• Progress in Superconductivity and Cryogenics
• /
• v.11 no.3
• /
• pp.15-19
• /
• 2009

Recently, it is proposed to make striations on the YBCO coated conductor and to transpose each other as one of the solutions to decrease the perpendicular magnetization loss. For large power application using HTS, the stacked conductor packing the YBCO coated conductors should be used because single conductor is limited in flowing of demanded large current. In this paper, we research the affect of the striation and continuously transposed stacking geometry on the magnetization loss in perpendicularly exposed magnetic field. Several short samples having different number of striation and continuously transposed stack are prepared and tested in perpendicularly exposed magnetic field for the magnetization loss characteristics. The magnetization loss of striated sample was lower than sample without striation. The reduction effect on magnetization loss by the striation is obviously appeared in higher field and lower number of stack and decreased as increasing the transposed stacking number. Also, the reduction effect by transposed stack is obviously appeared in lower field at lower number of striation and isn't appeared at higher striation number and higher magnetic field.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.22-26
• /
• 1998

The purpose of this experimenL is to investigate the magnetic anisotropy and microwave absorbing properties in M-type Bat territe (${BaFe}_{12-2X}{A}_{X}{Me}_{X}{O}_{19}$), where $Fe_{3+}$ is substituted by $Ti_{4+}$ in A site and $Co_{2+}$ in Me site. The saturation magnetization (Ms) is linearly decreased with the substitution rate(x) and the coerciviLy (He) is rapidly decreased in accordance with the reduction in t the magnetocrystalline anisotropy For the specimen with x=0.8 and thickness of 2 mm, the reflection loss calculated from the n material constants is less than -10 dB (90% absorption) in the frequency range of 10~16 GHz. The absorption loss is pre이.ctcd t to be more than 20 dElern in the frequency range of 12-16 GHz. The results demonstrate that the Ti-Co substituted M-type Ba-ferrite can be effectively used as a microwave absorber at high frequency range.

• Journal of the Korean Magnetics Society
• /
• v.20 no.6
• /
• pp.228-233
• /
• 2010

The microwave permeability was measured in order to analyze the thickness dependence of loss properties in CoFeHfO thin films with varying thickness of t = 57~1368 nm. A single resonance peak (P1) at 2.95 GHz was appeared in the samples with thickness less than 405 nm, while second resonance peak (P2) at 547MHz was additionally appeared in the samples with thickness greater than 405 nm. The P2 was originated by the angle distribution of the easy axis, which was confirmed from the measured results of the change of imaginary permeability with applied magnetic field in the sample of 1368 nm thickness and low field torque curves. If the second peaks can be reduced by minimizing the angle distribution of the easy axis, the CoFeHfO thin films with thickness greater than 400 nm can be used for the compact microwave devices operated at up to 2 GHz ranges.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.602-607
• /
• 2002

In this paper, we proposed an approach to efficiently compress and transmit multiresoltion 3D lariat models for multimedia and very low bit rate applications. A personal facial model is obtained by a 3D laser digitizer, and further re-quantized at several resolutions according to different scope of applications, such as animation, video game, and video conference. By deforming 2D templates to match and re-quantize a 3D digitized facial model, we obtain its compressed model. In the present study, we create hierarchical 2D lariat wireframe templates are adapted according to facial feature points and the proposed piecewise chainlet affined transformation(PACT) method. The 3D digitized model after requantization are reduced significantly without perceptual loss. Moreover the proposed multiresoulation lariat models possessed of hierarchial data structure are apt to be progressively transmitted and displayed across internet.

• Journal of the Korean Magnetics Society
• /
• v.9 no.6
• /
• pp.285-290
• /
• 1999

The magnetic properties of sputtered amorphous $Fe_{86.7}Zr_{3.3}B_4Ag_6$ thin films, which contains an additional insoluble element Ag, have been investigated as a function of uniaxal field annealing temperature. The amorphous $Fe_{86.7}Zr_{3.3}B_4Ag_6$ thin films produced by relatively low temperature annealing at 40$0^{\circ}C$ for 1 hour was found to have very high permeability of 7800 at 50 MHz, 0.2 mOe, high magnetization of 1.7 T, low coercivity of 1.0 Oe and very low core loss of 1.4 W/cc at 1 MHz, 0.1 T, respectively. It is notable that the permeability and core loss values for various kinds of the soft magnetic thin films reported up to now. The reason for the appearance for the good soft magnetic properties is presumably due to the homogeneous formation of very fine bcc $\alpha$-Fe clusters with the size in the amorphous $Fe_{86.7}Zr_{3.3}B_4Ag_6$ thin films matrix, which can be deduced from the XRD results.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.92-92
• /
• 2011

