• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.613-620
• /
• 2016

In order to scrutinize the fluid conductivity effects on the electromagnetic flowmeter(EMF) characteristics, a small scale EMF was designed and fabricated. The measuring tube has a $3mm{\times}4mm$ rectangular cross-section, 9 mm length, and a $2mm{\times}3mm$ plate electrode and a ${\Phi}1.5mm$ point electrode. The design parameters, such as the magnetizing frequency and the number of coil turns, and the diameter were optimized. The EMF was tested with a gravimetric calibrator and showed good linearity in the range of 0 to $1.17{\times}10^{-5}m^3/s$. The fluid conductivity was varied between 3 and $11{\mu}S/cm$, and the magnitude of the flow signal was proportional to the fluid conductivity and the wetted area of the electrode. The design information and the test results provide flow measurement techniques for very low flowrate.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.45-50
• /
• 2015

The goal of this research is the create novel magnets with no rare-earth contents, with larger energy product by comparison with currently used ferrites. For this purpose we developed nano-sized hard-type/soft-type composite ferrite in which high remanent magnetization (Mr) and high coercivity (Hc). Nano-sized Ba-ferrite, Ni-Zn ferrite and $BaFe_{12}O_{19}/Ni_{0.5}Zn_{0.5}Fe_2O_4$ composite ferrites were prepared by sol-gel combustion method by use of glicine-nitrate and citric acid. Nanocomposite ferrites were calcined at temperature range $700-900^{\circ}C$ for 1h. According to the X-ray diffraction patterns and FT-IR spectra, single phase of NiZn-ferrite and Ba-ferrite were detected and hard/soft nanocomposite ferrite was indicated to the coexistence of the magnetoplumbite-structural $BaFe_{12}O_{19}$ and spinel-structural $Ni_{0.5}Zn_{0.5}Fe_2O_4$ that agreed with the standard JCPDS 10-0325 data. The particle size of nanocomposite turn out to be less than 120 nm. The nanocomposite ferrite shows a single-phase magnetization behavior, implying that the hard magnetic phase and soft magnetic phase were well exchange-coupled. The specific saturation magnetization ($M_s$) of the nanocomposite ferrite is located between hard ($BaFe_{12}O_{19}$) and soft ferrite($Ni_{0.5}Zn_{0.5}Fe_2O_4$). The remanence (Mr) of nanocomposite ferrite is much higher than that of the individual $BaFe_{12}O_{19}$ and $Ni_{0.5}Zn_{0.5}Fe_2O_4$ ferrite, and $(BH)_{max}$ is increased slightly.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.205-208
• /
• 2001

본 연구에서는 소결온도와 치환원소에 따른 서클레이터/아이솔레이터용 YIG 페라이트의 미세구조와 전자기적 특성을 고찰하고자 하였다. Ca, V, In을 치환시킨 YIG 페라이트를 분무건조기를 사용하여 준구형 과립상태로 만들고, 일반적인 세라믹 제조 공정에 따라 12$50^{\circ}C$, 1275$^{\circ}C$, 130$0^{\circ}C$, 13$25^{\circ}C$에서 각각 소결하였다. 제조된 YIG 페라이트에 대한 기본 물성과 자기 특성을 밀도측정기, XRD, SEM, VSM, FMR(Ferromagnetic Resonance) 등을 이용하여 측정 분석하였다. $Y_{1.6}$C $a_{1.4}$F $e_4$ $V_{0.7}$I $n_{0.3}$ $O_{12}$ 조성의 YIG 페라이트에 대한 전자기적 특성 측정 결과 130$0^{\circ}C$에서 소결한 YIG 페라이트가 높은 포화자화(4$\pi$Ms) 값과 낮은 자기공명반치폭($\Delta$H)을 지닌 우수한 전자기적 특성을 나타내었다. 전자기적 특성을 나타내었다.나타내었다.다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.230-231
• /
• 2013

