• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.385-393
• /
• 2009

This study grasped the relationship between relative humidity in concrete and concrete shrinkage followed by pre-absorbed water of porous lightweight aggregates through measurements of concrete shrinkage and humidity and comparisons with established research results. It was showed that shrinkage reduction effect of lightweight concrete is 36% at 7 days early ages and 25% at 180 days long-term ages when water-binder ratio is 0.3. It also showed that shrinkage reduction effect is 19% at 7 days and 16% at 180 days when water-binder ratio is 0.4 and 37%, 32% when water-binder ratio is 0.5. The moisture supply effect of lightweight aggregates was remarkable at early age within 7~10 days irrespective of water-binder ratio. In case of waterbinder ratio is 0.3, the relationship between shrinkage and internal humidity of concrete has been underestimated regardless of applied existing model type and in case of water-binder ratio is 0.4, 0.5, measurement values are relatively similar with existing model equations. Finally this study did regression analyses about the relation among the humidity change and the shrinkage strain as a high-degree polynomial and derived parameters that can connect moisture movement analysis with differential shrinkage analysis in case of considering relative humidity at the time by moisture movement analysis of concrete.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.93-102
• /
• 2005

Manufacturing conventional column base plate requires much manpower and time. In this research, a new method for constructing column base plate is introduced to improve on conventional methods through the use ofcast steel that is available for adjusting base plate thickness and enlarging base plate stiffness. The main purposes include reducing welding work, enlarging base plate stiffness, and clarifying the stress flow. Also, construction convenience and improvement in quality can be expected. For developing this cast steel base plate, test specimens of conventional and cast steel base plates are made and tested to analyze strength and stiffness. Also, the efficiency for long-term use is checked by fatigue tests. From these comparative tests, cast steel base plates have the same strength and stiffness as conventional base plates.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.2
• /
• pp.61-69
• /
• 2005

The coastal erosion and the look of a heap which are mainly occurred in the district along the coast are found for various forms such as the estuary closing, the estuary sand bar the development of the coast sand bar, and the modification of coastline. Recently, due to the coastal development, these transformations have been intensified. The change of coast, which has been made slow progress is required long-term study on a searching examination of the root cause and a suggestion of a counter measure. In this research, ortho aerial photos were produced to analyze volumes of topographical alternations that have been progressed fer the long run, by 10s cycle from 1940s through 1990s, to compute accurate volumes of coastline variation, through a datum point and G.C.P (Ground Control Point). Also in this study, without respect to water level, the coastline variation was analyzed by using comparatively analyzed a Idlest land map, a cadastral map. And to analyze topographical variation volumes, the tidal station's materials was used under consideration f3r tide. Finally, topographical variation volumes are comparatively analyzed through surveying and sounding and a point of fine of aviation photographing was calculated and revised. After this research, by using ortho aerial photos, We can understand efficiency of these in computing volumes of variations of coastline by analyzing quantitatively erosion and look of a heap. Besides, in the future, these will be used for information gathering of the coastline integration control system.

• Korean Journal of Veterinary Research
• /
• v.42 no.3
• /
• pp.411-418
• /
• 2002

Thirty rabbits underwent femoral lengthening using monolateral external fixator to evaluate results and complications of limb lengthening. Twenty rabbits survived until consolidation of callus formed at the lengthening site after finishing lengthening. Ten rabbits were sacrificed during femoral lengthening because of complications. Survived 20 rabbits were classified to two groups according the amount of lengthening: group I (10% lengthening of the femoral length); group II (20% lengthening). There was no significant difference of consolidation time between two groups (p=0.25). Varus angulation at the lengthening site occurred in 60% of two groups and the amount of varus angulation in group II was larger than that of group I. Degenerative change of articular cartilage at the medial condyle of the distal femur was found in 30% of group II. Of sacrificed ten rabbits, 5 had pin loosenings with pull an of pins from the femur, 2 had fermoral fractures around the pin-tract site, and 3 had severe osteomyelitis of the femur around the pin-tract site.

• Journal of Chest Surgery
• /
• v.29 no.10
• /
• pp.1118-1122
• /
• 1996

From January 1990 through December 1995, 43 patients underwent diaphragmatic plication for the management of phrenic nerve palsy .complicating various pediatric cardiovascular surgery. Their mean age at plication was 11.1 months and sex ratio was 31 males to 12 females. In order of decreasing incidence, the primary cardiovascular procedures included modified Blalock-Taussig shunt (7), total correction for the Tetralogy of Falloff (7), arterial switch operation (6), unifocalization for the pulmonary atresia with VSD (3), modified Fontan operation (3), VSD patch closure (3) and others. The involved sides of diaphragm were right in 17, left in 2) and bilateral in 3. Extensive pericardial resection with electocauterization of resected margin was thought to be the most common cause of phrenic nerve palsy (20). The interval between primary operation and plication ranged from the day of operation to 98 days (median 11 days). The methods of plication were central pleating technique(plication with phrenic nerve branch preservation) in 41, and other technique In 2. 10 patients died after plication (7: early, 3; late), and the causes of death were thought to be unrelated to plication itself. Among the 36 early survivors, extubation or cessation of positive pressure ventilation could be accomplished between 1 and 24 days postoperatively(mean : 4.5). Cumulative follow-up was 92 patient years without major complications. Postoperative follow-up fluoroscopy was performed in 6 patients, and the location and movement of plicated diaphragms were satisfactory in 5 patients. We concluded that diaphragmatic plication with preservation of phrenic n rve branch could lead to cessation of positive pressure ventilation and complete recovery of diaphragmatic function in the long term, unless the phrenic nerve was irreversibly damaged.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.6
• /
• pp.17-26
• /
• 2011

