• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.195-200
• /
• 1998

Purpose: When an elongated x-ray field is used for treating a patient, the equivalent- field method is commonly used for the output calculation. This study is intended for investigating potential factors such as, beam quality, field elongation ratio, and depth of measurement, which might effect on the applicability of the equivalent square technique for output calculation. The derivation of a 'rule of thumb' for the application criteria of the equivalent-field method is also aimed. Materials and Methods: Three x-ray beams, 4-, 6- and 10-MV, were employed for this study. Width of the rectangular field was ranged from 5-40 cm and the elongation ratio (length/width) 1:0 to 10:0. An elongation effect was measured in a water phantom at three different depths, dmax, 5-cm, and 10-cm. For an elongated field and its equivalent square field, the output factor was measured and the difference in the output factor were examined between two fields. Results and Discussions: As the elongation ratio increases, a larger discrepancy in outputs is observed between the elongated rectangular field and its corresponding equivalent square field. Output was measured larger for an elongated field than for its corresponding equivalent square field and the maximal difference over 10 % was found. The difference was found larger for the smaller field with the same elongation ratio. The effect of the beam quality and the depth of measurement on the output difference was minimal. Conclusion: Based on the study, there is criteria for the application of the method for output calculation. For the combination of long axis and elongation ratio whose relationship satisfies Elongation ratio < (0.48) (Long axis) - 0.5, the equivalent-field method is valid for output calculation within 2 % for the field whose long axis < 25-cm. For other combinations, instead of using the equivalent-field method, direct output measurement is recommended. This criteria can be applied for 4-10 MV x-ray beams up to 10-cm depth.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.176-191
• /
• 2009

This report is a result of investigating the materials and techniques of the lacquer ware excavated from Hwangnamdaechong Tomb known as an old tomb in the Gyeongju maximum district. First, the fragment of lacquer ware was classified by the shape of it. Next, the thin section of lacquer film (all sides about 2mm) was made based on the result. Then they were observed under the microscope, and classified the kind of the foundation mixture and the applied structure. It is a result as follows. 1 The bone dust was mixed by the foundation of the made of cloth-body lacquer ware such as eared lacquer cup, lacquer bowl, and the lacquer rectangular containers excavated from the south tomb. 2 Eared lacquer cup and lacquer bowl, and rectangular box excavated from south and north tomb had the possibility they were the set of articles partially of tableware and the cosmetic box. 3 There is a difference in the quality of burial lacquer ware between in south tomb and north tomb. A lot of highlevel lacquer ware such as eared lacquer cup, lacquer bowl and the rectangular lacquer containers were discovered from the south tomb. 4 Many of containers where animal and bird had been drawn on the black lacquered ground excavated from north tomb were wooden bath.

• Applied Microscopy
• /
• v.37 no.2
• /
• pp.83-91
• /
• 2007

The present study examined the epidermal changes of adhesive disks which occur during attachment in Parthenocissus tricuspidata using scanning and transmission electron microscopy. Several adhesive disks, each covered with a bract, develop from the shoot apical meristem during early development. In the initial stage, the adhesive disks are club-shaped and their upper and lower epidermis are indistinguishable. However, in the actively growing stage, they become spherical and both epidermis are clearly differentiated into the adventitious roots. Prior to wall attachment, the adhesive disks exhibit adaxial convex and abaxial concave shapes, and electron-dense substances are abundant in the vacuoles of epidermal cells. The peripheral area of the adhesive disk is adhered first to the wall surface, while the central area is drawn inward in a vacuum-like state during attachment. As the attachment progresses and the electron-dense substances continue to discharge, the upper and lower epidermis rapidly undergo deterioration and the disks shrink considerably. At this stage, structural changes of the lower epidermis occur much faster than in the upper one. The discharged substance is accumulated on the wall surface, and this aids the attachment of adhesive disks on the wall for long periods. In this manner, the shape and structure of the adhesive disk epidermis change drastically from initial growth to the mature stage. Further, the role of electron-dense substance and shrinkage of the disk during attachment has been discussed in Parthenocissus tricuspidata.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.5-16
• /
• 1999

