• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.12-13
• /
• 2003

광 솔리톤은 고속, 장거리 광통신시스템에서 분산과 self-phase modulation(SPM)에 의한 문제를 해결하기 위한 효과적인 기술 중의 하나이다. 현재, 솔리톤 전송은 장거리 해저 광전송시스템 뿐만 아니라 중거리 및 근거리 고속 전송시스템에서도 적용하기 위한 연구가 집중되고 있다. 특히, 솔리톤 전송은 광전중계기 없이 장거리 전송이 가능한 장점으로 인하여 기존의 중, 단거리링크를 초고속링크로 업그레이드하기 위하여 많은 연구가 진행되고 있다. (중략)

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.91-92
• /
• 2012

본 논문은 인버터와 모터 사이의 선로가 긴 경우 장거리 전송 선로의 부유 임피던스로 인하여 발생하는 출력전압의 오버슈트 및 링잉현상을 저감하기 위하여 장거리 전송선로를 모델링하고 인버터의 출력 필터를 설계한다. 이때, 전송선로의 임피던스 모델링을 위하여 다양한 방식으로 접근하고 효율적인 전송선로 모델링 방식을 결정한다. 전체과정은 이론적인 분석과 시뮬레이션을 통하여 검증한다.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.216-222
• /
• 2018

Long-range wireless power transmission technology goes beyond mere cell phones and small appliances, and is the core technology of 4'th industrial revolution such as robot, electric car, and IoT sensor network. In this paper, we will explore the evolution of long-range wireless power transmission technologies that have already become commercially available, with rapid advances in technology, beyond the traditional short-range technology that has become technologically common. Through this, it is intended to check the domestic research level and progress by identifying core technologies and technical challenge.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.181-185
• /
• 1998

Gain characteristic of concatenated erbium-doped fiber amplifiers(EDFA) are studied with a recirculating EDFA loop. For a non-flat gain EDFA, the 3 dB gain bandwidth was reduced to 6 nm after the 20th EDFA. However, for an optimized gain flattened EDFA, in a simple configuration, the 5 dB gain bandwidth was found to be 9nm, even after the 100th EDFA, corresponding to 8000km transmission. This results suggest that the simple optimized flat gain amplifier could be a good candidate for ultra-long distance wavelength division multiplexed transmissions.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.47-52
• /
• 2018

Wi-Fi enabled Internet of Things (IoTs) had a substantial impact on society, economy and industry. However wireless connectivity technologies in unlicensed band such as Wi-Fi are vulnerable to interferences. They also face difficulty providing wireless connectivity over long range in dense networks due to the dynamically changed interference effect and asymmetric interference conditions. In this paper, robust acknowledgement transmission scheme is proposed for long range IoTs. According to the proposed scheme, it is possible to control the transmission rate of the transmission success rate of the response frame by adjusting the transmission rate of the response frame when the interference is present asymmetrically. It is also possible to use higher data rate when high quality link is guaranteed. The evaluation results demonstrated the proposed scheme improves the aggregate throughput by at most 9 Mbps when 20 MHz bandwidth transmission mode was adopted.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1219-1224
• /
• 2016

The current wireless power charge technologies are based on induction coupling, magnetic resonant coupling, electromagnetic wave, etc. However, the current wireless power charge technologies has several disadvantages including short transfer range, electromagnetic interference, etc. In this paper, we investigate and demonstrate a laser wireless power charge technology. A laser source is used in the transmitter to convert from electric power to optical power and a solar cell or a photodiode is used in the receiver to convert from optical power to electric power. The laser wireless power charge technology may be the most efficient wireless power charge technology in the long distance over than 10 meters. Our experimental results show a transfer efficiency of 2.15% at the 70-m long distance with a 100 mW laser transmitter and a photodiode receiver.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.516-526
• /
• 2007

Wireless mesh network is not only WLAN technology but it says core technology for implementation of ubiquitous network and we have to application on a various field through connection with the sensor network. However, there are limited to 100mW in the maximum power because WLAN is used into transmission frequency band to ISM band. The mesh network based on WLAN is essential study for a long distance transmission in the limited maximum power that it is doing to cost-efficient network of backbone. Therefore, in this paper, we have presented an conquerable method to limitation of reaching distance of wireless mesh network and made several experiments to presentation the proposed method. The results show that it is possible to rise a long distance transmission and power efficiency into application of various antenna and function definition and implementation of device driver.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.170-176
• /
• 2008

According to the development of Internet, DWDM system needs to improve the performance for long distance transmission international optical signals. For higher the transmission capacity, we have to raise the transmission speed and increase a number of channels. To make qualifications, there are a lot of technologies such as line coding, modulation, precious fiber, broadband amplification, dispersion and forward error correction. Especially, FEC has been considered as a progressive technology for long distance transmission to carry out high speed and large capacity traffic. This paper introduced the progress of each new generation of FEC and the way to employ by current system analyzed the coding gain.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2009

Propagation of electromagnetic wave in the water or underground is very difficult because of the conductivity of the propagation materials. In this case, we usually use acoustic signal as ultrasonic but, it is not easy to transfer long distance with coherent method because of time varying multipath, doppler effect, and attenuations. So, we use noncoherent method as FSK to communicate between long distances. But, as the propagation speed of acoustic sound is very slow, the BW of the channel is narrow. It is very hard to guaranty the enough speed of communication like digital image data. In this paper, we proposed a new data communication protocol which can transmit multi-bit digital data with every single ping, and improve the data communication speed in the water.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.1
• /
• pp.56-62
• /
• 2006

Currently, Most of the Backhual and Submarine's networks are being installed using DWDM and EDFA to deal with dramatically increasing internet traffic. In a conventional type optical system, the so-called 3R repeater, fiber non- linearity was not significant factor but it is one of the most important consideration when designing new DWDM network based on the EDFAs. To minimize the signal pulse distortion in long-haul optical network, Zero-dispersion fiber is indispensable but causes the fiber non-linearity. Therefore this conflicting problems should be managed to transmit a high-speed capacity traffic. In this paper, key technologies in DWDM submarine optic network were found out for a high capacity traffic and introduced the dispersion management way for solving the conflicting problems between Zero-dispersion and non-linearity. Lastly designed a dispersion map in section between Korea and Hong-kong.