Ground anchor method is one of the most popular reinforcing technology in Korea. For the sound monitoring of slope reinforced by permanent anchor for a long period, monitoring the tension force of ground anchor is very important. However, special technology except conventional load cell has not been developed for this purpose. In this paper, a new method is described to replace the conventional strain gauge and V.W. type load cell which has been commonly used as a prestress force monitoring tool for a short-term and long-term. Four 11.5 m long strain detectable tension type anchors were made using FBG sensor embedded tendon since FBG sensor is smaller than strain gauge type load cell and does not have noise from electromagnetic wave. Each two set strain detectable tension type anchors were installed into the different ground conditions, i.e., soft rock and weathered granite soil. Prestress force of ground anchor was monitored during the loading-unloading step from in-situ pullout test using proposed FBG sensor embedded in the tendon and the conventional load cell Test results show that the prestress force monitored from FBG sensor may well be used practically, for it almost matches with that measured from expensive load cell.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.132-132
• /
• 2000

환경오염과 이상기후의 영향으로 인한 수자원의 고갈과 함께 국내의 경우 수자원 개발 계획 및 수요량을 감안할 때 향후 7 년 내에 물부족 현상을 겪을 것이라는 보고가 있 었으며, 환경부담을 줄이기 위해 폐수의 배출기준은 강화되고 있다. 이러한 상황에서 제조 특성상 타 업종에 비해 폐수 발생량이 높은 편인 국내의 제지산업은 여러 해전부터 이에 대 한 방안을 모색하여 왔다. 일반적으로 폐수 수질 관리와 청수 사용량의 절감을 위해 고가의 폐수 처리 장치를 설치하거나 폐수 재활용을 통해 공정을 극도로 폐쇄화하는 방안으로 연구 가 진행되어 왔다. 이 중 용수의 재활용이 가장 경제적인 방법이지만, 재활용이 지속될수록 각종 무기염과 콜로이드성 유기물질이 축적되어 각종 약품의 효능 저하, 탈수속도의 저하 및 생산 제품의 품질 악화 등의 문제를 유발한다고 알려져 있다. 이를 해결하고자 하는 노 력으로 펄프 원료에 따른 공정수 내 용해성 물질의 분석과 재활용 횟수에 따른 각종 SS와 D DS의 축적 정도에 대한 기초 연구가 수행되었으며, 고폐쇄화된 공정에서 성능을 발휘할 수 있는 첨가제의 개발과 적용 방법에 대한 연구도 수행된 바 있다.여러 지종 가운데 골판지 원지는 용수의 재활용률이 상당히 높은 지종이기 때문에 공정수의 재활용이 진행될수록 열악한 저급 원료로부터 각종의 다양한 물질이 용출 혹은 배 출되며, 이러한‘물질은 골판지 원지의 강도 발현에 더욱 악영향을 미칠 것으로 판단되었다. 미세분으로 구성된 SS의 경우 이미 많은 연구를 통해 특성이 파악되었기 때문에 본 연구에 서는 ss를 제외한 공정수를 두 가지로 크게 나누어 고려하였다. 즉, ss로 측정되지 않지만 닥도를 유발할 수 있는 미세 무기물질과, 용해성의 무기염, 첨가제 및 추출물 둥으로 이루어 진 용해성 성분으로 나누어 분석하였으며, 또한 각각이 초지 특성에 미치는 영향을 살펴보 고자 하였다.을 해석코자 하였으며, 그 방법으 로 수치해석기법을 도입하였다. 또 실제 캘린더링 전후의 두께 변화를 측정하여 유리전이온도 의 도달 깊이와 비교하였다. 지필의 압축 정도는 롤의 직경과 닙 폭을 이용하여 MD 방향으 로 함수화하였으며, 열전달 계수로는 겉보기 값을 사용하였다. 이때 지펼은 균질한 것으로 가 정하였다. 함수율은 유리전이온도를 좌우하는 가장 큰 인자이나 본 연구에서는 항온항습처리 를 통해 유입지의 함수율을 고정시켰으며 캘린더링 시 함수율의 변이는 없다고 가정하였다. 그 결과 열침투깊이가 증가할수록 지필은 보다 변형되기 쉬운 상태가 되어 주어진 압력 조건에 대해 소성변형 정도가 증가하는 것으로 나타났다. 이는 캘린더링 전후에 두께 변화를 측정하여 정량적으로 평가할 수 있었다. 수치해석기법을 통해 같은 압력 조건에서 온도가 증 가함에 따라 혹은 같은 온도 조건에서 압력이 증가함에 따라 지필 내의 유리전이온도의 침투 깊이가 증가함을 알 수 있었으며 이는 캘린더링 전후의 두께 변화의 측정 결과와 일치하였 다. 또 NRT가 증가함에 따라서도 유리전이온도 침투 깊이가 증가하였다.합편에 비해 일부 우수한 양상을 보였지만 본 실험의 범위내에서는 통계적 정량적 차이를 제시할 수는 없었다. 향후 보다 광범위한 동물 실험이 필요할 것으로 사료된다.된다.하고도 완전교정술 도달 확률이 높은 치료전략이라는 사실을 입증하였으며 주대동맥폐동맥혈관부행지의 크기나 숫자가 단일화하기 쉬운 형태학적 특징을 지닌 경우에는 조기에 일단계완전교정술을 시행하여 양호한 결과를 얻을 수 있다는 사실을 발견하였다. 반면 본 환아군 중 단일화술을 먼저 시도한 군에서는 비록 단계적인 단일화를 시도한 군에서 단일화술과 관계된 수술사망율이 약간 낮기는 하였으나 완전교정술까지 완료될 가능성에는 차이가 없었다. 그러나 이 경우 보다 정련된 적응 환자의 선택을 통한 단일화 우선전략의 시도와 장기 추