본 연구의 목적은 Navajo 직물의 역사적 발달을 고전시대를 중심으로 살펴보고 특히 외부영향에 따른 직물의 변화를 고찰하는데 있다. 구체적으로 1) 고전시대의 전통적인 직물은 어떻게 발달하였는가\ulcorner 2) 고전시대 직물의 전통적 요소와 외부영향요인은 어떤 점이 다른가\ulcorner 예 초점을 맞추었다. 연구방법은 아메리카 인디언의 이동,문화 Navajo 직조 및 직물에 대한 문헌을 바탕을 조사하였고 아리조나 주립박물과 아리조나 역사 박물관을 방문하였으며 박물관 안에 있는 전문가들의 조언을 듣고 연구의 자료를 보완하였다. 또 비교 미학적 차원에서 고전시대 navajo 직물의 전통적 요소와 외부영향 요인을 분석하였고 외부영향을 받은 직물의 예를 시각적자료로 제시하였다. 이연구는 인디언직물에 대한 이해, 고전시대. Navajo 직물의 문헌고찰을 통한 민족의복의 문화적측면에 기여할수 이고 현대적 감각을 지닌 Navajo 직물을 한국직물에 접목 응용하는데 도움을 줄수 있다 본 연구의 결과는 다음과 같다. 1. Navajo 직물을 고전, 전환, 양탄자 시대로 구분되었고. 이중에서 고전시대가 navajo 직물의 특성을 가장 잘 나타내었으며 발달된 직조기술을 보였다. Navajo인들의 직조기술은 1863년경 최고조에 달했다. Navajo 직물의 디자인 주제로 주로 인간을 둘러싸고 있는 환경에서 얻어졌고 이것들은 직선의 기하학적 형태로 구체화되었다. 또한 직물에 표현된 색도 자연과 밀접한 관련성을 갖는 있었다. 2. Navajo 직물의 주용한 용도는 여성용 드레스, 남성용 셔츠는 어깨에 걸치는 두르개였다. 여성용 드레스는 동일한 크기의 직물의 두장을 직조한 후에 꿰매었고 남성용 셔츠는 머리가 들어갈수 있는 구멍이 있는 장방형 판쵸 스타일이었다. 어깨에 걸치는 두르개는 여성의 경우 가운데가 검은색이고 가장자리가 푸른색인형태오 흰색과 붉은 색이 교대로 나타나는 형태의 2가지가 있었고 남성용은 고전시대의 대표라고 일컬어지는 족장 두르개였다. 3. Navajo 직물은 외부의 영향을 받아 많은 변화를 가져왔다. 즉 스페인 사람들로 인하여 면 섬유대신 양모섬유를 사용하게 되었고 전통적 모양과 다른직물이 출현하게 되었다. 또한 인디고 염류, 색소니 실, 바에타 직물의 도입으로 다양한 색상의 표현이 가능해졌고 이와 관련하여 다이아몬드 십자형 톱니형 무늬드이 나타나게 되었다. 4, 고전시대를 대표하는 직물로 족장 두르개, 쇼올, 안장덮개를 들수 있으며 이 직물들에서 뚜렷하게 외부영향 요인을볼수 있다. 즉 족장 두르개의 가장 정교한 단계에서 다이아몬드 무늬가 가장가리 가운데 모서리에 위치하여 9지점 배치를 이룬 것 쇼올의 경우 폭보다 길이가 긴 형태의 비전통적 모습을 나타낸 것 안장덮개에서 보여지는 여덟포인트 별 무늬도 외부의 영향을 받은예이다. 뛰어난 직조기술로 유명한 navajo인들은 변화에 잘 적응하는 특성을 갖고 있었다. 외부의 영향을 그들은 긍정적으로 받아들였고 자기 자신들의 필요에 맞도록 수정하여 정체감을 잃지 않으면서도 문화를 발전시켰다. 따라서 고전시대의 Navajo 직물은 고유적 요인과 외래적 요인의 조화를잘 나타내고 있으며 디자인의 탁월함이 세련됨 천연염료와 인조염료의 배\ulcorner에 의한 색상의 우월성 등으로 오늘까지 높이 평가되고있다.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.38-55
• /
• 2019

