• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.47-56
• /
• 2020

In this study, three levels of W/B(Water to Binder) ratio (0.37, 0.42, 0.47) and substitution ratio of GGBFS (Ground Granulated Blast Furnace Slag) rate (0 %, 30 %, 50 %) were considered to perform RCPT (Rapid Chloride Diffusion Test) at the 1,095 aged day. Accelerated chloride diffusion coefficient and passed charge of each concrete mixture were assessed according to Tang's method and ASTM C 1202, and improving behaviors of durability performance with increasing aged days are analyzed based on the test results of previous aged days from the preceding study. As the age of concrete increases, the passed charge and diffusion coefficient have been significantly reduced, and especially the concrete specimens containing GGBFS showed a significantly more reduction than OPC(Ordinary Portland Cement) concrete specimen by latent hydraulic activity. In the case of OPC concrete's results of passed charge, at the 1,095 days, two of them were still in the "Moderate" class. So, if only OPC is used as the binder of concrete, the resistance performance for chloride attack is weak. In this study, the time-parameters (m) were derived based on the results of the accelerated chloride diffusion coefficient, and the deterministic and probabilistic analysis for service life were performed by assuming the design variable as a probability function. For probabilistic service life analysis, durability failure probabilities were calculated using Monte Carlo Simulation (MCS) to evaluate service life. The service life of probabilistic method were lower than that of deterministic method, since the target value of PDF (Probability of Durability Failure) was set very low at 10 %. If the target value of PDF suitable for the purpose of using structure can be set and proper variability can be considered for each design variable, it is believed that more economical durability design can be made.

• Fire Science and Engineering
• /
• v.18 no.3
• /
• pp.45-50
• /
• 2004

Thermal degradation of PVC which used for insulator of 600V vinyl insulated wire has been studied by thermo gravimetry analysis and accelerated thermal aging test. The activation energy using thermo gravimetry analysis was determined by the kinetic methods, such as Kissinger and Flynn-Wall-Ozawa. The activation energy was determined to from 89.29 kJ/mol to 111.39 kJ/mol in 600V PVC insulated wire and from 97.80 kJ/mol to 119.25 kJ/mol in 600v heat-resistant PVC insulated wire. And also, the activation energy through a long-term thermal aging test was calculated by using Arrhenius equation In the low temperature of 8$0^{\circ}C$, 9$0^{\circ}C$, 10$0^{\circ}C$. The results showed that 600V PVC insulated wire was 92.16 kJ/mol, and 600v heat-resistant PVC insulated wire was 97.52 kJ/mol. Consequently, the activation energy of 600V heat-resistant PVC insulated wire is larger than 600V PVC insulated wire. Therefore, it can be predicted that 600V heat-resistant PVC insulated wire has a long-term stability relatively.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.3
• /
• pp.160-167
• /
• 2007

Shelf-stability of powdered model food was determined during storage at various temperatures ($25^{\circ}C$, $35^{\circ}C$) and various moisture contents (3.5%, 6.0%, 8.0%). Moisture content, peroxide value, pH, color, microbial counting and sensory evaluation were conducted during storage. Moisture content, peroxide value, pH and color were not significantly changed during storage in all samples indicating that this powdered model food was relatively stable at given conditions. Pathogenic microorganisms, such as Bacillus cereus, Listeria spp., Clostridium perfrigens, Salmonella spp. and Staphylococcus aureus, were not found during storage suggesting that there was no problem in safety in this case. On the other hand, the number of artificially added Lactic acid bacteria was decreased with increasing both storage temperature and moisture content. Therefore, powdered model food was very shelf-stable and it was impossible to predict the shelf-life using above quality factors.

