• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.1
• /
• pp.68-71
• /
• 2005

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.12
• /
• pp.26-34
• /
• 2001

흡수식 사이클에 이용되는 이성분 혼합물인 암모니아/물의 작동유체로 하는 상온에너지의 장거리수송 및 변환기술을 소개한다.

• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.27-35
• /
• 2017

The amount and quality of waste heat from a resource recovery facility were measured. The temperature of exhaust gas was $176.6^{\circ}C$ and the amount of that was 13.8 kg/s. This research designed a waste heat recovery system whose working fluid is R-245fa. It simulated three study cases as follows. In simulation of a basic ORC system, the turbine power output and thermal efficiency were respectively 96.56 kW, 14.3%. In simulation of a superheater connection, 0.09% of efficiency could be improved due to the increase of enthalpy by overheating of working fluid, but the obtained output was decreased with 16.58kW because of the decrease of working fluid mass. In simulation of a process heater connection, efficiency was increased up to 38.51%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.589-596
• /
• 2016

Recently organic flash cycle (OFC) has been proposed which is a vapor power cycle where heat addition occurs with the working fluid remaining in the liquid state. This study proposes a modified OFC with regeneration and carries out thermodynamic performance analysis of the system utilizing low-temperature heat source in the form of sensible energy. Effects of working fluid and flash temperature are systemically investigated on the system performance such as net power production and thermal efficiency. Results show that the net power production has a peak value with respect to the flash temperature but the thermal efficiency increases with the flash temperature. The regenerative system shows higher thermal efficiency compared to the original OFC and improved potential for recovery of low-temperature heat sources.

• Solar Energy
• /
• v.17 no.4
• /
• pp.23-33
• /
• 1997

In this paper, performance of various working fluids is evaluated for the closed Ocean Thermal Energy Conversion(OTEC) power plant operating on Rankine cycle. The evaporator and condenser are modeled via UA and LMTD method while turbine and pump are modeled by specifying isentropic efficiencies. R22, Propane, Propylene, R134a, R125, R143a, R32, R410A and Ammonia are used as working fluids. Results show that newly developed fluids such as R410A and R32 that do not cause stratospheric ozone layer depletion perform as well as R22 and ammonia. The superheat at the evaporator exit and subcooling at the condenser exit do not affect the performance of the simple OTEC power cycle. Turbine efficiency and heat exchanger size influence greatly the performance of the Rankine cycle. Finally, it was shown that closed OTEC power plants can practically generate electricity when the difference in warm and cold sea water inlet temperatures is greater than $20^{\circ}C$.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.114-119
• /
• 1996

증기방출계통은 원자력 발전소의 안전을 위한 계통인데 이 계통의 작동 초기에 복잡한 열유체적 현상과 더불어 큰 유체적 진동하중이 구조물에 발생하게 됨으로 이 계통의 설계 개발을 위하여는 이러한 초기현상에 대한 정성적 및 정량적인 이해가 요구된다. 이를 위하여 본 연구에서는 이러한 초기 현상을 해석할 수 있는 방법론을 개발하고 이를 이용하여 이 현상의 특성을 분석하였으며 종합적으로 유체적 진동 하중으로부터 구조물의 기계적 건전성을 확보하기 위한 이 계통의 설계 방향을 제시하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.249-253
• /
• 1995

본 연구에서는 잠재적 응용성이 큰 ER유체와 압전필름을 액튜에이터로 하는 하이브리드형 지능구조물을 제안한 후 능동 진동제어를 실시하였다. 먼저 중공(hollow)의 샌드위치 형태 복합재료(glass/epoxy)보에 ER유체와 압전필름을 각각 삽입과 접착을 하여 하이브리드형 지능구조물을 제작하였다. 그리고 각 매체의 액튜에이팅 특성을 고려하여, ER유체 액튜에이터(ERFA)는 전장부하 함수로 도출되는 구조물의 주파수응답을 특징으로 하였고, 압전필름 액튜에이터(PFA)는 신경 슬라이딩 모드 제어기 (neuro sliding mode controller : NSC)를 적용하였다. 이 두 액튜에이터가 동시에 작동하는 능동 진동제어계를 실험적으로 구현한 후 과도응답과 강제 응답에 대한 진동제어 성능을 단일 액튜에이터 작동시와 비교 고찰하여 제시된 하이브리드 액튜에이팅의 효과를 입증하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.234-241
• /
• 1999