본 논문은 형광등 안정기를 LED 조명으로 호환하기 위한 전자식 안정기 호환형 LED 구동회로를 제안한다. 제안 방식은 기존의 전자식 안정기인 LCC 공진형 인버터에 트랜스포머와 정류단의 추가해 LLCC의 공진형 컨터버로 동작시키고 해석을 한다. 회로의 특성을 분석하면 트랜스포머의 턴비와 자화 인덕턴스의 설계로 최대 전력점의 가변 및 최대전력, 링크전압의 최적 설계가 가능하다. 이론적 해석의 검증을 위하여 27W급 시작품을 제작하고 전자식 안정기와 동작하여 안정기와의 호환성 검증 및 설계와 동일한 특성을 가지고 있음을 증명하였다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.148-151
• /
• 2002

본 연구에서는 Ca, In, V, Al을 첨가 원소로 사용한 YIG 페라이트 분말을 분무건조기로 준구형 과립으로 만들어 일반적인 세라믹 제조 공정 방법으로 다결정 테를 제조하였고, 소결온도와 첨가원소의 조성비에 따른 YIG 페라이트의 기본물성과 전자기적 특성 변화를 조사하였다. 제조된 YIG 페라이트에 대한 기본 물성과 자기 특성을 밀도측정기, XRD, SEM, VSM, Network Analyzer 등을 이용하여 측정 분석하였다. $Y_{2.1}$C $a_{0.9}$F $e_{4.4}$ $V_{0.5}$I $n_{0.05}$A $l_{0.05}$ $O_{12}$ 조성의 YIG 페라이트에 대한 전자기적 특성 측정 결과 13$50^{\circ}C$에서 소결한 YIG 페라이트에서 우수한 삽입손실 값과 Isolation 값을 나타내였으며 이론밀도의 92%의 높은 밀도값을 가지며 높은 포화자화(4$\pi$Ms) 값을 지닌 우수한 전자기적 특성을 나타내었다.내었다.내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.396-396
• /
• 2010

최근에 자구벽 이동을 이용한 race track memory, 혹은 나노자성체의 자구 동역학 등에 대한 관심이 집중되고 있다. 용량은 하드디스크의 크기를 가지며 속도는 SRAM, 집적도는 DRAM에 필적하는 새로운 메모리의 실현은 지금까지 이용되는 대부분의 메모리를 대체할 가능성이 있다. 이러한 메모리의 개발에 가장 기본이 되는 측정기술은 나노크기의 자성 구조체에서 자구 혹은 자구벽 이동을 측정하는 기술로써 현재 국내에서 자성 나노구조의 자화방향과 더불어 topography를 동시에 측정할 수 있는 장치는 본 SEMPA가 유일하다. SEMPA는 기존에 사용되어지던 SEM(전자 현미경) 에서 알 수 있는 나노 구조의 형상이외에 전자의 스핀방향을 검출함으로써 형상과 스핀의 결함된 imaging 을 할 수 있다. 일반적으로 기존의 SEM의 경우 고 에너지빔의 전자빔을 주사시키고 이때 발생되는 이차 전자의 수를 2차원상의 영역에 따라 달라지는 비로 mapping 을 하게 된다. 이때 전자의 수뿐만 아니라 이들의 스핀편향(spin polarization) 을 측정할 수 있다면 형상뿐만 아니라 표면에서의 스핀상태를 동시에 측정 할 수 있게 된다. 본 발표에서는 이 방법을 이용하여 나노구조체의 자구측정 결과를 제시하고자 한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.65-69
• /
• 2003

Microstructural and electromagnetic properties of YIG ferrites, (Y, Ca)-(Fe, V, In, Al)-O for Isolator/Circulator were investigated with the sintering temperature. YIG ferrites of $Y_{2.1}Ca_{0.9}Fe_{4.4}V_{0.5}In_{0.05}Al_{0.05}O_{12}$ were fabricated by sintering at $1300^{\circ}C$, $1330^{\circ}C$, $1350^{\circ}C$, $1370^{\circ}C$. Crystallographic and microstructural properties were measured using XRD and SEM. Saturation magnetization$(4{\pi}M_s)$ were measured using VSM, and FMR(Ferromagnetic Resonance) experiment was conducted to measure ferromagnetic resonance line width$({\Delta}H)$. Microwave characteristics of YIG ferrites were measured using a Network Analyzer. The YIG ferrite of $Y_{2.1}Ca_{0.9}Fe_{4.4}V_{0.5}In_{0.05}Al_{0.05}O_{12}$, sintered at $1350^{\circ}C$, showed higher density, saturation magnetization and lower ferromagnetic resonance line width than those sintered at any other temperature.

