• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.185-190
• /
• 1995

Rare earth-aluminum intermetallic compounds $RAI_{2}$ (R ; Lu, Ce, Gd) are prepared by the arc-melt method and the magnetic properties and electronic structures are investigated by magnetic susceptiptibiliy measurements using SQUID magnetometer. The magnetic suceptibiliyof $LuAl_{2}$ is weakly temperature dependent and shows a Pauli susceptibility of $10.1{\times}10^{-5}$ emu/mol, which means 3.2 states/eV/formula unit. On the other hand, the susceptibility data of $CeAl_{2}$ and $GdAl_{2}$ show a Curie-Weiss behavior for paramagnets. The magnetization data at low temperatures confirm that $CeAl_{2}$ undergoes an antiferromagnetic phase transition near 4 K whereas $GdAl_{2}$ a ferromagnetic transition at 170 K. The distinctive magnetic behaviors of $RAI_{2}$ originate from the different 4f band filling.

• Journal of the Korean Chemical Society
• /
• v.46 no.4
• /
• pp.323-330
• /
• 2002

The protonation equilibrium of 5-substituted 2-furaldehydes is investigated spectrophotometrically in aqueous sulfuric acid at $25^{\circ}C$ and the basicity constants(p$K_{BH+}$) of the substrates is calculated by means of the excess acidity method. The basicity constant of 5-metyl-2-furaldehyde having electron donating group is larger than that of 5- nitro-2-furaldehyde having electron withdrawing group. Difference between the basicity constants(p$K_{BH+}$) of these two compounds was about 3.25 pK unit. The m value which is the degree of solvation of the protonated substrate is similar to that of acetophenone having same protonation site. The dependence of p$K_{BH+}$ on m value shows good linear cor-relation.

• Journal of the Korean Magnetics Society
• /
• v.8 no.5
• /
• pp.317-332
• /
• 1998

The adiabatic nuclear demagnetization cooling technique has reduced the lowest accessible temperature to the regime of microkelvin, and consequently led to a large expansion in microkelvin physics such as solid and liquid $^{3}He$, superconductivity of noble metals, spin glass transition, and nuclear magnetism. Our ability to reach temperature in microkelvin regime has greatly facilitated by the developments of dilution refrigerator and superconductivity magnet. It is appropriate to divide nuclear demagnetization cooling into two categories; those in which only the nuclear spin system is cooled down and those in which the lattice and conduction electrons in the refrigerant or the specimen are also cooled by the cooling power of nuclear spin system. The former cooling technique has utilized to investigate the nuclear magnetism at temperature in nanokelvin regime. The latter is widely used in studying the phenomena occurring in microkelvin regime. In this review paper, we will discuss the basic principles of nuclear demagnetization cooling and its applications. This work is supported by the Basic Science Research Institute Program under contract number BSRI-97-2404.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.343-354
• /
• 2009

In this paper, a magnetic-less dc-dc switching converter realizing an integrable power conversion system is described. Instead of magnetic devices, the inductive impedance range of piezoelectric transducers is utilized to store and resonate the energy for soft-switching. Piezoelectric devices have no windings and deliver the power by the electrodes, which lead to mass product through semiconductor-manufacturing process. This paper presents a resonant-type step-up dc-dc power converter employing a disk-type piezoelectric transducer, analyzing the operation principles and the frequency control characteristics. Also, a topology extension of the single stage converter into cascaded multi-stage is presented and analyzed with the operation principles and control characteristics. For verification of the analysis, a 10W output dc-dc power converter hardware was implemented. The hardware experiments shows a good frequency control and power efficiency greater than 96% in the single stage. A hardware prototype of the extended multi-stage one was also realized and tested. The results shows that the converter has the same frequency control performance and high efficiency such as 93%.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.51-54
• /
• 2007

By substituting Cr in inverse-spinel $Fe_3O_4,\;Cr_xFe_{3-x}O_4$ thin film samples were prepared by sol-gel spin-coating method and their structural electronic, and magnetic properties were analyzed. X-ray diffraction indicates that the lattice constant decrease with increasing Cr composition (x). This result can be explained in terms of occupation of octahedral sites by $Cr^{3+}$ ions with smaller ionic radius than that of $Fe^{3+}$ Vibrating sample magnetometry measurements on the samples at room temperature revealed that saturation magnetization ($M_s$) decrease by Cr substitution, explainable by comparing spin magnetic moment among the related transition-metal ions. A decrease of magnetoresistence effect with x was observed, similar to that of $M_s$. The coercivity of the $Cr_xFe_{3-x}O_4$ films was found to increase with x, attributed to the increase of magnetic anisotropy by the existence of octahedral $Cr^{3+}(d^3)$.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.16-23
• /
• 1992

