• Title/Summary/Keyword: 재결합

Search Result 353, Processing Time 0.025 seconds

안티모니 셀레나이드 태양전지의 연구 개발 동향: 에너지 밴드 정렬 최적화

  • ;;Wang Yazi
    • Bulletin of the Korea Photovoltaic Society
    • /
    • v.9 no.2
    • /
    • pp.18-28
    • /
    • 2023
  • 지구상에 풍부하며 저독성 소재인 안티모니 셀레나이드(Sb2Se3)는 재료가 갖는 우수한 광전자적 특성과 장기 내구성으로 차세대 태양전지 소자로 크게 주목 받고 있다. 또한, 비교적 짧은 연구기간 동안 빠른 성장 속도를 보여줬으며, 2014년 2.26%에서 8년의 연구기간 동안 약 5배인 2022년 10.57%를 달성하였다. 하지만, 여전히 기존의 칼코지나이드계 박막 태양전지인 CdTe(22.1%) 및 Cu(In,Ga)Se2(23.35%)가 달성한 효율에 비해 낮은 변환 효율을 보이고 있으며, 이는 계면에서 발생하는 캐리어 재결합으로 인한 개방전압 손실 문제가 주 원인으로 대두되고 있다. 따라서, Sb2Se3 광 흡수층에 인접한 전자 및 정공 수송층 사이에 적절한 밴드 정렬을 구축하여 캐리어 재결합 손실을 줄이는 것이 고효율 Sb2Se3 태양전지를 구현하기 위한 핵심 전략 중 하나이다. 본 원고에서는 Sb2Se3 광 흡수층의 기본적인 특성과 Sb2Se3 태양전지의 최근 연구 성과에 대해 간략하게 설명하고자 하며, 특히 전자 및 정공 수송층 적용을 통한 에너지 밴드 정렬 최적화에 관련된 내용을 중점적으로 소개하고자 한다. 또한, Sb2Se3 박막 태양전지 성능의 병목 현상을 극복하기 위한 잠재적인 연구 방향에 대해서도 논하고자 한다.

  • PDF

Preparation of Al2O3-coated TiO2 Electrode for Recombination Blocking of Photoelectron in Dye-Sensitized Solar Cells (염료감응형 태양전지의 광전자 재결합 방지를 위한 Al2O3 코팅 TiO2 전극 제조)

  • Hwang, Kyung-Jun;Yoo, Seung-Joon;Jung, Sung-Hoon;Kim, Sun-Il;Lee, Jae-Wook
    • Applied Chemistry for Engineering
    • /
    • v.21 no.2
    • /
    • pp.162-168
    • /
    • 2010
  • To increase the energy conversion efficiency of dye sensitized solar cells (DSSCs), it has been widely studied how to effectively transferred the electron generated from the adsorbed dye to the $TiO_{2}$ electrode for avoiding the recombination of injected electrons and iodide ions ($I^-/I_3^-$). For the blocking of the recombination, in this study, $Al_2O_3$-coated $TiO_{2}$ electrode was prepared and applied for DSSCs. In especial, the optimal preparation conditions of $Al_2O_3$ coated onto $TiO_{2}$ porous film was proposed for higher energy conversion efficiency. As a result, the solar cells fabricated from $Al_2O_3$-coated (i.e., particle size of bohemite sol : 100 nm) $TiO_{2}$ electrodes showed superior conversion efficiency (9.0%) compared to the bare $TiO_{2}$ electrodes (7.5%).

Improvement of Solar Cell Efficiency according to AC Voltage Variation of Electron Relay Enhancer in High Efficient Solar Cell System using Electron Relay Enhancer (전자전달증대기를 이용한 고효율 태양전지 시스템에서 전자전달증대기 입력 교류 전압 변화에 따른 태양전지 효율 향상에 대한 연구)

  • Kim, Hak Soo;Ryu, Young Kee;Lee, Hyuk;Yun, So Young
    • Journal of the Korean Vacuum Society
    • /
    • v.22 no.3
    • /
    • pp.168-173
    • /
    • 2013
  • In this paper, we would like to introduce Electron Relay Enhancer (ERE), a supplementary device, which improves commercial solar cell efficiency minimizing electron-hole recombination of solar cell. The ERE in this study is mainly composed of two capacitors which are connected to AC power source and bridge diode system which controls electron flow direction. Two capacitors repeat collecting electrons from solar cell and pumping the collected electrons to load resistance or inverter through the bridge diode system. While one positively charged capacitor collect electrons, the other negatively charged one pumps electrons. A positively charged capacitor pulls the more exited electrons from the solar cell, before the exited electrons recombine the holes in solar cell. That is why the ERE system enhances solar cell efficiency. As a result, the measured power increase of the solar cell with the ERE is varied from 5.9 W to 25.6 W in each experimental condition. Maximal increase rate of the solar cell power with ERE is 30.8% of solar cell power without ERE.