• The Microorganisms and Industry
• /
• v.12 no.2
• /
• pp.2-13
• /
• 1986

Agrobacterium tumefaciens의 연구는 유전공학 시대를 맞이하여 많은 연구자들의 커다란 주목을 끌고있다. 식물세포내에 외부 유전자를 도입시키는, 확실히 믿을 수 있는 vector로 등장된 때문이다. 원래 이세균은 식물 줄기나 뿌리에 암종을 유발시키므로서 암발성 원인 구명 연구로 흥미를 끌게 되었다. 연구결과는 암발생 예방및 치료에 목적을 둠은 덩연할 것이다. 많은 약제가 시험되었으나 별로 진전을 보지 못하던중 비 원인성인 Agrobacterium radiobacter, strain 84에 의한 생물학적 방제의 성공으로 유일한 방제법을 갖게되었다. 뒤이어 암종발생 기작도 밝혀졌다. Agrobacterium의 세계는 온통 유전공학 기술로 채워져 있다. 암종발생에서 방제원리에 이르기까지 수없이 먼 옛날부터 이미 익혀오던 DNA 조작기술이었던가\ulcorner 암종을 유발시키는 agrocin84 plasmid를 갖는 비병원성 Agrobacterium을 찾아 생물학적 방제법을 확립하였다. 그후 병원성 Agrobacterium은 이에 대하여 어떻게 살아남을 것인가\ulcorner 실로 놀라운 일이라 아니할 수 있을까\ulcorner 이 병원성 Agrobacterium은 비 병원성 Agrobacterium 속에 있는 agrocin 84 plasmid을 탈취하여 자신이 agrocin84를 생성분비하며 암종 유발을 계소하여 간다. 아니면 비병원성 Agrobacterium이 병원성 Agrobacterium에게 agrocin 84 plasmid를 넘겨주었을까\ulcorner 왜 넘겨주었을까\ulcorner 공존을 위하여서일까\ulcorner 우리의 유전공학 기술은 이것을 막아줄수 있을까\ulcorner 생물학적 방제의 재성공을 위하여 논제의 연구는 왜 필요했던가\ulcorner 그 전후를 여기에 서술해 본다.닭이며 또한 제한된 지면에서 충분히 고찰하기는 어렵다. 우리나라에서 자주 거론되는 백신 및 종류에 국한하여 그 문제점과 앞으로의 전망을 고찰해 보기로 한다.ocking electrode를 제작하여 복합고분자 전해질과의 계면저항을 측정하였다.nm (1.2921eV)는 acceptor-bound exciton 인 I1(AO,X) 이고, 964.6nm(1.2853eV)는 donor-acceptor pair(DAP) 발광, 1341.9nm (0.9239eV)는 self activated(SA)에 기인하는 광발광 봉우리로 고찰되었다.가 높을수록 방출전류가 시간에 따라 급격히 감소하였다. 각 duty비에서 방출전류의 양이 1/2로 감소하는 시점을 에미터의 수명으로 볼 때 duty비 대 에미터 수명관계를 구해 높은 duty비에서 전계방출을 시킴으로써 실제의 구동조건인 낮은 duty비에서의 수명을 단시간에 예측할 수 있었다. 단속적으로 일어난 것으로 생각된다.리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고, 사회로의 복귀가 빠르며, 고위험군에 적용할 수 있고, 무엇보다도 미용상의 이점이 크다는 면에서 자연기흉에 대해 유용한 치료방법임에는

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.177-189
• /
• 2021

Defense R&D is a key process for securing weapons systems determined by mid- and long-term needs to cope with changing future battlefield environments. In particular, the test and evaluation provides information necessary to determine whether or not to switch to mass production as the last gateway to research and development of weapons systems and plays an important role in ensuring performance linked to the life cycle of weapons systems. Meanwhile, if you look at the recent changes in the operational environment of the Korean Peninsula and the defense acquisition environment, you can see three main characteristics. First of all, continuous safety accidents occurred during the operation of the weapon system, which increased social interest in the safety of combatants, and the efficient execution of the limited defense budget is required as acquisition costs increase. In addition, strategic approaches are needed to respond to future battlefield environments such as robots, autonomous weapons systems (RAS), and cyber security test and evaluation. Therefore, in this study, we would like to present strategies for improving the testing and evaluation of weapons systems by considering the characteristics of the security environment that has changed recently. To this end, the improvement strategy was derived by analyzing the complementary elements of the current weapon system operational test and evaluation system in a multi-dimensional model and prioritized through the hierarchical analysis method (AHP).