High $T_c$, superconductor $(Y_{1-x}Eu_x)Ba_2Cu_3O_{7-{\delta}}$ (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) were prepared and the physical properties were observed. XRD analysis showed that the structures of all the specimen were orthorhombic and the lattice parameters a, b and c increased with the increasing x value. Electrical resistivity and magnetization measurements revealed that pure high $T_c$, superconducting phases were formed at above 90 K. The critical temperatures increased with increasing the amount of Eu. From the measurement of magnetization and the size of the grains using SEM micrographs, volume diamagnetic susceptibilities for each specimen were calculated. These values decreased with the increasing x value. The composition of Ba in the lattice site decreased as the concentration of Eu increased, and this was confirmed by EPMA. It was found out that the volume diamagnetic susceptibility of each specimen was directly influenced by the composition of Ba in the lattice site.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.350-356
• /
• 1998

$Y_{3-x}La_xFe_5O_{12}$ (x=0.0, 0.25, 0.5, 0.75, 1.0) powders and thin films were fabricated by a sol-gel method and their magnetic properties and crystal structure were investigated by using X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), and Mossbauer spectroscopy. XRD and Mossbauer spectroscopy measurements show that garnet powders annealed at 900 $^{\circ}C$ for 8 hours were single-phased and that thin films fired at 800 $^{\circ}C$ for 2 hours were crystallized without any preferred direction. X-ray diffraction patterns of $Y_{3-x}La_xFe_5O_{12}$ powders annealed at 1000 $^{\circ}C$ had only peaks of the garnet structure in case of x$\leq$0.75 but those of $Y_2LaFe_5O_{12}$ powders consisted of peaks from garnets and $LaFeO_3$. Mossbauer sepectra of garnet powders grown by the sol-gel method had a similar shape of those of powders grown by a conventional ceramic method. Grain sizes of garnet powders were 200~300 nm and the averaged surface roughness was 3.17 nm. Results of VSM measurements show the powders and thin films had soft magnetic properties and that the garnet powders had the largest saturation magnetization, 30 emu/g, and the lowest coercivity, 52 Oe.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.346-346
• /
• 2011

최근 들어 나노스케일에서의 자구체(magnetic domain)에 대한 연구가 매우 활발하게 진행되고 있다. 현재 국내에서 자성 나노구조에 대한 연구가 매우 활발하게 진행 되고 있는 반면에 나노자성이미지를 연구 할 수 있는 장비는 매우 미비한 상황이다. 이러한 자성 이미징을 연구하는데 있어 가장 핵심 적인 장비가 SEMPA(Scanning Electron Microscopy with Polarization Analysis)이다. 국내에서 자성나노구조의 자화와 형상을 동시에 측정 할 수 있는 장비는 한국표준과학연구원에서 개발된 W-filament source를 사용한 SEMPA가 유일하다. 일반적으로 SEM의 경우 고에너지 빔의 전자 빔을 주사 시키고 이때 발생되는 이차 전자의 수를 2차원상의 영역에 따라 달라지는 비로 형상을 측정 하게 된다. 이때 전자의 수 뿐만 아니라 이들의 spin polarization을 측정 할 수 있다면 형상뿐 만 아니라 표면에서의 스핀 상태를 동시에 측정할 수 있게 된다. 기개발된 W-filament source를 이용한 SEMPA는 field emission source에 비하여 전자빔의 세기가 약하며 이차 전자의 수도 적어 spin polarization 감도가 현저히 떨어진다. 또한 초고진공(1x10-10torr)에서 사용할 수 없어 측정시료의 contamination을 방지 할 수 없다. 이러한 문제점들을 보안하기 위하여 field emission source를 이용한 FE-SEMPA를 개발 중이다. 본 연구에서는 설계 및 전산시늉등의 연구결과와 진행사항을 발표하고자 한다. 아울러 W-filament를 사용한 SEMPA의 연구결과에 대한 논의를 할 예정이다.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.28-35
• /
• 1996

Dispersion behavior was investigated as functions of species and arrount of addtives, binders, abrasives, lubricants, etc.. Dispersibilityand other various properties were affected by the fuctional groups of binders. Friction coefficient and surface roughness of tape were changed with lubricants, therefore duratility of magnetic tape was varied. As a result of above investigations, we concluded that dispersion behavior of particles was very sensitive for obtaining maximum properties of metal particle tape.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.302-305
• /
• 2000

It is important to control the electron energy distribution to have high quality plasma process. A conventional inductively coupled plasma(ICP) source with 13.56MHz power is not adequate for low damage sub-half micron patterning process due to higher electron temperature. Only the pulsed plasma technique seems to provide low electron temperature, and thus low process damage. Recently, a novel method proposed by us, named as ‘Enhanced-ICP’, which uses periodic weak axial magnetic field added to a normal ICP source, has shown great improvement in etch characteristics. changes of plasma characteristics according to the frequency of time-varying axial magnetic field have been observed by probe-time-averaged Langmuir probe.