At Otani University in Kyoto, Japan, there is a rubbed copy of Tripitaka Koreana, presumably printed in 1381. According to the postscript of the copy, written by Saek Lee himself, the rubbed copy was made at Haeinsa temple in 1381 and was kept at Sinluksa temple in Yeuju. The copy was delivered as a gift to Japan in 1414 and now is kept at the Library of Otani University. Although an approximate summary of the content of the copy was reported in the early 2000s after a basic survey, details of the copy, including the concrete format and packaging paper, are not known yet. In this paper a detailed survey of the copy is conducted on the 109 pages. The copy is divided into two parts: the wrapping and the inner pages. The wrapping paper is divided into yellow and brown colors depending on the material of the paper. The yellow colorwrapping paper was possibly made in 1381 at the time of the rubbed printing, and the brown wrapping paper was repaired after being moved to Japan. Using funds collected in February 1380, the copy of Gyeong(經), Yul(律), and Ron(論) chapters was printed in April 1381. Binding of the copy was completed in September, and the wrapping paper with the title in gold was made in October 1380. The box for keeping Buddhist scriptures was manufactured in November 1380. The copy was moved to Sinluksa temple in April 1382 and delivered to Japan in 1414. At Otani University, the copy is stored in separate rectangular boxes 32.1×25.3cm in size with a height of 23.6cm. The rectangular plate on the four sides is red in external color but black colorinside. The box for keeping Buddhist scriptures was probably made in 1381, but a partial repair was made later. Because of the difficulty of executing a detailed survey of the box for Buddhist scriptures, it is hard to find out its nation and period of production. We look forward to studying the copy as well as the box for Buddhist scriptures in future.

• Korean Journal of Weed Science
• /
• v.2 no.2
• /
• pp.75-113
• /
• 1982

Studies were carried out 1) to define the shape and size of sampling quadrat and its number of observations for weed experiments, 2) to characterize the growth and community of major summer weeds under upland condition and 3) to investigate the factors influencing competition between weeds and soybeans under weed-free and weedy conditions in early and late season cultures. No significant difference was noted among different shapes of quadrat (regular, rectangular, band, and circular) in the sampling efficiency of weeds. The results also suggested that the minimum size of quadrat was 0.25$m^2$ and the minimum number of replication was 2 times per plot. The major dominant weeds were about 10 species in the experimental field and the total number of weeds was in the range of 70 - 1,600 plants per $m^2$. Among the weeds Digitaria sanguinalis and Portulaca oleracea were the most dominant species. Growth amount and reproduction capability were also measured by weed species. Five different weed communities were identified in the field. The degree of dispersion by weed species and association among weeds were investigated. Intra-(within soybeans) and inter-specific (between soybeans and weeds) competition were studied in early and late season cultures of soybeans. The average yield of soybeans per plant was significantly decreased in both season cultures due to intra-specific competition as the planting density of soybeans increased, On the other hand, the average yield of soybeans per l0a was proportionally increased to the increase of planting density and the rate of its increase was more significant under weedy than weed-free condition. Most of the agronomic characteristics of soybeans were affected by weeds and its degree was greater in sparse planting than in dense planting and in early season than in late-season culture. Digitaria sanguinalis was the most competitive to soybeans in early season and both of Digitaria sanguinalis and Portulaca oleracea affected primarily the growth of soybeans in late season with about the same competitiveness. The occurrence of weeds was significantly decreased in early season and slightly decreased in late-season by dense planting of soybeans. The total growth amount of weeds was also considerably decreased by increase of soybean planting density both in early- and late-season cultures. The occurrence of Digitaria sanguinalis which was the most dominant in both seasons, and its growth amount was significantly decreased as the planting density of soybean was increased. On the other hand, the occurrence of Portulaca oleracea which was only dominant in late-season culture did not show significant response to the planting density of soybeans.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.178-199
• /
• 2011

