• Title/Summary/Keyword: 잡음제어

Search Result 807, Processing Time 0.026 seconds

Design of the Voltage Controlled Oscillator for Low Voltage (저전압용 전압제어발진기의 설계)

  • Lee, Jong-In;Jeong, Dong-Soo;Jung, Hak-Kee;Lee, Sang-Young;Yoon, Young-Nam
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2012.05a
    • /
    • pp.699-702
    • /
    • 2012
  • 본 논문에서는 WCDMA(Wide Code Division Multiple Access) 시스템 사양을 만족시키는 주파수 합성기 블록 중 위상잡음 및 전력소모의 최적 설계가 필요한 LC-VCO(voltage controlled oscillator)의 설계를 제안 하였다. 최적 설계를 위한 핵심내용은 LC-tank의 손실성분을 보상하는 MOS트랜지스터의 전달컨덕턴스와 인덕턴스 평면에 여유이득라인과 튜닝 범위 라인을 그어 설계 가능한 영역 내에서 위상잡음이 최소가 되는 인덕턴스 값을 구하고 선택하는 것이다. 제안한 최적 설계방법에 의해 진행된 LC-VCO의 시뮬레이션 결과 위상잡음 특성은 1MHz옵셋에서 -113dBc/Hz였다.

  • PDF

Perceptual Filter Performance Improvement through Estimation of Stationary Static Characteristic Noise (정적 통계적 특성 잡음의 추정을 통한 지각 필터 성능 개선)

  • Seo Joungkook;Ryu Ilhyun;Cha Hyungtai
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.291-294
    • /
    • 2004
  • 본 논문에서는 잡음의 변화(variance)가 없는 정적인 통계적 특성(Stationary Static Characteristic)을 갖는 환경에서 잡음 추정을 통해 지각 필터의 성능을 개선하는 알고리즘을 제안한다. 제안된 잡음 추정 알고리즘은 입력되는 잡음에 열화 된 신호의 묵음 구간에서 추정된 잡음을 이용하여 입력되는 잡음의 SNR을 추정 후, 대역 별로 smoothing 상수 값으로 잡음 에너지를 제어하여 첨가된 잡음을 추정함으로써 초기 추정 잡음 보다 가까운 추정 잡음을 얻을 수 있게 된다. 이는 신호를 열화 시킨 잡음을 보다 정확한 추정을 제공함으로써, 지각 필터의 응답을 개선할 수 있고 더불어 잡음에 의해 열화 된 신호의 음질을 개선할 수 있다. 또한 저 대역에 영향을 미치는 잡음인 경우 다른 방법들과는 달리 음질의 개선이 뚜렷하다. 기존의 방식과 비교를 위해 다양한 신호 대 잡음 비(signal-to-noise ratio, SNR)에서 열화 된 오디오 신호를 입력으로 사용하였다. 입력 SNR이 5dB, 10dB, 15dB와 20dB의 각각의 경우에 대하여 SSNR(Segmental SNR)과 잡음 대 마스킹 비(Noise-to-mask ratio, NMR), 음질 테스트를 수행한 결과, 청감 테스트(Mean Opinion Score, MOS Test) 결과의 향상과 음질개선의 개선을 확인할 수 있었다.

  • PDF

High Frequency Noise Reduction in ECG using a Time-Varying Variable Cutoff Frequency Lowpass Filter (시변 가변차단주파수 저역통과필터를 이용한 심전도 고주파 잡음의 제거)