• Land and Housing Review
• /
• v.10 no.3
• /
• pp.23-32
• /
• 2019

Vacuum Insulation Panel(VIP) has the lowest thermal conductivity among present insulations. It is composed of envelope, core material and getter. Aluminum film is usually used as the envelope of VIP, and it is important component to decide the useful life of VIP. In this research, the thermophysical properties of incombustible fiber glass core VIP were investigated with the possibility of its architectural applications. The results of this research can be summarized as follows: 1) The thermal conductivity of 20mm-thick fiber glass core VIP is resulted as 0.00177W/m·K, which means that 20mm-thick VIP can meet all the reinforced insulation guideline and it can be used in any envelope of any region in Korea. 2) As a result of the test of incombustion and gas toxicity, fiber glass core VIP was suitable for incombustible material. 3) As the test result for the long term thermal conductivity, fiber glass core VIP was found out that it would keep above 10 times insulating performance than polystyrene foam and glass fiber. 4) To meet the thermal transmittance of 0.12W/㎡K, limited-combustible insulation of expanded polystyrene foam and phenolic foam should be used respectively as thick as above 280mm and 170mm, incombustible VIP can meet the same insulation level with 20mm thickness. 5) The price competitiveness of incombustible VIP to meet the thermal transmittance of 0.12W/㎡·K was about 1,500won/㎡ higher than that of phenolic foam.

• Journal of the KSME
• /
• v.21 no.1
• /
• pp.21-31
• /
• 1981

원자력발전소의 원자로냉각재 압력경계의 건전성과 안정성을 확보하기 위하여 법적 요구조건을 설정함에 있어 파괴역학이 어떻게 적용되었는 가를 설명하였다. 이를 요약하면 다음과 같다. 1) 압력경계에 사용되는 재료의 $RT_{NDT}$를 정의하였다. 이는 무연성천이온도와 같은 개 념의 것으로, 앞으로 재료의 파괴인성은 이 $RT_{NDT}$에 대한 상대온도의 함수로 주어진다. 2)비연성파괴를 방지하기 위한 설계조건으로서 선형탄성 파괴역학에 근거한 조건식을 인용하였다. 여기서 조건식이란 능력확대계수의 합계가 어떠한 조건에서도 이러한 조건식을 만족한다는 것을 해석적으로 확인하고 규제당국의 승인을 받아야 한다. 3) 가동중검사에 발견된 결함으로 합격수준을 초과하는 것은 파괴역학적으로 해석하여 구조적 으로 안전하다는 것은 파괴역학적으로 해석하여 구조적으로 안전하다는 것을 입증하여야 한다. 이때 결함은 원자로의 가동과 더불어 성장하므로 수명기간중 피로파괴에 이를 것인지의 여부도 평가하여야 한다. 이때의 대조균열성장률은 Paris의 power law에 따른다. 4) 고속중성자 (E>1. 0MeV)에 의한 조사취화를 감시하기 위하여 감시시험계획을 사전에 수립 하고 이에 따라 감시시험을 수행하여 조사에 수립하고 이에 따라 감시시험을 수행하여 조사에 의한 원자로용기 재료의 파괴인성의 저하를 평가하여 이를 고려한 충분한 안전여유를 갖는 운 전조건 즉, 압력-온도 한계곡선을 산출하여야 한다. 이때의 취화 정도는 DELTA. $RT_{NDT}$ 와 Upper Shelf Energy의 감소로 나타낸다. 또한, 압력-온도 한계곡선은 선형관성 파괴역학에 입각한 조건식을 이용하여 해당 온도에서의 압력을 산출한다. System을 개발 사용하기 위하여 기존 전자계산소를 이용하는 방법이 바람직하며 System의 도입은 자체운영을 결정하기 전에 경제적인 여건 등 여러가지 문제를 검토하여야 한다. 특히 Turn Key Base로 System를 도입할 경우에는 System의 도입목 적과 사용빈도, 앞으로의 확장성 현재 설계및 생산 과정과의 마찰가능성, 유지보수문제 등을 신 중히 검토하여야 한다. 이제 기계공업도 전자계산기를 이해하고 사용하므로 서 발전할 수 있는 단계가 되었다. 예로부터 좋은 공구를 개발하여 적절히 사용하는 것이 기계공업 발전의 첩경이 었다. 전자계산기는 현대 기술이 개발한 가장 강력하고 사용하기 좋은 공구이다.점에서 피로구열의 안정성장을 논하고, 과거 10여년간의 피로 crack문제에 대한 연구방법, 실험방법 등을 소개하는 방향으로 고 를 진행시켜 나가겠다.에 그 효과가 증대됨을 알 수 있었다.적용한 임상실험이 수행되어야 할 것이다. 또한 위치결정에서 획득한 좌표값의 정확성을 알아보기 위해서 팬톰을 이용한 방사선조사 실험이 추후에 실행되어져야 할 것이다. 그리고 제작된 프레임에 Rotating X선 시스템과 내부 장기의 움직임을 계량화하고 PTV에서의 최적 여유폭을 설정함으로써 정위 방사선수술 및 3 차원 업체 방사선치료에 대한 병소 위치측정과 환자의 자세에 대한 setup 오차측정 결정에 도움이 될 수 있을 것이라고 사료된다. 상대적으로 우수한 것으로 나타났으며, 혼합충전재는 암모니아의 경우 코코넛과 펄라이트의 비율이 7：3인 혼합 재료 3번과 소나무수피와 펄라이트의 비율이 7：3인 혼합 재료 6번에서 다른 혼합 재료에 비하여 우수한 것으로 나타났다. 4. 코코넛과 소나무수피의 경우 암모니아 가스에 대한 흡착 능력은 거의 비슷한 것으로 사료되며,

