• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.300-305
• /
• 2007

The purpose of this study is to examine changes in the residues of procymidone and diazinon in Chwinamul, pepper leaves, and young radish according to drying method. When the three vegetables were dried at room with air stream, the residues of procymidone and diazinon increased, but after being adjusted to reflect the decrease in water content of the vegetables, the residues declined by 10 to 83 percent. When they were dried in a oven, the residues of the pesticides in the vegetables also increased, but after being adjusted to reflect the drop in the water content, the residues decreased by 44 to 71 percent. According to the results, the residues of the pesticides mostly decreased after being adjusted to reflect the drop in the water content of the dried vegetables. Therefore, when judging dried agricultural products not only the decreased water content of dried vegetables but also other factors that affect pesticide residues during the drying process should be considered. This raises the need for additional research on such factors.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.06a
• /
• pp.22-26
• /
• 1998

토양오염 정화방법의 하나인 토양증기추출법(soil vapor extraction, SVE)은 오염된 토양에 진공 또는 가압의 공기를 공급하여 연속적인 공기 흐름을 유도함으로써 토양의 기공에 잔류하는 유해화합물의 증발을 촉진하여 오염물질을 제거하는 공정이다. 본 연구에서는 토양증기추출법의 효율에 영향을 주는 인자들 가운데에서 토양의 수분함량과 오염물질의 종류가 오염물질의 제거효율에 미치는 영향에 대한 실험과 계산을 수행하였다. 인공토양으로 glass bead, sand, molecular sieve가 사용되었으며. 오염물질로는 톨루엔. 메틸에틸케톤, 트리클로로에틸렌이 사용되었다. 각 실험에 대하여 프로인들리히 등온식과 기공확산모델 등을 고려하여 계산을 수행한 결과, 수분이 없는 경우에는 탈착식에 의해, 수분이 있는 경우에는 interparticle에서의 확산 현상에 의해 오염물질의 제거속도가 지배됨을 알 수 있었다. 이러한 연구결과는 정화대상지역에 SVE를 이용한 적절한 정화방법을 설계하는데 기초자료로 이용할 수 있을 것이다.

• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.236-241
• /
• 1977

Analytical method of carbofuran (2,3-dihydro-2, 2-dimethyl-7-benzofuranyl methyl carbamate) residues and its persistence in rice seeds, rice seedlings, rice plants and soils were studied by gas-liquid chromatographic analysis using electron capture detector. 1. The effective column material for clean-up is Florisil (5% $H_2O$)+Alumina (4% $H_2O$)+absorbent mixture with rinsing the first 300l of eluants to remove impurities in the column materials. 2. The method of applying an gelatin encapsulated carbofuran to the root zone of rice plant is the longest persistence in its residues. 3. By seed treatment, no carbofuran residues were detected in rice seeds and seedlings. 4. The amounts of carbofuran residues in rice seedlings is in proportion to the soaking time of rice seedlings in carbofuran solution rather than the concentration of the chemical. 5. Applying carbofuran by root zone has the higher and the loger residual effect than broadcast. 6. Persistence of carbofuran in the high clay content soil is longer than in the low clay content soil. 7. No carbofuran residue was detected in rough rice at havesting time.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.113-119
• /
• 2003

The thermal properties and crystallization behaviors of poly(ethylene terephthalate) (PET) were investigated by controlling the annealing conditions of PET sample, such as relative humidity, temperature, and time. The variations of moisture content, glass transition temperature ($T_g$) and cold crystallization temperature ($T_{\propto}$) were examined after annealing the PET sample. Subsequently crystallization process was performed with the annealed PET specimen, and then the degree of crystallinity and heat distortion temperature (HDT) of variously crystallized PET specimen were examined. Residual stress relaxation in the injection molded PET sample after annealing was also observed through polarized films. Moisture content in the PET specimen increased up to 6000 ppm with increasing the relative humidity, temperature, and time of annealing. $T_g$ and $T_{\propto}$ of the annealed PET specimen decreased with increasing moisture content. The degree of crystallinity increased as increasing moisture content in the PET specimen. However for same moisture content, the degree of crystallinity varied with annealing conditions. The relaxations of residual stress in the PET sample differed from annealing conditions, and the maximum degree of crystallinity increased with decreasing residual stress in the PET sample.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.113.2-113.2
• /
• 2011