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.102-108
• /
• 2010

Impaction is the cessation of eruption process caused by physical obstacles on the eruption pathway, abnormal tooth position, or lack or space. It often occurs in association with supernumerary teeth, odontogenic tumor, or cystic lesions, and ameloblastic fibroma is one of the odontogenic tumors that can cause impaction of teeth. In many cases, ameloblastic fibroma occurs in association with one or more unerupted teeth. The proper management of ameloblastic fibroma is determined between conservative resection or more aggressive block resection, based size and morphologic features of the lesion and age of the patient. This is a case of a 8 year and 6 month old boy whose lower left permanent molar showed eruption disturbance. The impacted tooth was successfully repositioned favorably through surgical exposure and orthodontic traction using a modified halterman appliance. Long term follow-up, longer than 10 years, is planned considering relatively high recurrence rate and possibility of malignant transformation of ameloblastic fibroma, which cause impaction of the lower left permanent molar in this case.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.301-308
• /
• 2021

It is important to develop a digital SOC (Social Overhead Capital) maintenance system for preemptive maintenance in response to the rapid aging of social infrastructures. Abnormal signals induced from structures can be detected quickly and optimal decisions can be made promptly using IoT sensors deployed on the structures. In this study, a digital SOC monitoring system incorporating a multimetric IoT sensor was developed for long-term monitoring, for use in cloud-computing server for automated and powerful data analysis, and for establishing databases to perform : (1) multimetric sensing, (2) long-term operation, and (3) LTE-based direct communication. The developed sensor had three axes of acceleration, and five axes of strain sensing channels for multimetric sensing, and had an event-driven power management system that activated the sensors only when vibration exceeded a predetermined limit, or the timer was triggered. The power management system could reduce power consumption, and an additional solar panel charging could enable long-term operation. Data from the sensors were transmitted to the server in real-time via low-power LTE-CAT M1 communication, which does not require an additional gateway device. Furthermore, the cloud server was developed to receive multi-variable data from the sensor, and perform a displacement fusion algorithm to obtain reference-free structural displacement for ambient structural assessment. The proposed digital SOC system was experimentally validated on a steel railroad and concrete girder bridge.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.177-188
• /
• 2022

Recently, the application of distributed acoustic sensors (DAS), which can replace geophones and seismometers, has significantly increased along with interest in micro-seismic monitoring technique, which is one of the CO₂ storage monitoring techniques. A significant amount of temporally and spatially continuous data is recorded in a DAS monitoring system, thereby necessitating fast and accurate data processing techniques. Because event detection and seismic phase picking are the most basic data processing techniques, they should be performed on all data. In this study, a machine learning-based P, S wave phase picking algorithm was developed to compensate for the limitations of conventional phase picking algorithms, and it was modified using a transfer learning technique for the application of DAS data consisting of a single component with a low signal-to-noise ratio. Our model was constructed by modifying the convolution-based EQTransformer, which performs well in phase picking, to the ResUNet structure. Not only the global earthquake dataset, STEAD but also the augmented dataset was used as training datasets to enhance the prediction performance on the unseen characteristics of the target dataset. The performance of the developed algorithm was verified using K-net and KiK-net data with characteristics different from the training data. Additionally, after modifying the trained model to suit DAS data using the transfer learning technique, the performance was verified by applying it to the DAS field data measured in the Pohang Janggi basin.