• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.2
• /
• pp.33-37
• /
• 2016

One-way degassing valves usually designed for coffee packaging are recently applied to the various food packaging such as fermented health functional food or home meal replacement (HMR) packaging. The optimized degassing pressure by food product is important factor for keeping effective freshness and improving preservation of the food, therefore the development of degassing valves specified with various open pressure is needed. In this study, the mechanical characteristics of the degassing valve with ring type rubber disk were analyzed and a mathematical model was developed to predict the open pressure of the valve. The model was verified with test results derived from several available valves, and it may be useful in designing and developing a new valve.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.347-352
• /
• 2010

Under harsh environments in which remote control is impossible, wire-guided control technology is effective for controlling distant underwater vehicles that serve mother ships in missions, such as exploration and installation. When the fiber is unwound from the spool, tension fluctuations occur in the fiber because of the relative velocity of the moving vehicles and unwinding velocity of the fiber. As a result, fiber cables exhibit complicated behaviors, become entangled, and may get cut. In this study, a spool-like design for winding tens of kilometers of fiber cables is proposed by analyzing cable winding. The unwinding performance of the designed spool is estimated by performing nonlinear dynamics analysis of the nonlinear behavior and tension fluctuations observed during the unwinding of the fiber.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.39-44
• /
• 2016

Recently, there has been increasing concern regarding the collapse of hydraulic structures due to abnormal climate conditions. Therefore, numerous studies of the collapse of hydraulic structures have been carried out. In particular, the velocity of the propagation of a flood wave-front is important for predicting the inundation safety and establishing an EAP (Emergency Action Plan). Although many hydraulic tests have been conducted for precise predictions of a flood wave-front, the scale effect from downsizing has not considered. In this study, the relationships between surface tension and the concentration of surfactant, between surface tension and the velocity of flood wave propagation, and between surface tension and the Weber Number were derived through hydraulic tests using a surfactant and image analysis equipment. Based on these relations, the modification factor for the scale effect of the front of flood wave propagation was suggested. The results highlight the necessity of a modification factor when the Weber Number is lower than 12.2, but the scale effect can be ignored when the Weber Number over 12.2.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.133-139
• /
• 1997

The noise generated from a treadband mechanism of a tire has been the subject of this research. In particular, the treadband has been treated as an infinite tensioned beam resting on an elastic foundation which includes damping. The main objective is to predict the sound power generated from a system mentioned above by locating harmonic point forces representing the excitation of treadband at the contact patch. It is possible to predict the sound power radiated from this structure by using wavenumber transformation techniques. In order to find out the minimum radiated sound power, All parameters were varied. Thus, this model can be used as a tire design guide for selecting parameters which produces the minimum noise radiation.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.396-403
• /
• 2014

This paper considered the prediction of the tension force in the design of a TLP tendon, particularly focusing on the springing problem. Springing is an important parameter that exerts a large tension in special cases. It is a nonlinear phenomenon and requires the 2nd-order wave loads to solve. In this paper, a new prediction method for springing and the resultant extreme tension on the tendon of a TLP is introduced. Using the 2nd-order response function computed using the commercial program WADAM, the probability density function of the 2nd-order tension is obtained from an eigenvalue analysis using a quadratic transfer function and sea spectra. A new method is then suggested to predict the extreme tension loads with respect to the number of occurrences. It is shown that the PDF suggested in this study properly predicts the extreme tension in comparison with the time histories of the 2nd-order tension. The expected tension force is larger than that from a linear analysis in the same time windows. This supports the use of the present method to predict the tension due to springing.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.210-216
• /
• 1979

A simple method to calculate the interfacial tension between two immiscible molten polymers has been developed. The theory is based on the significant structure theory of liquids. The energy of adhesion is expressed as a geometric mean of the cohesion energies multiplied by correction factor $({\Phi}12)$, ${\Delta}E_{12}={\Phi}_{12}\sqrt{{\Delta}E_{11}{\Delta}E_{22^{\circ}}$. In the calculation of ${\Delta}E_{11}\;and\;{\Delta}E_{22}$, a quasilattice of polymer chains has been assumed. It is assured that, besides the dispersion force, the polar force interactions between polymer constituent groups should be considered in the calculation of the interfacial tensions.

• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.85-92
• /
• 1993

수지이동 성형공정에서 수지가 섬유직조망에 함침될 때의 투과계수와 수지의 표면 장력으로 인하여 유동진전면에서 발생하는 모세관압을 실험적으로 측정하였다. 두 종류의 섬유조직망에 대해서 가공율이 증가함에 따라투과계수는 증가한다. 수지, 섬유 그리고 공기 가 서로 다른 세 개의 상을 구성함으로써 수지의 표면장력의 영향을 받는 비정상상태의 투 과계수가 수지의 섬유직조망에 포화된 정상상태에서 측정된 투과계수보다 본 실험에서 수행 된 모든 기공을 범위에서 크다는 것을 보여주었다. 수지 유동진전면에서 발생되는 모세관압 은 기공율이 감소함에 따라 증가하였고 섬유직 조망의 기공율이 0.469인 경우에는 금형입구 에서의 수지주입압력의 25%에 해당되는 모세관압이 발생되는 것으로 나타났다. 따라서 모 세관압을 가공조건으로 고려해다 한다는 것을 제시할수 있었다. 또한 본연구에서 사용된 임 의 배향 섬유직조망에 대해 실리콘 오일과 유리섬유 계면의 동적접촉각 측정을 통하여 섬유 배향 및 기공의 분포를 나타내는 형상인자의 값을 구함으로써 실제 RTM 공정에서 발생되 는 모세관압을 예측할 수 dLT는 기초자료를 제시하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.293-294
• /
• 2003

최근 다양화된 합섬소재의 등장으로 인해 원사가 다양화되고 그에 따른 가공기술 등의 공정이 복잡해짐에 따라 이들 소재의 기본이 되는 원사의 물성은 여러 공정들을 거치게 되면서 그 역학적 물성들이 변화하게 된다. 원사이후의 공정 특히 사가공 공정에서의 공정에 따른 絲의 물성을 파악하는 것은 직물의 물성 예측에 중요하다. 원사를 가공하는 공정 중 Belt type의 가연기구는 絲손상이 크고 가연 torque가 크며 특히 belt spped의 변화에 의해 적당한 장력이 선정되기 때문에 Pin type과 frictin disk type에서 설정 불가능한 낮은 T$_2$(Untwisting Tension) 장력범위의 가공도 가능하여 부가가치가 높은 絲의 가공이 가능하다. (중략)

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.146-151
• /
• 1992

In this paper, extreme tensions in a snapping cable are studied and systematic parameter studies are made in the selected cable using the clipping-off model. The anticipation of incipient clipping frequencies of a cable are of use in giving an indication of the behavior of cables for marine applications in which large dynamic tension build-up in rough seas may cause the total tension to become negative.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.286-286
• /
• 2023

물의 전체 순환 구조에서 토양수분이 차지하는 정량적 비중은 상대적으로 작지만, 강우-유출 과정의 비선형에 영향을 미치는 지배적 요인 중 하나이고, 토양 침식과 산사태, 농업생산량, 기후 변화 대응 등 광범위한 주제와 연관되어 있어, 토양수분의 물리과정에 대한 이해 증진과 예측 기술의 지속적인 개선이 필요하다. 본 연구에서는 금오공과대학교 유역 내에서 토양수분과 기상 요소를 실시간 관측하고, 기계학습 기법을 이용하여 토양수분을 단기 예측하는 기술을 개발하고 평가한다. 구체적으로는, 토양 관측 장비인 TEROS를 사용하여 표층 지점의 10cm, 심층 지점의 40cm에서의 토양수분, 토양장력과 토양온도를, 기상 관측 장비인 ATMOS를 사용하여 태양복사, 강수량, 기온, 풍속, 대기압 등 다양한 기상 요소를, 실시간 클라우드 방식으로 1여 년간 수집한 데이터를 활용한다. 또한, 과거 및 실시간 데이터를 기반으로 LSTM(Long-Short Term Memory) 기법을 사용하여 토양수분 예측 모형을 구축하고, 선행 예측 시간에 따른 모의 정확도를 평가한다. 기상 요소의 누적 등 자료 분석 방법이 표층 및 심층 토양수분 예측에 미치는 영향, 그리고 예측 모형 개선 방향에 대해 토의한다. 실시간 현장 관측 자료 및 인공지능 기반 단기 토양수분 예측 모의 기술은 소규모 유역의 수문순환 분석 및 물리기반 모형의 개선 등 다양한 분야에서 활용할 수 있을 것으로 기대된다.