A Study on Electrolysis of Heavy Water and Interaction of Hydrogen with Lattice Defects in Palladium Electrodes (팔라디움전극에서 중수소의 전기분해와 수소와 격자결함의 반응에 관한 연구)

  • Ko, Won-Il;Yoon, Young-Ku;Park, Yong-Ki
    • Nuclear Engineering and Technology
    • /
    • v.24 no.2
    • /
    • pp.141-153
    • /
    • 1992
  • Excess tritium analysis was peformed to verify whether or not cold fusion occurs during electrolysis of heavy water in the current density range of 83~600 mA/$\textrm{cm}^2$ for a period of 24 ~ 48 hours with use of palladium electrodes of seven different processing treatments and geometries. The extent of recombination of D$_2$ and $O_2$gases in the electrolytic cell was measured for the calculation of accurate enthaplpy values. The behavior and interaction of hydrogen atoms with defects in Pd electrodes were examined using the Sieverts gas charging and the positron annihilation(PA) method. Slight enrichment of tritium observed was attributed to electrolytic enrichment but not to the formation of a by-product of cold fusion. The extent of recombination of D$_2$and $O_2$gases was 32%. Hence the excess heat measured during the electrolysis was considered to be due to the exothermic reaction of recombination but not to nuclear fusion. Lifetime results from the PA measurements on the Pd electrodes indicated that hydrogen atoms could be trapped at dislocations and vacancies in the electrodes and that dislocations were slightly more preferred sites than vacancies. It was also inferred from R parameters that the formation of hydrides was accompanied by generation of mostly dislocations. Doppler broadening results of the Pd electrodes indicated that lattiec defect sites where positrons were trapped first increased and then decreased, and this cycle was repeated as electrolysis continued. It can be inferred from PA measurements on the cold-rolled Pd and the isochronally annealed Pd hydride specimens that microvoid-type defects existed in the hydrogen-charged electrode specimen.

  • PDF

Photoacoustic Investigation of Carrier Transport and Thermal Diffusivity in GaAs and Si (광음향분광법을 이용한 GaAs와 Si 반도체의 열확산도 측정과 운반자특성 연구)

  • Lim, Jong Tae;Han, Ho Youn;Park, Seung Han;Kim, Ung;Choi, Joong Gill
    • Journal of the Korean Chemical Society
    • /
    • v.41 no.7
    • /
    • pp.329-336
    • /
    • 1997
  • Photoacoustic spectroscopy was utilized to investigate the carrier transport and the thermal diffusivity in GaAs and Si. From the frequency dependence of the photoacoustic signal, it is found that heat source was originated from the instantaneous thermalization process in low frequency region. In high frequency region, however, the heat was generated by the nonradiative bulk recombination and the nonradiative surface recombination processes. It was also shown that the photoacoustic effects in GaAs of a direct band gap were governed by all three processes and those in Si of an indirect band gap were produced by the instantaneous thermalization and the nonradiative bulk recombination only. The phase of the photoacoustic signal showed a minimum value in GaAs. In Si, the phase of the photoacoustic signal was monotonically decreased as the modulation frequency was increased, demonstrating the above-mentioned mechanisms of the generation of heat. By measuring the photoacoustic signal, thermal diffusivities of semiconductors were determined to be ∼0.35 ㎠/s for GaAs and ∼1.24 ㎠/s for Si. In addition, the similar values of thermal diffusivities were obtained from the curve fitting of photoacoustic phase spectra.

  • PDF

Transport parameters in a-Se:As films for digital X-ray conversion material using the moving-photocarrier-grating technique (moving-photocarrier-grating 기술을 이용한 디지털 X-선 변환물질 a-Se:As의 수송변수)

  • Park, Chang-Hee;Nam, Sang-Hee;Kim, Jae-Hyung
    • Journal of radiological science and technology
    • /
    • v.28 no.4
    • /
    • pp.267-272
    • /
    • 2005
  • The effects of As addition in amorphous selenium (a-Se) films for digital X-ray conversion material have been studied using the moving photocarrier grating (MPG) technique. This method utilizes the moving interference pattern generated by the superposition of the two frequency shifted laser beams for the illumination of the sample. This moving intensity grating induces a short circuit current, jsc in a-Se:As film. The transport parameters of the sample are extracted from the grating-velocity dependent short circuit current induced in the sample along the modulation direction. The electron and hole mobility, and recombination lifetime of a-Se films with arsenic (As) additions have been obtained. We have found an increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film, whereas electron mobility decreases with As addition due to the defect density. The transport properties for As doped a-Se films obtained by using MPG technique have been compared with X-ray sensitivity for a-Se:As device. The fabricated a-Se(0.3% As) device film exhibited the highest X-ray sensitivity out of 5 samples.

