Browse > Article
http://dx.doi.org/10.5762/KAIS.2020.21.6.383

A Study on the Influence of Maximum Velocity on Track Tension Change to Military Ammunition Vehicle  

Noh, Sang Wan (Defense Agency for Technology and Quality)
Kim, Sung Hoon (Defense Agency for Technology and Quality)
Park, Young Min (Defense Agency for Technology and Quality)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.21, no.6, 2020 , pp. 383-388 More about this Journal
Abstract
This study aimed to identify the influence of the power components of the ammunition vehicle on the maximum speed. The maximum speeds of the engine and transmission changes were 3% and 1.7%, respectively. In the case of strong tension based on the track tension, the decrease was 4.6%. A 1.5% increase was obtained when the tension was weak. An examination of the maximum speed by dividing the track tension into six sections revealed the maximum speed to be highest when it was maintained below the middle. Experiments were performed by varying the orbital tension on both sides of the equipment. The maximum speed of the machine was affected by a large part of the tension. The maximum speed test was conducted by adjusting the tension at the driving test site. The results showed that when the tension was strong, the speed was 16.7% higher than the standard requirement. The speed was 28.3% at low tension. The influence of the maximum speed on the track tension was confirmed; the effect was greater than replacing the large parts.
Keywords
Track Tension; Maximum Speed; Engine; Transmission; Ammunition Vehicle;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 R. B. Na, B. H. Kim, J. S. Lee, "A Study on the Increase of the Reliability of the Flick Rammer on K-55A1 Self Propelled Artillery", Journal of the Korea Academia-Industrial Cooperation Society, Vol.19, No.9, pp.62-68, 2018. DOI: https://doi.org/10.5762/KAIS.2018.19.9.62   DOI
2 J. S. Lee, S. J. Kim, G. M. Bae, S. M. Kwon, H. J. Park, J. S. Choi "The Study on Design of Cirouit Card Assembly on Servo Control Unit for Automated Resupply Vehicle K56", Journal of the Korea Academia-Industrial Cooperation Society, Vol.20, No.12, pp.102-109, 2019. DOI: https://doi.org/10.5762/KAIS.2019.20.12.102   DOI
3 C. Y. Jung, J. M. Lee, J. Y. Lee, Y. K. Park, "Operational Effectiveness Analysis of Field Artillery Ammunition Support Vehicle for K-55 Self-Propelled aArtillery Using Simulation", The Korea Society for Simulation, Vol.20, No.3, pp.11-18, 2011. DOI: https://doi.org/10.9709/JKSS.2018.27.2.011
4 B. H. Lee, B. Y. Souh, "Dynamic Modeling and Analysis of a High Mobility Tracked Vehicle", Transactions of the Korean Society of Mechanical Engineers, A 30(11), pp.1486-1493, 2006.11.   DOI
5 K. S. Huh, B. H. Cho, M. S. Suh, I. S. Seo, D. C. Park, "Track Tension Monitoring in the Longitudinal Traveling of Tracked Vehicles", Transactions of the Korean Society of Mechanical Engineers, A 24(6), pp.1608-1615, 2000.6.
6 K. S. Huh, D. G. Hong, M. S. Suh, I. S. Suh, "Track Tension Estimation in Tracked Vehicles on Various Road Conditions", Transactions of the Korean Society of Mechanical Engineers, A 24(10), pp.2603-2609, 2000.10.
7 J. S. Seo, D. C. Kim, M. S. Seo, "Effort of Soil Properties on Velocity of Tracked Vehicle on Soft Ground", Transactions of the Korean Society of Automotive Engineers, pp.70-76, 1994.11.