• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.233-244
• /
• 2017

We conducted hydraulic fracturing experiments on cement samples to investigate the dependency of fracture propagation on the viscosity of injection fluid and the in situ stress state. Ten cubic samples (20 cm side length) were produced using cement that was cured in water for more than one month. Samples were placed in a tri-axial compression apparatus with three independent principal stresses. An injection hole was drilled and the sample was hydraulically fractured under a constant injection rate. We measured injection pressures and acoustic emissions (AE) during the experiments, and investigated the fracture patterns produced by hydraulic fracturing. Breakdown pressures increased exponentially with increasing viscosity of the injection fluid. Fracture patterns were dependent on differential stress (i.e., the difference between the major and minor principal stresses). At low differential stress, multiple fractures oriented sub-parallel to the major principal stress axis propagated from the injection hole, and in some samples the fracture orientation changed during propagation. However, at high differential stress, a single fracture propagated parallel to the major principal stress axis. AE results show similar patterns. At low differential stress, AE source locations were more widespread than at high differential stress, consistent with the fracture pattern results. Our study suggests that hydraulic fracturing during shale gas extraction should be performed parallel to the orientation of minimum differential stress.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.44-51
• /
• 2002

This paper describes the performance evaluation and analysis of an Orthogonal Frequency-Division Multiplexing (OFDM) system having the least Inter Symbol Interference (ISI) in a multi-path fading channel environment. Wireless Local Area Network (W-LAN) in accordance with IEEE 802.11a and IEEE 802.11b provides high-speed transmission to universities, businesses and other various places. In addition, service providers can offer a public W-LAN service on restricted areas such as a subway. The proliferation of W-LAN has led to greater W-LAN service demands, but problems are also on the rise in offering a good W-LAN service. In particular, urban areas with high radio wave interference and many buildings are vulnerable to deteriorated QoS including disconnected data and errors. For example, when high-speed data is transmitted in such areas, the relatively high frequency generates ISI between Access Points (AP) and Mobile Terminals (such as a notebook computer), leading to a frequency selective fading channel environment. Consequently, it is difficult to expect a goodW-LAN service. The simulation proves that the OFDM system enables W-LAN to implement QoS in high-speed data transmission in a multi-path fading channel environment. The enhanced OFDM performance with 52 sub-carriers is verified via data modulation methods such as BPSK, QPSK and 16QAM based on IEEE 802.11a and punched convolutional codes with code rate of 1/2 and 3/4 and constraint length of 7. Especially, the simulation finds that the OFDM system has better performance and there is no data disconnection even in a mobile environment by applying a single tap equalizer and a decision feedback equalizer to a mobile channel environment with heavy fading influence. Given the above result, the OFDM system is an ideal solution to guarantee QoS of the W-LAN service in a high-speed mobile environment.

• Restorative Dentistry and Endodontics
• /
• v.33 no.6
• /
• pp.518-525
• /
• 2008

The purpose of this study was to evaluate the effect of the apical sealing according to the depth of the System B Plugger tip when root canal was filled with gutta-percha and sealer by Continuous Wave of Condensation technique in the Type IV canal. 50 simulated resin blocks with J-shaped curvature canals were instrumented by ProTaper (Dentsply Maillefer, Ballagiues, Switzerland) Ni-Ti files using the crown-down technique. Type IV canals were made using a broken ProTaper F3 Ni-Ti file for making a ledge at 3mm short from the working length. And ProTaper F1 Ni-Ti file was used for perforating resin block. The prepared Type IV canals were randomly divided into three experimental groups of 15 each according to the depth of System B Plugger tip. All of experimental groups were obturated with Continuous Wave of Condensation technique. The length of gutta-percha and sealer in lingual of the Type IV canals was measured with a measuring digital calliper under magnifying glass (${\times}2.3$). The results are as follows : 1. In control group, there was no gutta-percha and sealer in lingual canal. 2. 3 mm group showed relatively more gutta-percha than 5mm or 7 mm group (p<0.05). 3. 7 mm group did not showed gutta-percha and relatively more void were observed than 3mm or 5 mm group. (p<0.05) In conclusion, within the limits of the results of this experiment, the 3 mm depth of System B Plugger tip was acceptable for obturating the Type IV canal.

• Information and Communications Magazine
• /
• v.24 no.7
• /
• pp.26-35
• /
• 2007

