• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.663-669
• /
• 2009

In the electrical railway, the increase of tensions in an overhead contact lines is essential to speed-up of train, because current collection quality largely depends on the ratio of a wave propagation speed to a train speed. For Kyungbu high-speed line, a pulley-type tensioning device is required to have a tension variation of maximum 3%. Therefore we developed a pulley-type tensioning device in order to meet tension variation requirement of the high-speed tensioning device. To verify the performance of the developed device, a performance test, overload test and failure test were carried out according to the factory test procedure of the Kyung-Bu High-speed line. Furthermore, we also performed reliability performance through not only a fatigue test in a factory, but also on-line verification test in Chungbuk line for over 1 year. These tests verified that the tensioning device had applicability to a main line.

• Railway Journal
• /
• v.14 no.5
• /
• pp.19-25
• /
• 2011

• Railway Journal
• /
• v.15 no.2
• /
• pp.4-8
• /
• 2012

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.772-777
• /
• 2006

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.383-388
• /
• 2020

This study aimed to identify the influence of the power components of the ammunition vehicle on the maximum speed. The maximum speeds of the engine and transmission changes were 3% and 1.7%, respectively. In the case of strong tension based on the track tension, the decrease was 4.6%. A 1.5% increase was obtained when the tension was weak. An examination of the maximum speed by dividing the track tension into six sections revealed the maximum speed to be highest when it was maintained below the middle. Experiments were performed by varying the orbital tension on both sides of the equipment. The maximum speed of the machine was affected by a large part of the tension. The maximum speed test was conducted by adjusting the tension at the driving test site. The results showed that when the tension was strong, the speed was 16.7% higher than the standard requirement. The speed was 28.3% at low tension. The influence of the maximum speed on the track tension was confirmed; the effect was greater than replacing the large parts.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.856-861
• /
• 2005

This paper presents an introduction and economical efficiency analysis of spring tension balancer in trolly wire system. In the overhead trolly wire systems, one of the most things is tension balancer. Because it can be automatically adjusted tension for expansion and contraction of overhead catenary system. In this paper, we introduced spring tension balancer and analyzed economical efficiency of it.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1328-1333
• /
• 2004

This paper presents a suggestion for improvement of tension balancer in trolly wire system. In the overhead trolly wire systems, one of the most things is tension balancer. Because it can be automatically adjusted tension for expansion and contraction of overhead catenary system. In this paper, we introduce and suggest spring tension balancer(STB).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.226-226
• /
• 2009

남북한 간의 전철 전력 설비의 연계 혹은 개량은 다양한 문제점이 발생이 가능하고 각종 기준 및 레벨의 차이가 심각하다. 따라서, 북한의 전기설비의 개량을 위한 전철 전력설비의 노후도 진단기술, 전압안전성 평가, 상호연계를 위한 시뮬레이션, 안전기준 마련등 광범위한 분야의 실용적 접근이 필요하다. 본 논문에서는 남북 및 대륙철도의 실용주의적 접근을 위하여 인프라 분야인 전철 분야의 표준화 방향에 대하여 기술하였다. 이를 위하여 북한 전철 설비의 전압, 지지물, 브래키트, 급전선, 조가선, 전차선, 장력조정장치, 조가방식, 전차선높이, 가고를 각각 분석 하였다.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.886-892
• /
• 2007

This paper presents examples of trolley wire resistance influential on the movement of tensioning devices. Therefore, this study is on the examples of trolley wire resistance which keep tensioning devices from working properly to the expansion and contraction in accordance with temperature change of overhead trolley wire system such as messenger wire and contact wire. Trolley wire resistance interrupts the working of tensioning device and drops the capacity of trolley wire. Reduced trolley wire capacity lowers the performance of current collection and has a bad effect on electrical train operation. So it is desirable to reduce the factors increasing trolley wire resistance to the minimum from the designing and construction stage of overhead trolley wire system. This study will introduce this problem and suggest the solution.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.723-730
• /
• 2006

In the electrical railway, the tension ascension of contact wire is essential to speed up of train and current collection performance of catenary largely depends on the tension. The tension variation rate of the tensioning device used in existing line limits within 5%, and the tension variation rate of the spring-type tensioning device installed at the section where tensioning length is short bounds within 15%. So it is urgent for us to localize it for high speed line, which the tension variation rate is limited within 3%. Therefore in this study, a pulley-type tensioning device for high speed line is developed. To verify the performance of developed device, a performance test, overload test and failure test is carried out under the code of the Kyung-Bu High Speed line. And it is secured durability performance through a fatigue test.