  • PDF

Service Management Technique for Efficient Continuos Media Transmission in ATM-specific Distributed Multimedia -On-Demand System (ATM 환경의 분산 MOD 시스템에서 효율적인 CM전송을 위한 서비스 관리 기법)

  • 박세준;이근왕;오해석
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 1998.10a
    • /
    • pp.314-316
    • /
    • 1998
  • 본 논문에서는 ATM-LAN상 MOD서버에서 클라이언트로의 CM데이처의 전송 기술을 위한 서비스 관리 기법을 제안한다. 즉, Navigation서버를 이용한 브라우징 메카니즘, 서버와 클라이언트, 응용 AAL과 QoS간 협상 및 예약 정차의 세션 설정 기술, 프레임의 분열 및 재결합에 관한 알고리즘을 제안하고 구현한다.

  • PDF

Cytokines로 유방면역 증가

  • 손봉환
    • Journal of the korean veterinary medical association
    • /
    • v.29 no.11
    • /
    • pp.641-645
    • /
    • 1993
  • 소 유방염에서 cytokine의 역할연구는 이제 시작단계이다. 근래 시험에서는 재결합 cytokine은 실세포 증가와 염증반응의 조절에 의하여 강화된 세균의 정화능력을 유방에 준다. 그리고 효과인자 세포의 보충결합 효과를 통하여 유방염의 결과를 조절하는 능력이 있다는 것을 제시한다. 현재 앞서가는 연구자들의 도전은 세균의 병원성 증가, 숙주반응이 유선에서 병원균 제거 요구 그리고 cytokine이 이들 반응을 조절할 수 있는 기전, 이들 사이의 상호기전을 더 이해하기 위한 것이다. 이 분야에서 앞으로의 발전은 시험보다 야외상태에서 전달되어지는 것이다. 그리고 효과적인 정보의 증가를 위하여 우리의 관심이 더 많아야 하는 것이고, 유선면역기능 조절이 소 유방염 관리를 위하여 앞으로 cytoki-ne의 치료응용에 큰 잠재력을 제시하는 것이다.

  • PDF

A Frame-based Continuous Media Transmission Technique and Service Management for ATM-specific Distributed Multimedia-)On-Demand System (ATM환경의 분산 MOD시스템을 위한 프레임 기반의 CM전송 기술과 서비스 관리 모델링)

  • Lee, Geun-Wang;Park, Se-Jun;O, Hae-Seok
    • The Transactions of the Korea Information Processing Society
    • /
    • v.5 no.6
    • /
    • pp.1457-1467
    • /
    • 1998
  • 본 논문에서는 ATM-LAN상 Navigation서버를 이용한 브라우징 메카니즘, 서버와 클라이언트, 응용, AAL과 Qos간 협상 및 예약 절차의 세션 설정 기술, 프레임의 분열 및 재결합에 관한 알고리즘을 제안하고 구현한 후, 실험 평가한다. 그리고 사용자에게 효율적인 서비스를 제공하기 위한 서비스 관리 모델로서 서비스 메니저를 모델링한다.

  • PDF

우렁쉥이 배발생 과정에서 유도신호와 중배엽 형성 위치

  • 김길중
    • Proceedings of the Korean Society of Fisheries Technology Conference
    • /
    • 2003.05a
    • /
    • pp.275-276
    • /
    • 2003
  • 인간과 같은 척삭동물문에 속하는 우렁쉥이 (Halocynthia roretzi)의 유생은 척추동물의 체제를 매우 단순화시킨 구조를 하고 있다 (Nishida, 1997). 유생은 약 10여종의 세포들로 구성되며, 미부 중앙에 척삭과 그 위에 신경관의 원형 (prototype)을 갖는다. 모든 배(embryo)들은 초기 발생과정에서 언제나 동일한 세포분열과 발생운명 양식을 나타낸다. 또한, 해부현미경을 이용하여 수정란으로부터 초기 원장배에 이르기까지 원하는 하나의 할구만을 분리, 제거 및 재결합하는 등의 micromanipulation실험이 가능하다. (중략)

  • PDF