• Journal of Trauma and Injury
• /
• v.22 no.1
• /
• pp.77-86
• /
• 2009

Purpose: The appropriate management of traumatic truncal arterial injury is often difficult to determine, particularly if the injury is associated with severe additional truncal lesions. The timing of repair is controversial when patients arrive alive at the hospital. Also, there is an argument about surgery versus stent-graft repair. This study's objective was to evaluate the appropriate method and the timing for treatment in cases of truncal abdominal injury associated with other abdominal lesions. Methods: The medical records at Ajou University Medical Center were reviewed for an 8-year period from January 1, 2001, to December 31, 2008. Twelve consecutive patients, who were diagnosed as having had a traumatic truncal arterial injury, were enrolled in our study. Patients who were dead before arriving at the hospital or were not associated with abdominal organ injury, were excluded. All patients involved were managed by using the ATLS (Advanced Trauma Life Support) guideline. Data on injury site, the timing and treatment method of repair, the overall complications, and the survival rate were collected and analyzed. Results: Every case showed a severe injury of more than 15 point on the ISS (injury severity score) scale. The male-to-female ratio was 9:3, and patients were 41 years old on the average. Sites of associated organ injury were the lung, spleen, bowel, liver, pelvic bone, kidney, heart, vertebra, pancreas, and diaphragm ordered from high frequency to lower frequency. There were 11 cases of surgery, and one case of conservative treatment. Two of the patients died after surgery for truncal organ injury: one from excessive bleeding after surgery and the other from multiple organ failure. Arterial injuries were diagnosed by using computed tomography in every case and 9 patients were treated by using an angiographic stent-graft repair. There were 3 patients whose vessels were normal on admission. Several weeks later, they were diagnosed as having a truncal arterial injury. Conclusion: In stable rupture of the truncal artery, initial conservative management is safe and allows management of the major associated lesions. Stent grafting of the truncal artery is a valuable therapeutic alternative to surgical repair, especially in patients considered to be a high risk for a conventional thoracotomy.

• Journal of Korean Society of Transportation
• /
• v.25 no.1 s.94
• /
• pp.93-105
• /
• 2007

To raise transit ridership, it is necessary to expand transit facilities in long term Plans and to raise passengers' satisfaction by improving bus service qualify in short term Plans. In this study, the relationship between bus driver job satisfaction and Passenger service Performance is analyzed. The results of the study indicate that a driver s job satisfaction has an influence on accident rates. However, even when job satisfaction is not very high, if food resting facilities and Policies ave Provided then the Probability of an accident tends to decrease. To improve job satisfaction, several things should be done, such as stabilizing employment, creating fair company policies, improving overall employee welfare, and enhancing driver achievement from working. The satisfaction from salary is also an important factor and drivers are satisfied when they earn more money relative to other companies' drivers and when they aye satisfied with their salary increases. Therefore, creating appropriate monetary incentives would be a food policy for improving bus driver job satisfaction. This study serves as pilot research to make a foundation for further research about job satisfaction in the public transit field.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.86-89
• /
• 2011

Purpose: The KOTRON-13 cyclotron was developed in South Korea and was introduced to regional cyclotron centers to produce short-lifetime medical radioisotopes. However, this cyclotron has limited capacity to produce carbon-11 isotope so far. We herein study how to develop and optimize an effective carbon-11 target system in the KOTRON-13 cyclotron by changing cooling system, combing with fluorine-18 target and evaluating beam currents. Materials and Method: To develop the optimal carbon-11 target and an effective cooling system, we designed the carbon-11 target system by Stopping and Range of Ions in Matter (SRIM) simulation program and considered the cavity pressure during irradiation at target grid. In this investigation, we evaluated the yield of carbon-11 production at different beam currents and the stability of the operation of the KOTRON-13 cyclotron. Results: The production of carbon-11 was enhanced from about 1.700 mCi ($50{\mu}A$) to 2,000 mCi ($60{\mu}A$) on the carbon-11 target which developed by seoul national university bundang hospital (SNUBH) and Samyoung Unitech. Additionally, the cooling condition was showed stable to produce carbon-11 under high beam current. Conclude: The carbon-11 target system of the KOTRON-13 cyclotron was successfully developed and improved carbon-11 production. Consequently, the operation of carbon-11 target system was highly effective and stable compare with other commercial cyclotrons. Our results are believed that this optimal carbon-11 target system will be helpful for the routine carbon-11 production in the KOTRON-13 cyclotron.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.159-165
• /
• 2018

