• Journal of Korean Society of societal Security
• /
• v.3 no.1
• /
• pp.51-60
• /
• 2010

This study measured for comparison and analysis the correlation of River pollution and Soil contamination, based on the results of previous research, and then in order to increase the efficiency of study, heavy metals which cause serious side effects was limited to the case among pollutants. This study focused on the rivers that near the Urban and industrial districts, for example, Nak-Dong river, An-Yang river, Tae-Hwa river and the rivers that near the farm land or pasture, for example, Yeong-San river, Mi-Ho river, then compare and analyze the degree of actual pollution as gathered the results of Previous research. Correlationship about pollutants of river near the Urban, industrial area and drainage basin its river has been proven, and this expected because of the strong influence by point pollution source. On the other hand, I can found the opposite relationship where the river near the farm land or pasture, and this probably because of the influence by nonpoint pollution source.

• Journal of Korean Society of societal Security
• /
• v.3 no.1
• /
• pp.25-32
• /
• 2010

Detecting rebars in side the concrete structures is one of the important steps in assessing condition of the structure. In order to determine the detection capability of locating rebars inside the concrete, two types of equipments, which use radar system and electromagnetic system each, were tested. Four concrete specimens which have the dimensions of $1,000mm(length){\times}300mm(width)$ with different thickness and diameter of steel bars were applied. A series of testing was achieved after drying in air for 90 days, immersed in water for 3, 24, 48 hour and 28 day. From the experimental outcome, it is shown that error is increased as the diameter of rebar enlarge in case of electromagnetic method. In case of radar method, the detection of embedded rebars in deep is good in the view of reliability. As moisture content increase from 3.6% to 5.5%, the relative permittivity of concrete test specimens show tendency to increase, too. Therefore, it is shown that moisture content is one of the major contributing factors to determine the relative permittivity. And the relative permittivity regression equation is suggested.

• Journal of Korean Society of societal Security
• /
• v.3 no.1
• /
• pp.33-42
• /
• 2010

This study predicts the stress history for truss bridge with local damages by using global-local model combination method. For this end, the global structure is modeled by 3D frame elements and the selected local details are modeled by shell elements. Then superposition principle enable the global-local model to be combined interactively. Because the frame model cannot consider the rigidity of gusset plate and the interation of structural members due to the complexity of stress distribution in truss connection. The section modification factors are proposed to calibrate the stiffness of global frame element. The global-local model combination is verified by comparing the numerical results with experimental data obtained from the proof loading test to the operating truss bridge. Furthermore, stress histrories of the truss bridge are generated in the consideration of the rigidity of truss connection with local damage by using the combination method.

• Journal of Korean Society of societal Security
• /
• v.3 no.1
• /
• pp.43-50
• /
• 2010

Sliding accidents on the road have a high percentage by road freezing, especially, they often have appeared at bridges and Tunnel of freezing areas. Thus, the stability of road operations is enhanced by preventing partial freezing phenomenon. According to the geothermal snow melting system analysis, a pattern of thermal conductivity is found out; pavement materials of concrete and asphalt where the system is buried. The heat transfer simulation is essential when the geothermal snow melting system is applied according to heating exchanger pipe placed in the lower pavements. The model tests are conducted on low temperature in freezer using the manufactured test model which is equal to pavement materials. Many variables are discovered from numerical analyses under the same conditions with model test.

• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.81-87
• /
• 2008

The cigarette holds more than 10 percents of the entire fire accidents despite the number of smokers rapidly decreases every year. The purpose of this study is to examine the ignition characteristics of cigarette by experimentation. This study analyzed the cases of fires inferred that they were caused by cigarette in Incheon during 2006. As the representative ignition materials, corrugated board, gasoline, lacquer thinner, tarpaulin, flexible PVC sheet, and poly ethylene were tested. In this experimentation, the corrugated board was ignited by cigarette. However gasoline, lacquer thinner, tarpaulin, flexible PVC sheet, and poly ethylene were seldom ignited. Meanwhile most fire investigators have argued that oils and tents were ignited by cigarette, but this study experimentally proved that such an argument might be ungrounded.

• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.63-67
• /
• 2008

This study focuses on assessing the security ri sk or the terrorism in chemical process industries. This research modifies conventional method for assessing the terrorism risk. The risk assessment method is developed and it is implemented as software to analyze the possibility of terrorism and sabotage. This program includes five steps; asset characterization, threat assessment, vulnerability analysis, risk assessment and new countermeasures. It is a systematic, risk based approach in which risk is a function of the severity of consequences of an undesired event, the likelihood of adversary attack, and the likelihood of adversary success in causing the undesired event. The reliability of the program is verified using a dock zone case. The case dock zone includes a storage farm, a manufacturing plant, an electrical supply utility, a hydrotreater unit, many containers, and administration buildings. This study represents chemical terrorism response technology, the prevention plan, and new countermeasure to mitigate by using risk assessment methods in the chemical industry and public sector. This study suggests an effective approach to the chemical terrorism response management.

• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.108-115
• /
• 2018

The purpose of this study was to classify VR programs according to their characteristics and associations by the disaster management phase and firefighting school curriculum, and set priorities among VR fire training and training programs using AHP analysis., The relative priority is given considering its importance and urgency. As a result of the study, firefighting education and training classes showed the highest level of response. The relative priority of the subcategories was highest in the prevention stage. The simulation implementation for the evacuation experience was highest in closed spaces, such as a subway, and the simulation for the special firefighting vehicle was highest in the contrast phase. In the response phase, real fire simulation training was the highest. In the recovery phase, virtual reality training was the most effective in determining the fire situation based on the fire database.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.935-942
• /
• 2018

Precipitation has a wide range of applications, such as the management and operation of dams and rivers, supply of dranking water for urban and industrial complex, farming and fishing, forest greening, and safety management. In order to prepare for disasters and to obtain economical effects in case of flood damage, it is necessary to measure accurate precipitation. In this study, we carried out the characteristics tests for various types of rainfall gauge using integrated verification system, which can analyze the performance of collective type rainfall gauge. The uncertainty for tipping bucket rain gauge was 0.0041 mm, where weight type and surface tension type was 0.0045 mm and 0.0039 mm respectively. Therefore, the uncertainty according to the type and characteristics of the precipitation system is not significantly different. The uncertainty is also influenced greatly by the resolution.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.437-445
• /
• 2010

There is increasing interest, on the global basis, in the operation of ocean surface radars for measurement of coastal sea surface conditions to support environmental, oceanographic, meteorological, climatological, maritime and disaster mitigation operations. In south Korea, ocean surface radars are operating to monitoring oil spill, outflow from dike or preventing from safety-accidents in the 6 regions (16 radial sites) by main frequency about 13, 25 and 42 MHz until the present. However, that ocean surface radars have been operated on an experimental spectrum basis. In the results of 3~50 MHz band domestic analysis to improve the regulatory status of the spectrum used by oceanographic radars, it was demonstrated that sufficient frequency bands are available for oceanographic radars on the frequency band above 20 MHz. It is difficult to deploy and operate oceanographic radars in the sub-bands below 20 MHz except for 13 MHz band. For using HF ocean surface radars one should understand the spectrum environment in Korea and should prepare a suitable operating system and data processing techniques.

• The Journal of the Korea Contents Association
• /
• v.19 no.4
• /
• pp.54-62
• /
• 2019

With regard to industrial accidents, large corporations and public institutions are continuously reducing disasters through systematic management. However, industrial accidents continue to increase in small-scale workplaces. In order to ensure the safety of workers, the government supports the purchasing of industrial accident prevention equitments through financial support projects for small business. However, despite the financial support, the effectiveness of the project is hardly verified. In this study, we analyze the policy effectiveness of the financial support program for industrial accident prevention in a small-scale workplace using the difference-in-difference method. To achieve research purposes, we used the data on the occurrence of industrial accidents, the status of workplaces by year and the data on the status of workplace benefiting from financial support program for the past 10 years. This study is significant in that it analyzed the net effect of financial support programs for disaster reduction in the small business site.