본 논문에서는 얇은 직사각형 단면 형상을 가지는 세 가지 서로 다른 유동로 안에서 움직이는 공기버블의 변형 거동에 대한 실험을 수행하였다. 압력 차이로 유체는 유동되며, 유동장을 따라서 변형하는 버블의 정상상태 모양을 관찰하였다. 벽면효과를 알아보기 위해 세 종류의 얇은 사각단면을 사용하였으며, 두 가지 종류의 작동 유체, 버블의 초기 크기, 작동 유체의 유량 등을 변화시켰을 때 이에 대한 공기 버블의 변형을 체계적으로 관찰하고 이들의 관계를 고찰하였다. 실험데이타를 정량화하여 캐필러리 수에 대한 버블의 무차원 속도비와의 관계를 상세하게 고찰하였다. 글리세린의 경우는 항상 버블 선단부의 곡률이 후단의 곡률보다 더 작게 나타났으며 실리콘 오일의 경우와 반대 경향이 관찰되었다. 두 경우 모두 캐필러리 수에 대한 속도비와 세장비 값은 1 보다 큰 값을 가졌다. 실리콘 오일의 경우는 주어진 Ca 수에 대하여 속도비가 글리세린의 경우보다 더 크게 나왔으며 버블 크기에 따른 속도비 분산도가 더 조밀하게 나타났다. 사각 단면 폭이 감소할수록 벽면 효과는 증대되었으며 같은 폭에 대해서는 버블 변형이 축소관의 경우가 가장 크게 나타났다.

• Plant Journal
• /
• v.10 no.2
• /
• pp.38-47
• /
• 2014

Renewable Portfolio Standards was introduced into the system in Korea in 2012. Interest in the unutilized and renewable energy sources is increasing. and these being actively investigated. An organic rankine cycle has emerged as an alternative in order to take advantage of bio-gas engine heat of sewage treatment plants whose capacity is 1500 kW. The organic rankine cycle power system was simulated by a simulator which is a commercial program of power plant design and performance analysis. The biogas engine is operated by $460^{\circ}C$ and 2.7 kg/s flow rate in the sewage treatment plant. Working fluids(R-601a, R-123, R-245fa) are selected to use in ORC power system in this temperature range. It was the isopentane that is the best performance among three working fluids. It could be obtained net power of 163.1 kW and efficiency of 13.66% from isopentane in the simulation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.2
• /
• pp.116-121
• /
• 2014

In order to study the improvement of the multi stage regeneration cycles, muti-stage processes were applied to the cycles, respectively or together. The kinds of the cycles are multi stage reheater cycle (MS) and multi stage reheater regeneration cycle (MSR). Working fluid used was R134a and R245fa. Temperature of the heat source was $65^{\circ}C$, $75^{\circ}C$, and $85^{\circ}C$, and temperature of the heat sink was $5^{\circ}C$. Optimization simulation was conducted for improving the gross power and efficiency with multi stage reheater regeneration cycle for ocean thermal energy conversion(OTEC) with changing of a heat source, kind of the working fluid, and type of the cycle. Performance analysis of the various components was simulated by using the Aspen HYSYS for analysis of the thermodynamic cycle. R245fa shows better performance than R134a. This paper showed the most suitable working fluid with changing of a heat source and the kinds of working cycle. Compared to each other, MS showed better performance at gross power and MSR showed higher cycle efficiency.