The seed yield of summer plants is affected by climate change due to high temperature. High temperature during the reproductive growth period decrease pod, seed weight in soybean. This study was conducted at National Institute of Crop Science (NICS) during the growing season. The objective of this study was to determine the effect of high temperature on growth and seed yield responses of soybean varieties using a temperature gradient chamber (TGC). In 2017, the Daewonkong (DWK), Pungsannamulkong (PSNK), and Deapungkong (DPK) were grown in three TGCs. Four temperature treatments, Ta (near ambient temperature), Ta+1 (ambient temperature+$1^{\circ}C$), $Ta+2^{\circ}C$ (ambient temperature+$2^{\circ}C$), $Ta+3^{\circ}C$ (ambient temperature+$3^{\circ}C$), $Ta+4^{\circ}C$ (ambient temperature+$4^{\circ}C$), were established by dividing the rows along which the temperature gradient was created. In all three cultivars, beginning bloom (R1) delayed at elevated temperature in $Ta+4^{\circ}C$. In addition, the days to beginning of seed fill and maturity were longer under higher temperature. The numbers of pod, 100 seed weight, and seed yield increased at elevated temperature in DWK. In contrast, seed yield components of PSNK and DPK were reduced in $Ta+4^{\circ}C$. The results suggest that 100 seed weight and seed size of soybean was low by increased temperature in $Ta+4^{\circ}C$ of PSNK and DPK.

• Korean Journal of Pharmacognosy
• /
• v.48 no.4
• /
• pp.329-338
• /
• 2017

This study was investigated the changes of quality stability and physicochemical characteristics of the Korean red ginsengs stored for a long times over 20 years. The Korean red ginsengs were stored for 4 to 22 years in canned packaging with polypropylene film and wooden box at room temperatures. The unusal phenomena such as discoloration and pin hole in packaging were not observed. General bacteria showed the vlaues of below 100 CFU/g, coliform groups and molds were not found in any samples stored for 22 year. Any samples also were not detected in mycotoxins. The contents of moisture, ash and crude saponin were the levels of 10.6~11.1%, 3.8~4.2% and 4.1~4.7% during the whole storage periods, respectively. The contents of maltol, which has been known as characteristic flavour and antioxidant of Korean red ginseng, showed remarkably increasing tendency from 0.10 mg/g for 4 years to 2.53 mg/g for 22 years during the storage. The contents of AFG (arginyl-fructosyl-glucose), arginine and free sugar were slightly decreased. Acidic polysaccharide and ginsenoside were not changed significantly during the storage periods. The contents of acidic polysaccharide and total ginsenosides were the 75.1~76.3 mg/g and 15.1~16.6 mg/g, respectively. The sums of ginsenoside-Rg1,-Rb1 and -Rg3s were the ranges of 9.3~9.9 mg/g and PD (ginsenoside-Rb1, -Rb2,-Rc,-Rd,-Rg3s,-Rg3r)/PT (ginsenoside-Rg1,-Rg2,-Re,-Rf,-Rh1) saponin ratios were the levels of 1.4~1.5. These results suggest that Korean red ginsengs stored for long periods show relatively stable quaility stabilities and not significantly changed the contents of ginsenoside and polysaccharide during the storage up to 22 years.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.48-48
• /
• 2011

2010년 약 19.5 GWp 의 규모로 성장한 태양광 시장의 주요 소재는 실리콘을 이용한 태양전지이며, 고성능 및 고효율 태양전지 시장이 급성장 하였다. 이러한 고품질 태양전지에 사용되는 주요 원료인 9N 급 폴리실리콘은 2008년 4월 $265/kg 까지 상승하였으나, 점차 하향안정세에 있으며, 급속한 가격 경쟁을 통해 당분간 장기공급가가 50$/kg 이하로 하락할 것으로 전망된다. 이러한 실리콘 제조기술 중 가장 많이 사용되는 기술은 Trichloro-silane (TCS) 또는 Mono-silane (MS)를 사용하는 기상법인 일명 Siemens 공정이다. 이러한 기상법의 경우 12N 이상의 초고품질 실리콘 제조가 가능하나, 대규모의 설비투자(1억원/폴리실리콘 1톤)와 높은 에너지(120 kWh/kg)가 요구된다. 이에 최근 기상법이 아닌 야금학적인 정련법에 대한 기술이 개발되고 있으며, 이는 금속 실리콘을 슬래그 처리, 편석 분리, 응고 급랭, 전자빔, 플라즈마 등을 이용하여 정련하는 공정을 말한다. 야금학적 정련법은 순도 면에서 기상법에 비하여 낮은 단점이 있음에도 불구하고, 여러 장점들로 인해 활발히 연구되며 점차 실용화 되고 있는 매우 유용한 기술이다. 야금학적 정련법의 주요 장점은 기상법에 비해 약 25% 정도의 설비 투자비로 가능하고, 금속 실리콘을 직접 사용하며, 에너지 payback이 짧다. 또한, 산 및 염화실렌을 사용하지 않으므로 환경 문제를 적게 야기하고, 생산설비의 확장성도 매우 높다. 본 연구에서는 국내 규석광을 이용하여 일련의 정련 공정을 거쳐 고순도SG(Solar Grade)급 실리콘을 제조하고자 하였다. 실리콘 용융 환원로를 개발하고 순도를 높이기 위해 슬래그정련법을 이용하였으며, 생산된 3N 급의 금속 실리콘을 비기상법정련 방식인 일방향 응고와 플라즈마 정련 및 전자기유도 용해법을 이용하여 고순도의 실리콘을 제조하였다. 본 연구에서는 상업생산을 개시한 외국의 E사와 비교하여 산침출공정을 거치지 않으므로 실리콘회수율 및 환경부하 절감의 장점을 갖고 있으며 최종 순도 실리콘 6N 이상, 보론 함유량 0.2 ppm 이하를 달성하였으며, 기존 기상법 대비 약 20%의 전력 감소와 약 13%의 금속실리콘 원료 절감 효과가 있었다. 저가/고순도 SG급실리콘의 제조기술 개발은 향후 세계 태양광 시장에 대한 경쟁력을 확보하고, 시장 점유율 상승에 기여할 수 있으며, 산업 확대를 통한 주변 산업으로의 파급 효과가 매우 클 것으로 예상된다.

• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.143-152
• /
• 2009

Recent raw material prices fluctuation has been unexpectedly high and that made Korean economic activities to be depressed. Because most raw material supply in Korea depends upon oversea imports, unexpected raw material price fluctuation affects Korean industrial economies through macroeconomic variables. So Korean government enforces some political measures such as demand management and the supply-security assurance as long-range policies, and reservation and general early warning system as short-range policies. In short-range policies, it is necessary to be expected short term fluctuation. Up to recently, there have been many researches and most of those researches use parametric methods or time series analyses. Because those methods and analyses often generate inadequate relations among variables, it is possible that some consistent variables are left out or the results are misunderstood. This study, therefore, is aim to mitigate those methodological problems and find the relatively appropriate model for economic explanation. So that, in this paper, by using non-parametric signal approach method mitigating some shortages of previous researches and forecasting properly short-range prices fluctuation of non-ferrous materials are presented empirically.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.129-136
• /
• 2012

Temperature of fresh concrete can be effectively used to predict the strength of concrete being cured and make an informed decision for stripping the molds. A hygrothermograph and thermo-couple sensors that require an extensive wiring have been applied to measure a temperature of concrete at the early stage of the curing process on site. However, these methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. Therefore, this study is aiming at developing a device based on wireless sensor network to measure the temperature of concrete being cured in formwork. The result showed that the wireless sensor with probe type thermistor which is developed had the same temperature data compared to the existed wire type thermistor, and we confirmed the temperature history of concrete in real time for 28 days throughout the gateway by wireless network that collects the temperature data measured from specimens in laboratory. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. If the wireless sensor network device developed uses in the field, the temperature management of concrete will be systematically conducted from at the early stage of the curing, and especially be effective for cold weather concrete construction. In addition, it will contribute to the establishment of advanced quality control system for concrete and productivity of supervisors on site will be increased in the future.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.373-378
• /
• 1991

The skin and fleshy substance on the net fiber of sponge-gourd fruit pressed mechanically was removed with 0.2% NaOH solution in $3{\sim}5$ hours. The treatment of 0.2% NaOH with 0.02% Monopol(non-ionogenic polyoxethylen derivative) as surfactnat and with 0.1% $Ca(OCl)_2$ as bleaching agent enhanced the effect to remove the fleshy substance and improve the quality of net fiber. Also, the wet hardness and tensile strength of net fiber were controlled by the crosslinkage of the fiber with glu tardialdehyde, glyoxal, and formalin, respectively. The net fiber was stable on the acid and alkaline solutions. Also the range of temperature to degradate the fiber was $338{\sim}385^{\circ}C$. These values indicated a fair stability. The improved net fiber can be used for raw material of bath, dish washing, oil and gas filter, and many kinds of decorations.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.195-205
• /
• 2001

A great deal of energy is necessary with emission of lots of wastewater in dyeing and finishing process, but heat recovery from wastewater is not introduced since is technology is not developed yet. In order to obtain the method utilizing hot water produced by heat source, that is, dyeing wastewater it was investigated the characteristics of dyeing and finishing process and energy basic unit. Energy basic unit of polyester/cotton (T/C), polyester/rayon (T/R) and polyester dyeing process are higher than that of the other process. The average quantity of wastewater for each dyeing company is 20,470 ton/month, the average temperature of wastewater is about 41$^{\circ}C$. Because the SS solution of wastewater in polyester dyeing process is lower than that of the other process, the effect of corrosion in heat recovery system is low. Since the energy price for 1000 kcal produced by vapor compression heat pump is presumed to be 22.50 won, it is found to be very economic heat recovery system, and its payback is 2.09 years for the factory with LNG boiler.