• Journal of Mushroom
• /
• v.16 no.1
• /
• pp.31-38
• /
• 2018

This study investigated the synergistic effect of single inoculation and co-inoculation of phosphate-solubilizing bacteria (PSB) Pantoea rodasil LH-1and Burkholderia stabilis HS-7. Phosphate-solubilizing abilities of these strains were assessed by measuring phosphorus content in culture media that were singly inoculated or co-inoculated with these strains for 7 days. The co-inoculation of P. rodasil LH-1and B. stabilis HS-7 was found to release the highest content of soluble phosphorus ($783.41{\mu}g\;mL^{-1}$) into the medium, followed by single inoculation of B. stabilis HS-7B ($743.90{\mu}g\;mL^{-1}$) and P. rodasil LH-1 ($736.59{\mu}g\;mL^{-1}$). The highest pH reduction, organic acid production, and glucose consumption were also observed in the medium inoculated with both the strains, compared with that in the medium inoculated with the strain alone. Results of a plant growth promotion bioassay showed 7.7% and 15.5% higher leaf and root growth, respectively, in romaine lettuce co-inoculated with P. rodasil LH-1and B. stabilis HS-7 than those inoculated with the strain alone. However, no significant difference was observed between single inoculation and co-inoculation of these strains with respect to phosphorus release and plant growth. Although the results of the present study did remarkdly not show the synergistic effect of phosphate solubilization by co-inoculation of the PSB strains examined, these results indicate that treatment with PSB exerts a beneficial effect on crop growth.

• Radiation Oncology Journal
• /
• v.17 no.2
• /
• pp.136-140
• /
• 1999

Purpose : Prostate specific antigen (PSA) is a useful tumor marker, which is widely used as a diagnostic index and predictor of both treatment and follow-up result in prostate cancer. A prospective analysis was carried out to obtain the period of PSA normalization and the half life of PSA and to analyze the factors influencing the period of PSA normalization. The PSA level was checked before and serially after radical radiotherapy. Materials and Method : Twen쇼 patients with clinically localized prostate cancer who underwent radical external beam radiotherapy were enrolled in this study. Accrual period was from April 1993 to May 1998. Median follow-up period was 20 months. Radiotherapy was given to whole pelvis followed by a boost to prostate. Dose range for the whole pelvis was from 45 Gy to 50 Gy and boost dose to prostate, from 14 Gy to 20 Gy. The post-irradiation PSA normal value was under 3.0 ng/ml. The physical examination and serum PSA level evaluation were performed at 3 month interval in the first one year, and then at every 4 to 6 months. Results : PSA value was normalized in nineteen patients (95%) within 12 months. The mean period of PSA normalization was 5.3 (${\pm}$2.7) months. The half life of PSA Of the nonfailing patients was 2.1 (${\pm}$0.9) month. The nadir PSA level Of the nonfailing Patients waS 0.8 (${\pm}$0.5) ng/ml. The period of PSA normalization had the positive correlation with pretreatment PSA level (R$^{2}$=0.468). The nadir PSA level had no definite positive correlation with the pretreatment PSA level (R$^{2}$=0.075). The half life of serum PSA level also had no definite correlation with pretreatment PSA level (R$^{2}$=0.029). Conclusion :The PSA level was mostly normalized within 8 months (85%). If it has not normalized within 12 months, we should consider the residual disease in prostate or distant metastasis. In 2 patients, the PSA level increased 6 months or 20 months before clinical disease was detected. So the serum PSA level can be used as early diagnostic indicator of treatment failure.