최근 몇 년간 유비쿼터스 서비스를 구현하기 위한 핵심 기술 중 하나인 무선 센서 네트워크에 대한 관심이 높아지고 있다. 무선 센서 네트워크 기술은 물류, 유통, 환경 감시, 홈오토메이션, 군사 분야 등 다양한 분야에 적용 될 수 있기 때문에 앞으로 관련 분야의 시장 또한 커질 것으로 예상되고 있다 [1]. 무선 센서 네트워크는 기존 유선 센서 네트워크나 무선 네트워크 환경과는 많은 차이를 가진다. 우선 극도로 제한된 시스템 자원만을 가질 수 있으며, 열악한 환경 속에서 무선매체를 통해 유기적으로 동작하여야 하는 특징을 가지고 있다. 적게는 수십 개에서 많게는 수백, 수천 개의 자율적인 하드웨어 노드들로 구성되는 무선 센서 네트워크에서 제한된 자원을 효과적으로 활용하기 위해서는 센서 노드에 적합한 운영체제가 필수적으로 요구된다. 지난 몇 년간 센서 노드하드웨어의 발달과 더불어 많은 센서 네트워크용 초소형 운영체제가 개발되어왔다. 현재 많이 알려져 있는 센서 네트워크용 OS로는, 가장 활발한 참여를 보이고 있는 TinyOS[3]부터 SOS[4], MANTIS[5], Contiki[6], T-kernel[7] 등이 있으며, 국내 기술로 개발된 Nano-Qplus[8] 등이 존재한다. 본고에서는 우선 센서 네트워크에 대한 배경 지식과 플랫폼 등에 대한 내용을 간단히 다루고, 본론에서 센서 네트워크용 운영체제가 가져야 할 조건과 현재 개발되어 있는 센서 네트워크 OS들의 특징에 대해 간략히 살펴보도록 하겠다. 또한 센서 네트워크 OS와 밀접한 연관성을 가지는 분야에 대해 간단히 살펴보고, 마지막으로 앞으로의 방향에 대해 알아본다.고려해 볼 때 atlas의 장축의 시계방향 회전은 액티베이터의 사용 효과로 생각되며, 이는 차후 II급 부정교합자에서 액티베이터 치료 효과를 판단하는 또 하나의 지표가 될 수 있다고 생각한다.인해 한반도를 포함한 동아시아 대륙이 태평양판 쪽으로 밀려감으로써 섭입하던 태평양판의 각도가 급해져 동아시아 연변에 강력한 흡입력이 발생하였으며, 이 때문에 태평양판의 운동 방향이 북북서에서 서북서방향으로 회전되었을 가능성이 있다. 따라서 약 51 Ma부터 한반도 동남부에는 지판 경계의 강력한 흡입력으로 동서 내지 서북서-동남동의 인장력이 작동되어 B그룹 암맥군이 관입한 것으로 해석된다.Ledge는 세 군 모두에서 나타나지 않았다. 4. 파일 binding 횟수는 MC군이 가장 적고 PT군이 가장 많았다 (p < 0.05). 이상의 결과를 볼 때, Mtwo 전동 파일을 crown-down technique으로 사용하는 것이 single length technique과 유사한 성형 효율을 보이면서도 더 안전할 것으로 추정된다.고 1명(3%)에서 원격전이를 보였다. 치료 중 급성 합병증으로 11명(37%)에서 RTOG grade 1-2의 장염을 보였으며 1명은 대장의 천공이 발생하여 수술로 치유되었다. 12명(40%)에서 RTOG grade 1-2의 급성 방광염을 보였다. 3명(10%)에서 RTOG grade 1-2의 백혈구 감소증이 보였으며 1명에서 심한 백혈구 감소증(RTOG grade 4)이 나타났으나 회복되어 치료를 완료하였다. 만성 합병증으로 5명(15%)에서 RTOG grade 1-2의 만성 장염을 보였으며 별다른 치료 없이 지내고 있으며

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2012

The effect of the packing methods for enhancing the shelf life and improving the postharvest quality of the $tah$ $tasai$ Chinese cabbage baby leaf vegetable was studied during storage. Fresh baby leaf vegetables were packed in four commercial packaging types: (1) a non-perforated bag with a 0.03-mm oriented polypropylene (OPP) film; (2) a perforated bag with 1.0-mm-diameter holes on an OPP film; (3) a 0.40-mm polyethylene terephthalate (PET) container with a hinged lid; and (4) an expanded polystyrene (EPS) tray wrapped with a 0.02-mm polyvinyl chloride (PVC) film. The quality parameters, such as the weight loss, moisture content change, color difference, and appearance of the baby leaf vegetables were investigated. The baby leaf vegetables in the PET container and in the non-perforated OPP film bag showed relatively low weight loss, high moisture content, and good external appearance compared to those in the EPS tray and in the perforated OPP film bag during limited storage periods, at $16^{\circ}C$. The PET container also protected the baby leaf vegetables from physical damage. The study results will enable the selection of a better packaging system for extending the freshness and increasing the market ability of baby leaf vegetables.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.900-913
• /
• 1998

Despite of technical difficulties, the combination of occlusal projection and densitometric digital analysis may ultimately provide a means of detection of subtle bone loss at the facial and lingual side of dental implant (Oblique occlusal view is more useful for $ITI^{(R)}$ dental implant due to its contour of shoulder as like tulip flower). In this study, conventional periapical projections of x-ray beam had shown more high sensitivity to detect the bony defects than oblique occlusal projections in alveolar crest obscured by dental implants or not, even if the difference was not statistically significant. Unlike conventional periapical projections. occusal projections combined with densitometric digital analysis technique may provide a means for detection of subtle bone change at the all around of implants without obscuring effect by implant itself. Although the results from this in vitro study were performed under limited circumstances, these results might afford more possibility and versatile modality of diagnosis options to clinician in the implant practice.