  • 최안식;우응제;박승훈;윤영로
    • Journal of Biomedical Engineering Research
    • /
    • v.25 no.2
    • /
    • pp.137-144
    • /
    • 2004
  • ECG signals are often contaminated with high-frequency noise such as muscle artifact, power line interference, and others. In the ECG signal processing, especially during a pre-processing stage, numerous noise removal techniques have been used to reduce these high-frequency noise without much distorting the original signal. This paper proposes a new type of digital filter with a continuously variable cutoff frequency to improve the signal quality This filter consists of a cutoff frequency controller (CFC) and variable cutoff frequency lowpass filter (VCF-LPF). From the noisy input ECG signal, CFC produces a cutoff frequency control signal using the signal slew rate. We implemented VCF-LPF based on two new filter design methods called convex combination filter (CCF) and weight interpolation fille. (WIF). These two methods allow us to change the cutoff frequency of a lowpass filter In an arbitrary fine step. VCF-LPF shows an excellent noise reduction capability for the entire time segment of ECG excluding the rising and falling edge of a very sharp QRS complex. We found VCF-LPF very useful and practical for better signal visualization and probably for better ECG interpretation. We expect this new digital filter will find its applications especially in a home health management system where the measured ECG signals are easily contaminated with high-frequency noises .

Low Phase Noise VCO Using the Metamaterial Broadside Coupled Spiral Resonator (메타 구조 Broadside Coupled 나선형 공진기를 이용한 저위상 잡음 전압 제어 발진기)

  • Han, Kyoung-Nam;Seo, Chul-Hun
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.9
    • /
    • pp.961-966
    • /
    • 2009
  • In this paper, a novel voltage-controlled oscillator(VCO) using the metamaterial broadside coupled spiral resonators(BC-DSRs) is presented for reducing the phase noise. For reducing of the phase noise, the series spiral structures have been applied for the signal plane and ground plane at each in order to have the large coupling. Compared with the conventional VCO, the proposed VCO has the larger coupling coefficient constant, which makes a higher Q-factor and has reduced the phase noise of the VCO. The proposed VCO has the phase noise of $-121{\sim}-117.16\;dBc$/Hz at 100 kHz in the tuning range, $5.749{\sim}5.853\;GHz$. The figure of merit(FOM) of this VCO is $-198.45{\sim}-194.77\;dBc$/Hz at 100 Hz in the same tuning range, respectively.

Low Phase Noise Push-Push VCO Using Microstrip Square Open Loop Resonator and Tunable Negative Resistance (마이크로스트립 사각 개방 루프 공진기와 가변 부성 저항을 이용한 저위상 잡음 Push-Push 전압 제어 발진기)

  • Choi, Jae-Won;Seo, Chul-Hun
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.18 no.8
    • /
    • pp.847-853
    • /
    • 2007
  • In this paper, a novel push-push voltage-controlled oscillator(VCO) using microstrip square open loop resonator and tunable negative resistance is presented. The microstrip square open loop resonator has the large coupling coefficient value, which makes a high Q value, and has reduced phase noise of VCO. The VCO with 1.8V power supply has phase noise of $-124.67{\sim}-122.67dBc/Hz\;@\;100 kHz$ in the tuning range, $5.744{\sim}5.859 GHz$. The FOM of this VCO is $-202.83{\sim}-201dBc/Hz\;@\;100 kHz$ in the same tuning range. When it has been compared with single-ended VCO using microstrip square open loop resonator, and push-push oscillator using microstrip line resonator, the reduced phase noise has been -8.51dB, and -33.67dB, respectively.

Design of Engineering Model Oscillator with Low Phase Noise for Ka-band Satellite Transponder (위상잡음을 개선한 Ka-band 위성 중계기용 Engineering Model 발진기의 설계)

  • 류근관;이문규;염인복;이성팔
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.1
    • /
    • pp.74-79
    • /
    • 2002
  • The EM(Engineering Model) VCO(Voltage Controlled Oscillator) is nonlinear designed for LO(Local Oscillator) of Ka-band satellite transponder. The microstripline coupled with dielectric resonator is implemented as a high impedance inverter to improve the phase noise, and the quality factor of resonant circuit can be transferred to active device with the enhanced loaded quality factor. The developed VCO has the oscillating tuning range of 9.7965~9.8032 GHz for the control voltage range of 0~12 V. This VCO requires the DC power of 8 V and 17 mA. The phase noise characteristics are -96.51 dBc/Hz @10 KHz and -116.5 dBc/Hz @100 KHz, respectively. And, the output power of 7.33 dBm is measured.