• Applied Biological Chemistry
• /
• v.8
• /
• pp.101-111
• /
• 1967

Daily doses of phenylmercuric acetate arranged in $30{\gamma}\;(group\;I)$, 3{\gamma}\;(group\;II)$ and $0.3{\gamma}\;(group\;III)$ were administered respectively to rabbits for 90 days. The chief histopathological changes in the organs and the analytical data on mercury residues in the excretion and liver were as follows. 1. Kidney: In group I, severe degrees of vacuolization and cloudy swelling were occurred in the epithelial cells of proximal convoluted tubules and severe cloudy swelling and coagulative necrosis were observed in the proximal straight tubules. There were many hyaline casts in the collecting tubules. In group II, moderate degrees of vacuolization and cloudy swelling were observed in the epithelial cells of proximal convoluted tubules and moderate cloudy swelling and coagulative necrosis were encountered in the proximal straight tubules. A little numbers of hyaline casts were located in the lumen of collecting tubules. In group III, slight degree of cloudy swelling were observed in the epithelial cells of proximal convoluted and straight tubules. 2. Liver: In group I, cloudy swelling, fatty changes and coagulative necrosis were observed in the central zone of hepatic lobules. Dissociation of hepatic cell cords was encountered. Hyperplsia of hepatic cells were remarkable in group II. No Pathological changes were observed in group III. 3. Spleen: Deposition of hemosiderin pigment was prominant in group I and small amount of the pigment was observed in group II. There were no pathological changes in group III. 4. Adrenal, colon and heart: No pathological changes were detected in all 3 groups. 5. In an average about 76.5% of mercury was excreted from group I, 85.4% from group II and 79.8% from group III. 6. Mercury content in the liver was 0.0348 g in group I, 0.00378 g and 0.00066 g in group II and group III respectively. 7. In general, as to increased mercury doses the concentration of mercury accumulation in the liver became higher, how·ever, the accumulation quantity against a total amount of mercury doses showed an adverse trend. In other word, the quantity of mercury accumulation was not increased proportionately by higher dose of mercury.

• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.77-81
• /
• 1998

By standardized method, Bacillus subtilis BGA, Bacillus cereus var. mycoides ATCC 11778, and Micrococcus luteus ATCC 9341 were seeded on the muller hinton agar (Difco) plate, and pH was adjusted to 6.0, 7.2, and 8.0. Five agar plates, B. subtilis (pH 6.0), B. cereus (pH 6.0), B. subtilis (pH 7.2), B. subtilis (pH 8.0), and M. luteus (pH 8.0), were employed as test plates of modified EEC 4-plate method. Oxytetracycline (OTC) with a diet was orally administered to flounder, Paralichthys olivaceus, at 100 mg/kg once a day. After oral administration, modified EEC 4-plate method by the three screening test using muscle-direct, extraction-disk and direct-disk methods was conducted for 3 fish at 1, 3, 5, 10, 15, 20, 25 and 30 days. Muscle-direct treatment of B. subtilis (pH 6.0) was found to be dubious positive (${\pm}$) at the 1st day after the administration; thereafter, it was found to be negative to the last day of the experiment. Extraction-disk and direct-disk treatment of B. subtilis (pH 6.0) were found to be negative from the 1st day to the last day after the administration. B. subtilis (pH 7.2), B. subtilis (pH 8.0), and M. luteus (pH 8.0) by the three screening tests, were found to be negative all the way after the administration. On the other hand, B. cereus (pH 6.0) by the three screening tests was clearly found to be positive for the first 15 days after the administration, and then muscle-direct and direct-disk treatment of B. cereus (pH 6.0) were found to be dubious positive at 20th days after the administration. However extraction-disk treatment of B. cereus (pH 6.0) was clearly found to be negative at the same stage; thereafter, the three screening tests of B. cereus (pH 6.0) were found negative to the last of the experiment. These findings showed that to have equal sensitivity to those determination for the residual detection of OTC, and also confirmed that B. cereus was effective test organism for the monitoring of OTC.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.147-161
• /
• 2012

This study is to assess the effect of horizontal misfit of an implant supported 3-unit fixed prosthodontics on the stress development at the marginal cortical bone surrounding implant neck. Two finite element models consisting of a three unit fixed prosthodontics and an implant/bone complex were constructed on a three dimensional basis. The three unit fixed prosthodontics were designed either shorter (d=17.8mm model) or longer (d=18.0mm model) by 0.1mm than the span of two implants placed at the mandibular second premolar and second molar areas 17.9mm apart. Fitting of the fixed prosthodontics onto the implant abutments was simulated by a total of 6 steps, that is to say, 0.1mm displacement per each step, using DEFORM 3D (ver 6.1, SFTC, Columbus, OH, USA) program. Stresses in the fixed prosthodontics and implants were evaluated using von-Mises stress, maximum compressive stress, and radial stress as necessary. The d=17.8mm model assembled successfully on to the implant abutments while d=18.0mm model did not. Regardless if the fixed prosthodontics fitted onto the abutments or not, excessively higher stresses developed during the course of assembly trial and thereafter. On the marginal cortical bone around implants during the assembly, the peak tensile and compressive stresses were as high as 186.9MPa and 114.1MPa, respectively, even after the final sitting of the fixed prosthodontics (for d=17.8mm model). For this case, the area of marginal bone subject to compressive stresses above 55MPa, equivalent of the $4,000{\mu}{\varepsilon}$, i.e. the reported threshold strain to inhibit physiological remodeling of human cortical bone, extended up to 2mm away from implant during the assembly. Horizontal misfit of 0.1mm can produce excessively high stresses on the marginal cortical bone not only during the fixed prosthodontics assembly but also thereafter.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.135-143
• /
• 2015

