
• v.25 no.1
• /
• pp.73-80
• /
• 2013

Polymer cement slurry (PCS) made from organic polymer dispersion and cement has good adhesion to steel, waterproofness and acid resistance due to being of polymer films formed in cement slurry. The purpose of this study is to evaluate the mix design conditions at early curing age of PCS-coating material effected on improvement in bond strength of coated rebar. The test pieces are prepared with two types of polymer dispersions such as St/BA and EVA, four polymer-cement ratios, two types of cement, four coating thicknesses and three curing ages, and tested for the bond strength test. From the test results, in general, bond strength of PCS-coated rebar is better than that of uncoated rebar and epoxy-coated rebar. It is also high bond strength at curing ages of 7-day or less, and coating thicknesses of $75{\mu}m$ and $100{\mu}m$. The maximum bond strength of PCS-coated rebar at curing age of 3-hour is almost same as that of curing age of 1-day and 7-day. The maximum bond strength of PCS-coated rebar with ultra high-early strength cement and St/BA at polymer-cement ratio of 80%, and coating thickness of $100{\mu}m$ is about 1.52 and 1.58 times respectively, the strength of uncoated rebar and epoxy-coated rebar. It is apparent that the curing age, coating thickness, type of polymer and cement are very important factors to improve the bond strength of PCS-coated rebar to cement concrete. We can have basic information that PCS-coated rebar with curing age at 3-hour and coating thickness of $100{\mu}m$ can replace epoxy-coated rebar.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.247-258
• /
• 2010

We conducted optical microscopy, infra-red spectroscopy and SEM-EDS analysis of the lacquer layers on the wooden coffins excavated from King Muryeong's Tomb. We found four varnishing methods according to the sub-materials of lacquer layers: The lacquer of wooden coffins with black paint layer on the surface were classified with two groups; single layer and three layers. The lacquer of wooden coffins without black paint layer on the surface were classified with two groups; single layer and two layers. IR spectra of the laquer were same as those of the oriental laquer. The SEM-EDS analysis showed that the lacquer layers were mixed with iron, copper and calcium.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.29-30
• /
• 2007

내지문 강판은 가전재 내외판으로 사용되며 주로 전기아연도금강판을 이용한다. 그러나 최근 일부 가전사에서는 전기아연도금강판 대신 용융아연도금강판으로 일부 대체가 되고 있으며 특히 분체도장을 하는 외판에서 용융아연도금강판의 수요가 늘어나게 되었다. 이에 본고에서는 내지문 용융도금강판 개발을 위해 분체도장물성이 우수한 내지문 수지를 사용하여 기존 전기도금강판과 비교 테스트를 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.5
• /
• pp.157-163
• /
• 2006

This study is on the evaluation of double surface protection method using water repellent primer and final top coat to protect concrete. Water repellent agent has been applied on the final top coat to protect concrete. However, to make up for the weakness to the ultraviolet of the water repellent, the work procedure of these protectors is done vice versa. This combination of protectors was compared with existing ones in this study. Even though the final top coat was applied on the water repellent primer, its adhesive strength met to KS F 4936-' 03 with other protectors used in this study. All surface protectors used in this study were excellent in protecting concrete. Especially, in case of applying with final top coat in conjunction with water repellent primer, the resistance against chloride ion penetration and neutralization by $CO_2$ was more efficient than other surface protectors used in this study under this given condition.

• Korean Architects
• /
• v.3 no.5 s.5
• /
• pp.52-63
• /
• 1968

• Korean Architects
• /
• v.2 no.4 s.4
• /
• pp.51-62
• /
• 1967