• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.188-192
• /
• 1996

재결정 Zircaloy-2의 요드에 의한 응력부식균열의 전파속도를 직류전압강하측정법 (DCPD, Direct Current Potential Drop)을 이용하여 측정하고 임계응력집중계수( $K_{ISCC}$)를 구하였다. 임계요드농도 이상인 0.01 MPa의 요드농도에서, $K_{ISCC}$는 300 $^{\circ}C$의 경우 약 15 MPa√m, 350 $^{\circ}C$의 경우 약 12 MPa√m의 응력계수였으며, plateau 구역에서의 균열속도는 $10^{-4}$~ $10^{-3}$ mm/sec 영역이었다.

• ETRI Journal
• /
• 제10권4호
• /
• pp.140-145
• /
• 1988

엘립소메츠리를 이용하여 $B^+$ 및 $As^+$ 이온이 주입된 실리콘층의 굴절률과 소멸계수를 도우즈 및 열처리 조건의 함수로 조사하였다. $B^+$ 이온주입된 실리콘의 경우 n은 $10^13$ 도우즈 이상에서 증가하고, k는 도우즈 증가에 따라 단조 증가를 나타내었다. RTA 열처리가 furnace 열처리 보다 결정성 회복이 우수하였으며, 등온 열처리 시 약 30분이상에서 거의 완전하게 재결정됨을 볼 수 있었다. $As^+$ 이온주입의 경우 $10^15$이상에서 복소굴절률의 변화를 나타내었으며, 열처리에 대해 k가 n보다 민감하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.320-326
• /
• 1999

In the present investigation, recrystallization occurring during hot rolling of thick steel plate was predicted. The thermo-mechanical history of a material point was traced by the finite element method and the recrystallization was predicted by the Sellars equations. The investigation was performed for 4 different cases; two different pass schedules in conventional rolling and two different pass schedules in controller rolling. Variations of temperature, strain, strain rate and grain size were compared with each other. It was found out that the difference of grain size through thickness was more distinctive in the cases of controller rolling.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.184-187
• /
• 1999

The texture of electrodeposits is related to microstructure surface morphology and mechanical properties. When the electrodeposits annealed the recrystallization texture many be different from the original deposition texture. the <100> and <110> textures of nickel electrodeposits changed to the <100> and <{{{{ SQRT {310 } }}}}> textures when recrystallized The <100> and <{{{{ SQRT {310 } }}}}> mixed texture is changed to the <100> texture. The <002> texture of Zn electrodeposits didn't changed even after recrystallization.

• 소성∙가공
• /
• 제10권2호
• /
• pp.137-143
• /
• 2001

The change of flow stress due to dynamic recrystallization during hot forming process is investigated. A series of mechanical tests has been conducted at various temperatures, and constitutive relations and recrystallization kinetics were formulated from the test results. The effect of dynamic recrystallization to the flow stress was implemented to a commercial FEM code by conditioned remapping of state variables. The datum strain of stress compensation was optimized to minimize the overestimation of forming loads. Suggested datum was formulated as an exclusive function of critical strain for recrystallizalion and validated by mechanical tests and microstructural observations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.203-206
• /
• 1999

The shift of flow behavior due to dynamic recrystallization during hot forming process is investigated, A series of load relaxation and compression tests has been conducted at various temperatures Constitutive relations and recrystallization behaviors were formulated from the mechanical test results, The consideration of dynamic recrystallization during a specific forming process was implemented to commercial FEM package by conditioned remeshing and remapping of state variables. Improvement of Load-Stroke prediction was validated by comparison with experimental results.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.196-200
• /
• 1998

Effect of diffusion induced recrystallization(DIR) on mechanical properties of hot-pressed TiC was in-vestigated. The TiC specimen was electroplated with Cr and then heat-treated at 1550. Through the DIR process a new set of (Ti, Cr) C mixed carbide grains with uniform and small size was formed at the surface. As a consequence the scattering in fracture strength decreased and the toughness increased.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.220-223
• /
• 1997

This paper presents the prediction of microstructure of Inconel 718 disk forgings. The experiments are carried out to examine the recrystallization ratio and grain growth in the forgings. In the experiments, cylindrical billets are forged by two operations with variations of forging temperature and reduction ratio of deformation. Also the finite element program, developed here for the prediction, is used for the analysis, and the results are compared with the experimental ones. It is noted that the comparison appears in sound agreement.

• 소성∙가공
• /
• 제17권2호
• /
• pp.113-116
• /
• 2008

Computer simulation of microstructure evolution during hot forging process is of great interest in recent years. Recrystallization model and grain growth model which use a phenomenological approach were summarized. The upsetting and cogging processes of waspaloy were simulated using $DEFORM^{TM}$ and the change in grain size were investigated in each deformation procedure.

• 한국결정학회지
• /
• 제9권2호
• /
• pp.159-167
• /
• 1998

천연에서 발견되는 유색수정은 자수정, 연수정, 황수정, 청수정, 녹수정, 장미수정 등 그 색의 종류에 따라 크게 6가지로 분류되며 발색 기구에 따라 색중심(color center), 전이금속 불순물(transition metal impurity), 산란(scattering), 전하이동(charge transfer) 등 4가지로 분류된다. 이들은 천연에서 고온고압의 열수가 냉각되면서 그 안아 녹아있던 광물질이 재결정하여 생성된 것이다. 이러한 유색수정은 실험실에서도 합성되며 그 방법은 천연 수정의 생성 과정과 유사하다. 그러나 천연수정 중의 일부는 실험실에서 성장하기가 거의 불가능하기 때문에 다른 방법을 이용하여 유사한 색을 가지게 한다. 본 논문에서는 불순물 원소의 종류 및 수정 격자내의 위치, 최외각 전자의 상태에 따라 색이 달라지는 것을 고찰하고 이러한 유색수정을 합성하는 원리에 대하여 논하고자 한다.