This study evaluated fuel properties of composite materials which were prepared by mixing a waste activated carbon from the used purifier filter with torrefied wood powder. Wood species of the raw material of torrefied wood powder are oak wood (Quercus serrata Thunb. ex Murray) and pine wood (Pinus densiflora Siebold & Zucc). And the treatment conditions used for this study were 300 s, 450 s, and 600 s at $200^{\circ}C$ for the wood roaster. Also, the mixing ratios are 5 : 95, 10 : 90, 15 : 85, 20 : 80, 40 : 60, 60 : 40 and 80 : 20 (waste activated carbon : torrefied wood powder). The fuel properties such as highly heating value (HHV), elementary analysis and ash content were evaluated. The results obtained are followings; 1. Despite the same treatment condition of wood roasting, pine wood has higher carbon contents than oak wood. Therefore, pine wood indicated the optimum carbonization at low temperature and short treatment times. 2. The gross calorific value and ash content increased as the mixing ratio of waste activated carbon increased. 3. Mixtures of the waste activated carbon and torrefied wood powder showed greater gross calorific value than those of the mixtures of waste activated carbon and the untreated wood powder. Also, the pine wood resulted in higher heating value that thaose of the oak wood. 4. When composite fuels that were composed waste activate carbon and wood powder are used, higher temperature conditions are required because the combustion is incomplete at $800^{\circ}C$ and 4 hours. 5. The increasing rate of the gross calorific value of mixtures of waste activated carbon and untreated wood powder is higher than does the mixtures of waste activated carbon and torrefied wood powder. Also, this phenomenon is more obvious for pine woods. Therefore, an optimal mixing ratio of waste activated carbon was determined to be between 5% and 10% (wt%). Also, this condition satisfied the requirement of the No.1 grade of wood pellet.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.153-157
• /
• 2017

This study was conducted to investigate the physicochemical characteristics, antioxidant capacities of Phellinus linteus and Ganoderma lucidum commercial tea products. The physicochemical characteristics included pH, Hunter's color values, soluble solid contents, evaporation residues, and ${\beta}$-glucan contents. The antioxidant capacities were measured by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities, ferric reducing antioxidant power (FRAP), and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activities, total phenolic contents (TPC), and total flavonoid contents (TFC). The pH, soluble solid contents, evaporation residues, and ${\beta}$-glucan contents were in the range of 4.43-7.05, $0.40-0.73^{\circ}Brix$, 62.04-258.84 mg/100 g, and 15.51-62.32 mg%, respectively. Hunter's color values (L, a, and b) indicated 41.76-55.02, -0.49-5.06, and 17.41-28.32, respectively. The antioxidant capacities showed $32.63-367.81{\mu}M$ GAE (DPPH radical scavenging activities), $321.86-1,035.19{\mu}M$ TE (FRAP), $703.50-1,091.83{\mu}M$ (ABTS radical scavenging activities), $286.56-916.00{\mu}M$ (TPC), and $85.33-635.33{\mu}M$ (TFC). Overall, P. linteus liquid tea 2 (PL2) and G. lucidum liquid tea 1 (GL1) showed high antioxidant capacities (p<0.05). The TPC and TFC were highly correlated with DPPH radical scavenging activities, FRAP, and ABTS radical scavenging activities (r=0.7298-0.9743), but the ${\beta}$-glucan contents were not correlated well with antioxidant activities tested (r=0.3146-0.6663).