The ancient tombs found in Bokcheon-dong, Busan originate from the time between the $4^{th}$ and $5^{th}$ centuries, the period of the Three Nations. They are known as the tombs where the Vertical Plate Armour was mainly buried. In 2006, two units of the Vertical Plate Armour were additionally investigated in the tombs No.164 and No.165 which had been constructed at the end of the eastern slope near the hill of the group of ancient tombs in Bokcheon-dong. Throughout this study, the contents of the two units of the Vertical Plate Armour, whose preservation process has been completed, have been arranged, while the group of constructed ancient tombs in Bokcheon-dong from the $4^{th}$ century has been observed through the consideration of the burial pattern. The units of the Vertical Plate Armour from the tombs No.164 and No.165 can be classified as the IIa-typed armor showing the Gyeongju and Ulsan patterns, according to the attribute of the manufacturing technology. Also, they can be chronologically recorded as those from the early period of Stage II among the three stages regarding the chronological recording of the Vertical Plate Armour. While more than two units of the Vertical Plate Armour were buried in the largesized tomb on the top of the hill of the group of ancient tombs, one unit of the Vertical Plate Armour was buried in the small-sized tomb. By considering such a trend, it can be said that in the stage of burying the armor showing the Gyeongju and Ulsan patterns (I-type and IIa-type), different units of the Vertical Plate Armour were buried according to the size of the tomb. However, as the armor showing the Busan pattern (IIb-type) was settled, only one unit was buried. Meanwhile, the tombs No.164 and No.165 can be included in the wooden chamber tomb showing the Gyeongju pattern, which is a slender rectangular wooden chamber tomb with the aspect ratio of more than 1:3. However, according to the trend shown by the buried earthenware, it can be said that there seem to be common types and patterns shared with the earthenware which has been found in the area of Gimhae and is called the one showing the Geumgwan Gaya pattern. In other words, there seem to be close relationships between the subject tombs and the tomb No.3 in Gujeong-dong and the tomb No.55 in Sara-ri, Gyeongju, regarding the types of armor and tombs and the arrangement of buried artifacts. However, the buried earthenware shows a relationship with the areas of Busan and Gimhae. By considering the combined trend of the Gyeongju and Gimhae elements found in one tomb, it is possible to assume that the group of constructed ancient tombs in Bokcheon-dong used to be actively related with both areas. It has been thought that the Vertical Plate Armour used to be the exclusive property of the upper hierarchy until now, since it was buried in the large-sized tomb located on the top of the hill of the group of ancient tombs in Bokcheondong. However, as shown in case of the tombs No.164 and No.165, it has been verified that the Vertical Plate Armour was also buried in the small-sized tomb in terms of such factors as locations, sizes, the amount of buried artifacts and the qualitative aspect. Therefore, it is impossible to discuss the hierarchical characteristic of the tomb just based on the buried units of the Vertical Plate Armour. Also, it is difficult to assume that armor used to symbolize the domination of the military forces. The hierarchical characteristic of the group of constructed ancient tombs in Bokcheon-dong from the $4^{th}$ century can be verified according to the location and size of each tomb. As are sult, the re seem to be some differences regarding the buried units of the vertical plate armour. However, it would be necessary to carry out amore multilateral examination in order to find out whether the burial of the vertical plate armour could be regarded as the artifact which symbolizes the status or class of the deceased.