• Journal of the Korean Magnetics Society
• /
• v.13 no.2
• /
• pp.59-63
• /
• 2003

Superparamagnetic properties of self-aggregated cobalt nanoparticles in the perfluorinated ion-exchange polymeric membrane (MF-4SK) prepared by ion-exchange and recovery methods were investigated by transmission electron microscopy (TEM) and superconducting quantum interference device (SQUID) magnetometer at various temperatures. Our experimental results show that cobalt nanoparticles in MF-4SK for the concentration of $7.8{\times}10^{19}$ atoms per 1 g of polymer membrane exhibit superparamagnetic properties above the average blocking temperature ($T_{B}$), which is determined to be around 185 K at applied field of 500 Oe. The average particle radius of 4.0 nm achieved from Langevin function fit is in good agreement with TEM observations. This experimental evidence suggests that cobalt nanoparticles in polymer film obey a single domain theory. The results are discussed in the light of current theory for the superparamagnetic behavior of magnetic nanoparticles.

• Journal of the Korean Chemical Society
• /
• v.45 no.1
• /
• pp.61-66
• /
• 2001

Stabilized Cross-linking Enzyme Crystals(CLEC) can be used as not only biocatalysts but also as enzyme sensors. PMS(Phenylmethyl Sulfate)was shown more efficience than any other electron mediator transfers toward HLADH(Horse Liver Alcohol Dehydrogenase)that were examined. NQS(naphtoquinonesulphonate), phenothiazine and ferrocene aldehyde had respectively just 52%, 37%, 35% electron transfer efficiency as compared to PMS . HLADH-CLEC was very stable toward elctron transfer mediators such as PMS, NQS and ferrocene aldehyde in which HLADH-solution was unstable.

• Economic and Environmental Geology
• /
• v.37 no.2
• /
• pp.195-206
• /
• 2004

Paleomagnetic and rock-magnetic investigations have been carried out for the Cretaceous sedimentary rocks in the Poongam (also called Gapcheon) Basin in the eastern South Korea. A total of 128 independently oriented core samples were drilled from 13 sites for this study. The mean direction after bedding correction (D/I=353.1$^{\circ}$/55.6$^{\circ}$, k=21.5, =$$\alpha$_{95}$=10.1$^{\circ}$) is more dispersed than the mean direction before bedding correction (D/I=10.5$^{\circ}$/56.9$^{\circ}$, k=73.9, =$$\alpha$_{95}$=5.3$^{\circ}$), and the stepwise unfolding of the characteristic remanent magnetization (ChRM) reveals a maximum value of k at 20% unfolding. Secondary authigenic hematite accompanied by altered clays such as chlorite was identified by the electron microscope observations. These results collectively imply that the ChRM is remagnetized due to the formation of the secondary authigenic hematite after tilting of the strata. It is interpreted that the chemical remagnetization was connected to the introduction of mixed magmatic-meteoric fluids, which formed hydrothermal vein deposits near the study area. The paleomagnetic pole position (214.3$^{\circ}$E, 81.6$^{\circ}$N, =$A_{95}$=7.4$^{\circ}$) of the Cretaceous sedimentary rocks calculated from remagnetized directions is close to those of the Late Cretaceous and Tertiary poles of the Korean Peninsula. This Late Cretaceous to Tertiary remagnetization seems to be widespread over the Okcheon Belt because the chemical remagnetization is previously reported to be found in rocks from other Cretaceous small basins (e.g., Eumseong, Gongju and Youngdong basins) along the Okcheon Belt and some Paleozoic strata from the Okcheon unmetamorphosed zone.