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.2
• /
• pp.178-183
• /
• 1993

This study was carried out to investigate the contents of ash and inorganicelements in the herbaceous paeony roots collected from the markets of 9 regions in Korea. The contents of paeoniflorin ranged from 2.14% to 3.7%, and the average was 2.87%. The mean contents of ash was 4.2% and acid insoluble ash content was 0.55%. Total nitrogen of herbaceous paeony roots was 0.7%, phosphorus 0.69%, potassium 0.73%, calcium monoxide 1.02% and ferric oxide 82.15ppm respectively. The content of zinc ranged from 19.80ppm to 103.02ppm and the average was 34.59ppm ; this value showed some differences than other elements were, and the mean content of magnesium was 0.25%. The cadmium content showed 0.31ppm copper 4.95ppm, and plumbum 20.47ppm respectively. As above results, we could say that there was no health problems with local products, if we use a the herb medicine.

• Journal of fish pathology
• /
• v.22 no.2
• /
• pp.125-135
• /
• 2009

The pharmacokinetic properties of oxolinic acid (OA) were studied after oral administration, intraperitoneal injection and dipping to cultured olive flounder, Paralichthys olivaceus (average 90 g, $23{\pm}1{^{\circ}C}$). Plasma samples were taken at 3, 5, 10, 15, 24, 30, 48, 96 and 144 h post-dose. In oral dosage at 15, 30 and 60 ㎎/㎏, the peak plasma concentrations of OA, which attained at 10~15 h post-dose, were 1.92, 2.45 and 3.72 $\mu{g}/m\ell$, respectively. In intraperitoneal injection with 10 and 20 ㎎/㎏, the peak plasma concentrations of OA, which attained at 10 h post-dose, were 4.1 and 4.8 $\mu{g}/m\ell$, respectively. In dipping in 30 and 50 ppm for 1 h, peak concentrations were observed at 5 h and 30 h post-dose, were 0.22 and 0.38 $\mu{g}/m\ell$, respectively. The kinetic profile of absorption, distribution and elimination of OA in plasma were analyzed fitting to a one-compartment model by WinNonlin program. Calculated parameters for a single oral dosage of 15, 30 and 60 ㎎/㎏, respectively, were: AUC (the area under the concentration-time curve)=70.93, 120.0 and 141.86 $\mu{g}$ $h/m\ell$ $T_{max}$ (time for maximum concentration)=16.22, 20.39 and 17.33 h; $C_{max}$ (maximum concentration)=���D1.61, 2.40 and 3.01 $\mu{g}/m\ell$. Following intraperitoneal injection of 10 and 20 ㎎/㎏, these parameters were AUC=184.7 and 315.92 $\mu{g}$ $h/m\ell$ $T_{max}$=5.91 and 6.26 h; $C_{max}$=4.19 and 4.45 $\mu{g}/m\ell$. Following dipping at 30 and 50 ppm, these parameters were AUC=17.58 and 21.69 $\mu{g}$ $h/m\ell$ $T_{max}$=19.08 and 31.43 h; $C_{max}$x=0.22 and 0.25 $\mu{g}/m\ell$.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.221-227
• /
• 2002

Column experiments were performed to evaluate the removal efficiency of soil vapor extraction (SVE) iota TCE (trichloroethylene) and toluene in soil. Homogeneous Ottawa sands and real soils collected from contaminated area were used to investigate the effect of soil properties and SVE operation conditions on the removal efficiency. In column teats with two different sizes of Ottawa sand, the maximum effluent TCE concentration in a coarse sand column was 442 mg/L and 337 mg/L in a fine sand column. However, after 20 liter gas flushing, the effluent concentrations were very similar and more than 90% of initial TCE mass were removed from the column. For two real contaminated soil columns, the maximum effluent concentration decreased 50% compared with that in the homogeneous Ottawa coarse sand column, but 99% of initial TCE mass were extracted from the column within 40 liter air flushing, suggesting that SVE is very available to remove volatile NAPLs in the contaminated soil. To investigate the effect of contaminant existing time on the removal efficiency, an Ottawa sand column was left stable for one week after TCE was injected and the gas extraction was applied into the column. Its effluent concentration trend was very similar to those for other Ottawa sand columns except that the residual TCE after the air flushing showed relatively high. Column tests with different water contents were performed and results showed high removal efficiency even in a high water content sand column. Toluene as one of BTEX compounds was used in an Ottawa sand column and a real soil column. Removal trends were similar to those in TCE contaminated columns and more than 98% of initial toluene mass were removed with SVE in both column.