• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.209-212
• /
• 2018

Anisotropic conductive film(ACF) bonding is widely used for making fine interconnections between two different materials where soldering is not easily applicable. There are three constraints for the successful implementation of ACF bonding. A bonding contact should be pressed by a hot head with the right pressure and temperature for a pre-defined curing time. In this paper, a method for ACF bonding based on machine vision system is proposed and verified through some experiments. The system calculates the position and orientation of printed circuit boards(PCBs) on a bonding table and estimates the optimal hitting point where the hot head should be applied. Experimental results show that the proposed system achieves better adhesive strength by providing head flatness over contact surfaces.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.4
• /
• pp.167-178
• /
• 2004

The purpose of the study is to identify the degree of relevancy on the facilities for the older persons in the public library buildings. To achieve the purpose, the study has researched and analyzed' the guidelines of the law contributing to the convenience of the handicapped, older persons, pregnant women etc(1999)' for the older persons accessing to the facilities in the public library buildings. And then, the older persons' physical standard sizes in 'Size Korea(1997)' are researched and reconfigured. The study has selected the 10 kinds in such facilities as followed : Door, Accessible Route, Stair, Elevator, Escalator, Ramp, Toilet Stall, Urinal, Table, and Post Box. As the result, the study has identified the relevancies of each facilities based on the older persons's physical standard sizes.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.745-750
• /
• 2009

In Korea, since the implementation of the GMO Law, the intrest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. was performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab.(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios was performed in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.171-179
• /
• 2011

Facing the current hikes of labor wage and high oil price, it is needed to have energy-saving machinery which also enables us precise farm operations. Thus, it was necessary to develop a safe machine which allows secure and pleasant works along orchard slopes. In this study, a lifting utility with balance-controlled platform was developed. The platform utility could maintain to level the workbench while driving along slopes. Even the machine body was driven at the tilt angle ranges of ${\pm}20^{\circ}$, the platform bench could be maintained within ${\pm}0.5^{\circ}$ of a gimbal angle. In addition, the machine lifted up to 2.0 m using an electric-hybrid driving mechanism with a low noise. A tandem hybrid power source was developed with a DC 72 V, 100 AH for the Deep-Cycle batteries, charged with 3.5 kW gasoline generator as an auxiliary power source. HST, which is one of the CVT's, was adopted as a transmission device, and a crawer track was used for the safety of the vehicle against tip-over. The maximum lifting height of platform was is 2,500 mm, and the maximum extendable width was 2,900 mm.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.671-677
• /
• 2009

In Korea, since the implementation of the LMO Law, the interest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. is performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab,(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios is carried out in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2003

A novel Solid Freeform Fabrication System, which makes prototype by cutting tapes at the boundary of object and accumulating the tapes, has been developed. In order to overcome the staircase shape at the surface of prototype, the laser beam is irradiated tangent to the surface. Five axis cutting system and the tangent cutting trajectory generation algorithm have been developed.

• Journal of Conservation Science
• /
• v.11 no.1 s.14
• /
• pp.52-57
• /
• 2002

Although a conservation laboratory is a kind of hospital for cultural assets, it is often planned on the standard of ordinary offices. In this study, things and conditions to be considered for a new conservation laboratory were discussed and suggested briefly, for the sections of architecture, electricity and lightning, air condition, fire protection, machinery and tools. As methods of creating a workspace adequate to conservation work, the method of dividing workspace on the basis of workstand and the method of placing machinery and tools on the basis of water supply and sewage systems were explained., Because a conservation laboratory varies in its duties and functions, it seems difficult that all the standards and conditions suggested in this study be fulfilled in every case. But understanding general standards and conditions and choosing ones adequate to special functions of each laboratory will be helpful to planning a new conservation laboratory.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.1051-1054
• /
• 2005

On this study, we optimized minimizing the characteristic function for mixed result of the structural contact analysis and the buckling analysis according to the pin jig initial model's level change using mixed the table of orthogonal away and ANOM, Pin jig's weight is reduced up to 20 percent considering constraint conditions. Also we optimized reducing 20 percent weight of pin jig model using topology optimization.

• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.9-17
• /
• 2023

In this study, we aimed to identify the important hazard factors and determine their criticality in causing serious accidents in vehicle-mounted mobile elevated work platforms (MEWPs). Fuzzy failure modes and effects analysis (FMEA)was performed using accident data and a survey of experts. To determine the hazard factors, the accident data for the last 10 years were used and a questionnaire survey was designed. The questionnaire survey was sent to four experts in the field of occupational safety to determine the severity, occurrence, and detectability of serious accidents in MEWPs. Furthermore, objective RPN scores and risk priority were obtained using fuzzy FMEA. Finally, the criticality of hazard factors in descending order was found to be overloading, non-installation or defective installation of outriggers, breakage due to wire rope aging, and illegal remodeling of vehicle structures. The results were verified by comparing the occurrence data of serious disasters.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.69-77
• /
• 1991

A collision-free trajectory planning algorithm using an iterative learning concept is proposed for dual robot arms in a 3-D common workspace to accurately follow their specified paths with constant velocities. Specifically, a collision-free trajectory minimizing the trajectory error is obtained first by employing the linear programming technique. Then the total operating time is iteratively adjusted based on the maximum trajectory error of the previous iteration so that the collision-free trajectory has no deviation from the specified path and also that the operating time is near-minimal. To show the validity of the proposed algorithm, a numerical example is presented based on two planar robots.