A Phase-Locked Loop with a Self-Noise Suppressing Voltage Controlled Oscillator (자기잡음제거 전압제어발진기 이용한 위상고정루프)

  • Choi, Young-Shig;Oh, Jung-Dae;Choi, Hyek-Hwan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.8
    • /
    • pp.47-52
    • /
    • 2010
  • In this paper, a phase-locked loop with a self-noise suppressing voltage controlled oscillator to improve a phase noise characteristic has been proposed. The magnitude of the proposed transfer function is maximum 25dB lower than that of a conventional transfer function around a bandwidth. The proposed PLL has been designed based on a 1.8V $0.18{\mu}m$ CMOS process and proved by HSPICE simulation.

Positive role of noise in controlling spatio-temporal chaos (시-공간 혼돈 제어에서의 잡음의 긍정적 역할)

  • 임정구;곽금철;이태용;이만기;임동건;유영훈
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.304-305
    • /
    • 2000
  • 자연계에 존재하는 잡음은 대부분의 경우에 있어서 그 부정적인 면이 부각되어 왔고, 따라서 이를 없애거나 줄이려는 노력들이 이루어져 왔다. 하지만 최근 들어 비선형계에서 나타나는 비선형 공명(stochastic resonance), 특히 생체계에서 이루어지는 정보의 전달에서의 잡음의 긍정적인 역할은 많은 관심을 끌고 있고 많은 연구가 이루어지고 있다[1,2]. 또한 잡음이 비선형 비평형 동역학계의 행동에 영향을 미쳐서 원하는 상태로 이끌어 가거나 원하는 상태를 유지하는데 결정적인 역할을 하는 것이 알려지고 있다[3]. (중략)

  • PDF

Design of Cylindrical Vibratory Gyroscope Controller by DSP (DSP를 이용한 실린더형 진동 자이로스코프 제어기 설계)

  • 김모세;이학성;홍성경
    • Proceedings of the IEEK Conference
    • /
    • 2003.07c
    • /
    • pp.2485-2488
    • /
    • 2003
  • 본 논문에서는 DSP를 이용하여 운동하는 물체의 회전량을 측정하는 실린더형 진동 자이로스코프(이하 자이로) 제어기를 개발하였다. 진동 자이로를 구동하기 위해서는 정밀 진동제어와 신호 처리와 같은 고급 제어 기술이 필요하다. 정밀진동제어는 진동 자이로를 구동하기 위해 필요한 핵심기술로써 기존의 PLL(phase-locked loop)방식은 외부환경에 민감하여 구현이 까다로울 뿐만 아니라 자이로 개개의 고유 진동수가 다르기 때문에 대량 생산에 어려움이 있었다. 또한 자이로 출력 신호로부터 회전량을 검출하기 위해서는 진폭과 당향성 검출의 본 회로뿐만 아니라 잡음 제거와 신호 증폭, 온도 보상과 같은 전처리 과정도 필요하다. 본 논문에서는 DSP를 통해 정밀 진동제어와 잡음 제거, 방향성 검출 등의 기능들을 구현하였으며 증폭과 진폭(회전량) 검출은 아날로그 회로를 이용하였다. 또 한 외부와의 인터페이스를 위해 D/A 회로를 설계하였고 이들을 실험을 통해 검증하였다.

  • PDF

Analysis of Phase Noise in Frequency Synthesizer with DDS Driven PLL Architecture (DDS Driven PLL 구조 주파수 합성기의 위상 잡음 분석)

  • Kwon, Kun-Sup;Lee, Sung-Jae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.11
    • /
    • pp.1272-1280
    • /
    • 2008
  • In this paper, we have proposed a phase noise model of fast frequency hopping synthesizer with DDS Driven PLL architecture. To accurately model the phase noise contribution of noise sources in frequency hopping synthesizer, they were investigated using model of digital divider for PLL, DAC for DDS and Leeson's model for reference oscillator and VCO. Especially it was proposed that the noise component of low pass filter was considered together with the phase noise of VCO. Under assuming linear operation of a phase locked loop, the phase noise transfer functions from noise sources to the output of synthesizer was analyzed by superposition theory. The proposed phase noise prediction model was evaluated and its results were compared with measured data.