• Clinical and Experimental Pediatrics
• /
• v.52 no.1
• /
• pp.56-60
• /
• 2009

Purpose : This study aimed to test whether rotavirus-associated necrotizing enterocolitis (RV+NEC) produced different clinical findings or outcomes from those of non-rotavirus necrotizing enterocolitis (RV-NEC). Methods : Eight patients from the RV+NEC group and 22 patients from the RV-NEC group diagnosed with modified Bell stage II or higher NEC were selected for this study. Fecal specimens from all infants were tested for rotavirus infection using a monoclonal antibody-based enzyme immunoassay (EIA). Clinical, radiographic, and clinical outcome data were analyzed retrospectively. Results : RV+NEC infants had a significantly higher birth weight and were born at a significantly higher gestational age ($33.5{\pm}3.3$ weeks vs. $29.3{\pm}4.4$ weeks; P=0.01). There were no differences in the occurrence of thrombocytopenia, mural gas, and pneumoperitoneum between the 2 groups. However, portal vein gas was more common in the RV+NEC group (88% vs. 9%; P<0.01). Neither the incidence of Bell stage III (or higher) NEC nor surgical intervention differed between the two groups. The number of complications and mortality rates were also similar. Conclusion : Rotavirus-associated NEC occurs in infants with a higher birth weight and those born at a greater gestational age. However, the severity of the condition and the resulting outcomes did not differ from those for infants affected by non-rotavirus NEC.

• Explosives and Blasting
• /
• v.26 no.2
• /
• pp.64-76
• /
• 2008

Bulk Emulsion blasts using mechanized charging system, which is generally used in foreign countries, have recently introduced and gradually increased in Korea. The Bulk Emulsion are safe and able to increase the charging density for improvement of fragmentation and advancement especially in tunneling, and minimizing environmental problem. Because of less toxic gas generation, the explosives are called, namely ech-friendly products. There are two kinds of Bulk Emulsion; one is for open cut and the other is for tunneling. According to features of blast sites and its purpose, the compositions are different, but the principle is the same. In this study, trial blasts using Bulk Emulsion for tunneling had executed at 10 sites in Korea. The major result of the major job-sites is the following. First of all, compared with cartridge explosive, Bulk Emulsion was able to increase its charging density up to $35{\sim}60%$, to decrease the blast holes to approximately $10{\sim}30%$ down, and the advancement was improved up to $8{\sim}20%$ and also 30% up in its fragmentation. Toxic gas production after cartridge blasting showed 34.44ppm of its CO. Bulk Emulsion, however, showed 20.13ppm, which was 58.45% production of the cartridge explosive, and NOx was below 2ppm. The mechanized charging system of Bulk Emulsion should be applied to large sized tunnel blasting, long advanced tunnel which can secure the advancement of over $4{\sim}5m$, and the sites required finishing rapidly.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.363-375
• /
• 1997

This study encompasses the performance of static and fatigue test for the 8 large scale test specimens to clarify the fatigue behavior of coped stringer and the effect of the repair and strengthening on the damaged stringer of the floor system in steel railway bridges. For the purpose of the research, the actual stress wave for the existing bridge was measured, the basic stress range frequency histogram was made and the equivalent stress range was calculated. Using the result from the equivalent stress range made by adjusting the stress range, the static and fatigue test was carried out by identifying the previous rehabilitation and after. As the result of the static tests, it was revealed that the level of local stress under the S1 specimen test of the real equivalent stress range was similar to tensile strength of the test material, and it was consistent with the requirement of the initiation condition of the fatigue crack. Through the various rehabilitation methods to the damaged specimens, the effects of the repair and reinforcement were analyzed. According to the results of the repair of effect, bolting the high tension bolt over the stop hole was confirmed to be more adequate method than drilling only stop hole to delay the fatigue crack growth. Futhermore, in case of the stringer subjected by bending moment, the reinforcement over the upper flange side was determined to be a useful strengthening method, and the reinforcement to the web of the stringer was not appropriate to accomodate as a adequate strengthening method. Also it was confirmed that the category of the fatigue design for the coped stringer met with the category E specified on the fatigue design criteria of the Highway Standard Specification in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.15-20
• /
• 2011

The pine wilt disease is one of the most serious forest diseases that kill the pine trees, and the study on the invasion and movement of the pine wood nematode within the tree is very important for understanding the inhabitation of pine wood nematode. In this relation, the microscopic observation was carried out to study the place of inhabitation and movement of pine wood nematode within the infested wood. In result, the rays were mainly infested by pine wood nematode and showed dark discoloration due to their necrosis in cross, radial and tangential surface. Also, the intensive damage was found in the resin canals. On the other hand, some traumatic resin canals in tangential band were identified in the sapwood near the cambium. In the ray, the pine wood nematode occurred more commonly in the ray parenchyma cell and fusiform ray with horizontal resin canal than in the ray tracheid and uniseriate ray without horizontal resin canal, respectively. The pine wood nematode was thought to move from ray to tracheid through the large natural opening, window-like pit, in the cross-field, neither through the small natural opening, bordered pit, in the tracheid nor through the tracheid wall by creating a bore hole.