최근 건설기술의 발전과 함께 강재 케이블을 이용하는 시설물의 시공이 점점 증가하는 추세이다. 특히 현수교, 사장교와 같은 초장대 교량에 사용되는 케이블은 주거더 및 상판에 의한 하중의 대부분을 지지하는 핵심부재이다. 하지만 이러한 케이블 부재는 부식, 파단 등으로 인한 단면손실이 발생할 수 있고, 이로 인한 손상부의 응력집중으로 인해 시설물 전체의 붕괴로 이어질 수 있는 위험성을 가진다. 따라서 조기에 단면손실을 찾아 사고를 미연에 방지할 수 있는 강재 케이블 비파괴 검사 기술기반의 건전성 모니터링이 필수적이다. 이러한 효율적인 건전성 모니터링을 위해 스마트 센서를 활용한 연구가 활발히 이루어지고 있는데, 그중 대표적인 스마트 센서중 하나인 마그네틱 센서는 높은 신뢰도와 어디에나 적용 가능한 재현성 때문에 구조물 건전성 평가에 적용하기 유용한 기술로 그 적용범위가 선박, 항공등으로 점점 넓어지고 있는 추세이다. 마그네틱 센서는 그 적용대상에 따라 다양한 마그네틱 특성을 활용할 수 있는데, 최근에는 투자율 계측을 통해 케이블의 장력 측정이 가능한 Elasto-Magnetic 센서(E/M 센서)가 개발되었고 그 활용성에 대한 연구가 이뤄지고 있다. 이에 본 연구에서는 E/M 센서를 이용한 강재 케이블 모니터링 기술을 제안하고자 한다. E/M 센서는 본래 케이블의 장력측정을 위해 개발되었지만 본 연구에서는 강재 케이블 부재의 단면손실 검색을 위해 적용하였다. 제안된 기술의 실험적 검증을 위해 E/M 센서를 이용하여 4가지의 다른 직경을 가지는 강봉시편을 E/M 센서헤드의 1차 코일을 통해 자화시키고, 각각의 직경에서 출력전압을 2차 코일을 이용하여 계측하였다. 그 결과 강봉의 직경이 감소함에 따라 출력 전압이 감소함을 보였다. 반복실험을 통해 해상도 및 선형성이 확보되는 최적의 입력전압과 출력전압의 워킹포인트를 선정하였고, 선정된 조건에서 강봉시편을 일정 간격으로 스캔한 결과 단면감소에 따른 선형적인 출력전압 감소와 동시에 단면 변화 지점에서는 추세선에서 크게 벗어난 출력전압 계측값을 나타내었다. 본 실험을 통해 제안된 E/M 센서를 이용한 강재 케이블 모니터링 기술의 유용성 및 적용가능성을 확인할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.165-175
• /
• 2001

In this paper, it is analyzed lumped element isolators analytically by the analysis program using scattering matrixes including ferrite saturation magnetization, external direct current magnetic field and strip line length and width, designed and experimented the small isolator of mobile phone. The simulation results show that the characteristics of the isolator are affected by external R, C, length and width of strip line and ferrite width and saturation magnetization sensitivity. We proposed the isolator specification applied cellular and PCS mobile phones, experimented the isolator for cellular mobile phones. From the experimented result, isolation and return loss are measured below 20 dB, insertion loss is below 0.7 dB, bandwidth is about 44 MHz at center frequency 836.5 KHz. The implemented isolator has better performances than the conventional one.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.96-98
• /
• 2018

본 논문에서는 800V 배터리 전기자동차 LDC용 낮은 스위치 전압정격을 갖는 새로운 소프트 스위칭 하프브리지 컨버터를 제안한다. 제안하는 컨버터는 입력이 직렬구조로써 입력전압의 절반으로 낮은 스위치의 전압정격을 갖기 때문에 600V의 Si-MOSFET를 사용할 수 있어 도통손실을 줄일 수 있으며 부분공진 동작으로 스위칭 손실 저감 효과를 갖고, 넓은 입력전압 및 부하영역에서 소프트 스위칭을 성취하여 높은 효율을 달성할 수 있으며 변압기의 직렬연결로 된 커패시터로 인해 자화 전류의 오프셋이 없다. 제안하는 소프트 스위칭 컨버터의 동작원리를 제시하고 시작품을 통해 본 논문의 타당성을 검증하였다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.12a
• /
• pp.3-11
• /
• 2004

The power loss analysis was carried out for Ni-Cu-Zn ferrite samples with different content of NiO and ZnO. The power loss, Pcv decreases monotonically wi increasing temperature and attains to a certain value at around $100\~120$ degrees Celsius. The frequency dependence of Pcv can be explained by $Pcv\~f^n$', and n is independent of the frequency, f up to 1MHz. The Pcv decreases with an increase in ZnO/NiO. The Pcv was separated to hysteresis loss, Ph and residual loss, (Pcv-Ph). The temperature characteristics and compositional dependence of Pcv can be attributed to the Ph, while (Pcv-Ph) is not affected by both temperature and ZnO/NiO. By analyzing temperature and composition dependence of Ph and initial permeability, ${\mu}^i$ following equations could be formularized. $${\mu}_i{\mu}o=I_x\;^2/(K_1+bs_ol_s)\;\;\;\;(1)$$ $Wh=13.5(I_s\;^2/{\mu}_i{\mu}_o)\;\;\;\;(2)$$ Were ${\mu}_o$ is permeability of vacuum, $I_s$ saturation magnetization, $K_1$ anisotropy constant, $S_o$ internal heterogeneous stress, $I_s$, magnetostriction constant, b unknown constant. Wh hysteresis loss per one cycle of excitation (Ph: Wh*f). Steinmetz constant of Ni-Cu-Zn ferrites, $m=1.64\~2.2$ is smaller than the one of Mn-Zn ferrites, which suggests the difference of loss mechanism between these materials.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.137-138
• /
• 2013

능동 클램프 포워드 컨버터의 2차단에 전류 증배 정류회로를 사용할 경우 2차단에서의 도통 손실을 줄일 수 있다. 뿐만 아니라 상대적으로 큰 자화 인덕턴스와 작은 누설 인덕턴스를 이용하여 영전압 스위칭을 달성할 수 있으므로 회로 전체 동작 측면에서 바람직하다. 본 논문에서는 제안된 회로의 동작 설명과 함께 영전압 스위칭을 위한 조건을 다루었고 240W급 (12-V/20-A) 프로토타입 회로를 통해 분석 결과의 타당성을 검증하였다.