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.197-203
• /
• 2014

The technology to predict and prevent an accident of the cable system in power station is required. The techniques of inactivated diagnosis, partial discharge and $tan{\delta}$, have been adopted to diagnoze the operating characteristics of cables, but it is not so easy to find out problems in cables in an inactive state before the cable accident happens. In this paper, we did a research on the 6.6kV high-power cables, installed at Korean Western Power Station Co., Ltd. in order to diagonize the cables, playing a major role at the station. We have developed an equipment to measure an insulation resistance based on the temperature and current of the cable. By installing the system in a power station, we could find abnormal status for evaluation of the lifetime. In the short term, by analyzing the data, we apply the research result to the diagnosis and evaluation of the 6.6kV power cables. In the long run, however, we plan to reduce the cost of the installation and operation of cable systems at power stations.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.135-143
• /
• 2006

This study evaluated the fatigue resistance characteristics of hot-mix recycled asphalt mixtures which were prepared by a new blending method. Since the binder of RAP shows higher viscosity without being rejuvenated in the ordinary recycled mixture, this new(modified) blending method was developed for obtaining more uniform level of binder viscosity in the recycled mixture. Cold-planned RAP was collected and mix design was performed using 15% RAP content for two virgin aggregate, gneiss and granite. Penetration grade of 60-80 asphalt was used in mixing recycled mixture together with a polymer modifier, LDPE. Indirect tensile fatigue tests were carried out to evaluate characteristics of fatigue resistance of performance of recycled asphalt mixtures. The recycled mixtures with LDPE 6% showed higher repeated loading fatigue life. Fatigue life ratio of new(N) mixing method mixtures was approximately 0.6-0.7 before aging and 0.8-1.0 after aging treatment of ordinary(O) mixing method mixture. This means the N mixture becomes stronger with aging process increase. If further aging is treated, N mixture may be showing stronger resistance than O mixture.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.75-89
• /
• 2004

Long term performance of concrete pavement significantly depends on the given construction and environmental condition. It means that random cracks and extreme crack width due to inappropriate quality control at the early age might lead to decreasing the pavement service life. The temperature and moisture during the construction, cement and aggregate types, curing condition are major components to affect the quality of the concrete pavement at the early age. First of all, the high temperature differential, that is made by increasing air temperature and the heat of cement hydration, is known as the major contributor to severe cracks. In this study, tent covering was used for controlling temperature of the concrete slab. The field measurement data indicates that the effect of the tent covering is very significant to decrease possibilities of random crack occurrence and curling stress and enhance the long-term concrete strength. HIPERPAV(High PERformance PAVing software), a program predicting the strength and stress of an earty-age concrete pavement (72 hour after placement), is used for simulating the effects of tent covering. The HIPERPAVE results showed that the section with the tent covering has higher reliability than the section without the tent covering by 22.5%. In details, reliability is increased 72.5% (without the tent covering) to 95% (with the tent covering).