동물성 오일을 이용한 바이오디젤 생산 반응 후 미반응된 메탄올과 염기촉매의 처리에 관한 연구로써 바이오디젤의 순도에 영향을 미친다. 메탄올과 염기촉매는 바이오디젤 생산 반응 후 상층인 메틸 에스터 층과 하층인 글리세롤 층에 각각 포함되어 있다. 1차적으로 각각의 층에서 메탄올을 증발하게 되며 메탄올 증발은 감압 증류 장치를 이용해 분리하게 된다. BD100을 기준으로 하여 메탄올의 함량은 0.2% 이하여야 하며 수분 함량은 0.05% 이하를 유지해야 한다. 메탄올 증발은 메탄올의 끓는 온도인 $65^{\circ}C$를 기준으로 하여 끓는점 보다 낮은 온도와 높은 온도에서 각각 증발을 실시하고 각각의 메탄올 증발 제거에 따른 FAME 함량에 미치는 영향에 대해 FAME 함량 분석을 통해 조사하였으며 메탄올 증발 후 증류수를 이용한 바이오디젤 내 잔류 촉매 및 자유 글리세린 세정 제거에 대해 조사하였다. 증류수 양과 증류수 온도 및 세정 시간에 따른 FAME 함량 변화를 알아보았으며 세정 후 증류수 증발에 따른 FAME 함량 변화에 대해서 분석을 실시하였다. 본 실험을 통해 동물성 오일을 이용한 바이오디젤 생산 후처리 공정인 메탄올 증발 및 세정, 수분 증발 공정의 최적 조건을 도출하고자 하였다.

• Culinary science and hospitality research
• /
• v.12 no.4 s.31
• /
• pp.131-139
• /
• 2006

This study carried out the standardization of processing conditions in mustard powder (MP) for quality improvement and suggested a recycling scheme of mustard oil(MO). Pungent taste in MP and MO was estimated using allylisothiocyanate (AITC) content as a marker. Recovery of crude oil from mustard seed (MS) was best by the cold pressing method. Residual AITC content at $30^{\circ}C$ pressing was 0.54% and 0.42% at $230^{\circ}C$. But residual AITC contents in MOs were 92ppm, 139ppm, respectively. The residual AITC content in MP was the highest (0.54%) when the moisture content in MP was 4.5%. The residual content of volatile oil in MP and MO showed similar results. In summary, crude oil must be removed from MS using the cold pressing method.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.1
• /
• pp.28-44
• /
• 1995

Residue level of myclobutanil[2-p-chlorophenyl-2-(1H-1,2,4-trizol-l-yl-methyl) hexane nitril] and number of soil microorganism were investigated at different environmental conditions such as the sterile and the non-sterile soils, moisture content, pH, temperature, application rate, and soil types under laboratory and field to study the effect of those factors on degradation characteristics of this fungicide and change of microflora in soil. Decomposition rate of myclobutanil was 3.9 times faster in the non-sterile soil than in the sterile soil, 1.6 times in the field than in the laboratory, 1.4 times in the concentration of 10ppm than in that of 20ppm, and 1.2 times in the clay loam soil than in the silty loam soil. Degradation rate of myclobutanil was the fastest at pH 9.0 among the tested pHs and the latest at pH 5.5. Degradation rate of myclobutanil was in order of $27^{\circ}C$ > $37^{\circ}C$ > $17^{\circ}C$. Otherwise, the effect of soil water content on myclobutanil degradation was found not clear. Number of microorganism in the non-sterile soil was remarkedly more than that in the sterile soil. Numbers of microbes were not significantly different between treatment plot and non-treatment plot of myclobutanil at the different conditions of soil moisture content, pH, temperature and soil type. Numbers of fungi and total microbes were more in the treatment than in the non-treatment of myclobutanil at field test but the same trends were not found at laboratory test. Within non-treatment of myclobutanil, numbers of microbes were not significantly different under the various condition of pH, application rate, and soil type in laboratory and upland field. The number of bacteria were more in 60% moisture content of water holding capacity than in 40% and the number of fungi were more in $17^{\circ}C$ of soil temperature than in $37^{\circ}C$. Within the application plot of myclobutanil, numbers of microbes were not significantly different at various pH in laboratory and upland field. The number of bacteria and total microbes were more in 80% moisture content of water holding capacity than in 40% and 60% and actinomycetes were more at $27^{\circ}C$ in the clay loam soil than at $17^{\circ}C$ in the silty loam soil.

• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.182-187
• /
• 2003

In order to elucidate a degradation characteristics of herbicide mefenacet in soil, the persistence in soils was studied under laboratory conditions for $90\sim120$ days at $28^{\circ}C$. Mefenacet residues were determined from the two soils which pre-treated by sterilization and flooding, respectively. Non-sterilized upland soil was used as a control. When 70 days elapsed from application time, $55\sim63%$ of mefenacet applied were dissipated in control soils. However, $32\sim33%$ of mefenacet applied were dissipated in the sterilized soils and $33\sim35%$ was dissipated in the flooded soils. 까 lese results indicated that the degradation of mefenacet was assumed to be due to microorganism, especially aerobic microbes. In order to elucidate the influence of water content on the persistence of mefenacet in soil, water content in soils was adjusted to 20, 50, and 80% of the water-holding capacity(Field capacity, WHC). The half-life of mefenacet in soil containing 20% and 50% of WHC were 82 and 73 days, respectively, after incubation for 90 days. However, the half-life in soil containing 80% of WHC was shortened to 61 days. These results indicated that degradation of mefenacet in soil was influenced by the activity of soil microorganism, organic matter content and water content.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.237-242
• /
• 2022

In this study, a drying method that can effectively remove residual solvent from (+)-dihydromyricetin was developed. Residual acetone concentration was efficiently removed below ICH-specified value (5,000 ppm) by simple rotary evaporation with ethanol pretreatment. In addition, the residual ethanol met the ICH-specified value (5,000 ppm) by simple rotary evaporation through the addition of water, and the residual moisture also met the specified value (<4%) for active pharmaceutical ingredients. At all the drying temperature (35, 45, and 55 ℃), a large amount of the residual solvent was initially removed during the drying, and the drying efficiency increased when increasing the drying temperature. Removal of residual solvent by ethanol pretreatment was shown to be related to high vapor pressure of acetone-ethanol mixture and hydrogen bonding between acetone and ethanol.

• Journal of Aquaculture
• /
• v.8 no.4
• /
• pp.271-283
• /
• 1995

Blue tilapia, Oreochromis aureus (Steindachner) swim-up fry were fed a ration containing 0, 1, 10, or 60 ppm $17\alpha-Methyltestosterone$ (MT) for 30 days (sex reversal period). Fish that had been fed 0 ppm MT-treated feed during the sex reversal period were subsequently fed rations containing either 0 ppm MT, 10 ppm MT, or 60 ppm MT for the next 39 days (post sex reversal period) : fish that had been fed 60 ppm MT-treated feed during the sex reversal period were subsequently fed rations containing either 0 ppm MT, 10 ppm MT, or 60 ppm MT during the post sex reversal period. One group was fed 1 ppm MT-treated feed, while another group was fed 10 ppm MT-treated feed during both periods. The following growing season (10 months later), the residual effects of MT on weight gain, body composition, and gonosomatic indices (GSI) were evaluated. MT had no residual effect on growth of either sex. Groups that ate MT-treated feed were significantly (P<0.05) larger than those that received no MT during the sex reversal period, because females in the latter group lowered average weight gain. MT had a positive residual effect on body fat content in males, but had a negative effect on body moisture content. MT had a positive residual effect on body moisture content in females. MT had a significant negative effect on male and female GSI at the end of the post sex reversal period. MT consumption during the sex reversal period had a significant negative residual effect on male GSI. MT fed after sexual development (post sex reversal period) did not have a residual effect on male or female CSI.