• Title/Summary/Keyword: 자화손실

Search Result 94, Processing Time 0.035 seconds

미소자성 기법에 의한 SA508-3 강의 기계적 성질 변화 평가

  • Park, Deok-Geun;Song, Hun;Hong, Jun-Hwa;Kim, In-Seop
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.05b
    • /
    • pp.675-680
    • /
    • 1995
  • 원자로 압력용기 재료인 SA508-3 강의 인장소성변형에 따른 자기적 성질변화를 연구하였다. 소성변형에 따른 보자력, 잔류자화, 자기이력손실 및 Barkhausen Noise의 변화를 측정하였으며, 변형에 따른 자기적성질의 변화를 자구와 전위와의 상호작용으로 설명하였다. 강자성체의 자기적 성질과 기계적 성질 사이는 밀접한 관련이 있으며, 이를 이용하면 압력용기강의 조사효과 평가에 적용 할 수 있을 것으로 보인다.

  • PDF

A Soft-switched Converter with Low-Voltage Rating of Switch for the 800V/14V LDC of EV (전기자동차 800V/14V LDC용 낮은 스위치 전압정격을 갖는 소프트 스위칭 컨버터)

  • Kim, Kangsan;Kim, Byungwoo;Choi, Sewan
    • Proceedings of the KIPE Conference
    • /
    • 2017.11a
    • /
    • pp.11-12
    • /
    • 2017
  • 본 논문에서는 전기자동차 800V/14V LDC용 낮은 전압정격을 갖는 소프트 스위칭 컨버터를 제안한다. 제안하는 컨버터는 입력이 직렬구조로써 입력전압의 절반으로 낮은 스위치의 전압정격을 갖기 때문에 도통손실과 스위칭 손실 저감 효과를 갖고, 넓은 입력전압 및 부하영역에서 소프트 스위칭을 성취하여 높은 효율을 달성할 수 있으며 변압기의 직렬연결로 된 커패시터로 인해 자화전류의 오프셋이 없다. 제안하는 소프트 스위칭 컨버터의 동작원리를 제시하고 시작품을 통해 본 논문의 타당성을 검증하였다.

  • PDF

Balanced Forward-Flyback Converter for high efficiency LED drive (고효율 LED 구동을 위한 Balanced Forward-Flyback 컨버터)

  • Hwang, Min-Ha;Choi, Yoon;Jung, Young-Jin;Oh, Dong-Sung;Han, Sang-Kyoo
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.246-247
    • /
    • 2012
  • 역률개선용 AC/DC Flyback 컨버터의 경우 우수한 역률을 획득할 수 있으나 코어손실이 크고 효율이 낮으며 반면 Forward 컨버터의 경우 코어손실이 작아 높은 효율을 획득할 수 있으나 Dead zone이 존재하여 고역률 획득이 어려운 단점을 갖는다. 따라서 본 논문에서는 Forward 컨버터와 Flyback 컨버터의 장점을 동시에 구현할 수 있는 고효율 및 고역률 Balanced forward-flyback 컨버터를 제안한다. 제안된 컨버터는 스위치 온 시 Forward 컨버터로 동작하며 스위치 오프 시 트랜스포머 자화인덕터 리셋을 위해 Flyback 컨버터로 동작하므로 고역률 및 고효율 획득이 가능하며 Forward 및 Flyback 컨버터가 다루는 에너지량이 전류평형 캐패시터에 의해 항상 절반씩 배분되므로 AC입력전압의 크기에 관계없이 항상 고효율 획득이 가능하다. 제안된 회로의 타당성 검증을 위해 이론적 분석결과와 24W급 LED 조명 회로에 적용한 실험결과를 제시한다.

  • PDF

A Study for Solid State Autotransformer (전자식 양방향 변압기의 구성 및 동작에 관한 연구)

  • Park, Jong-Sang;Yoo, Soo-Yeub
    • Proceedings of the KIEE Conference
    • /
    • 2005.07b
    • /
    • pp.1543-1544
    • /
    • 2005
  • 고효율과 경량의 전자식 단권변압기를 적력전자 기술을 적용하여 구성하여 보았다. 이 system은 양 방향으로 전력, 전류변환이 가능한 4사분면의 어느 동작도 가능하도록 하기위하여 양방향으로 도통이 가능한 스위치를 이용하여 구성하였다. 이 전체적 구성은 Buck Converter와 Boost Converter를 동시에 응용한 회로로 구성 하였다. 이 컨버터는 전류의 진상과 지상이 심한 유도성 부하와 용량성의 부하에도 잘 적응할 수 있고, 더 나아가 에너지 반환하는 교류시스템에도 적용할 수 있다. 본 연구에서 제시하는 시스템은 자기회로를 자화시키는 여자전류와 전류가 흐르는 도체가 가지는 동손을 감소킬 수 있다. 이에 반하여 반도체 스위치가 가지는 스위칭 손실과 반도체 회로를 구동하는데 필요한 구동회오의 유지에 필요한 전력이 필요하다. 이러한 여러 요인의 증가하여도 전체 손실은 자장결합 변압기보다 작은 것 을 보여주고 있다.

  • PDF

Fabrication of 13Cr-1.5Nb-Fe Alloy Powder and AC Magnetic Properties of the Sintered Magnetic Core (소결 13Cr-1.5Nb-Fe 합금의 교류 자기 특성)

  • 오환수;김택기;조용수
    • Journal of the Korean Magnetics Society
    • /
    • v.10 no.1
    • /
    • pp.11-15
    • /
    • 2000
  • 13Cr-1.5Nb-Fe alloy powder prepared by water atomizing method is reduced with flowing hydrogen gas. The characteristics of a reduced alloy powder is investigated and magnetic cores formed by using the reduction power sintered in the vacuum of ∼10$\^$-5/ Torr. In order to study on the magnetic cores permeability and power loss in alternating magnetic field are also measured. The result of particle size distribution shows the paticle size is 70 ㎛ at volume fraction of 50 %. The saturation magnetization of the reduced alloy powder is 160 emu/g. The relative peak permeability (H$\_$a/=5Oe) of a magnetic core is 400 and the power loss (B$\_$m/=80G) 0.12 mW/cc at sintering temperature of 1,200 $\^{C}$, 10 ton/㎠ forming pressure, and 1 kHz.

  • PDF

Electrical Characteristics of Striated YBCO Coated Conductors (분할형 YBCO CC의 전기적 특성)

  • Byun, Sang-Beom;Yang, Kwy-Sang;Park, Sang-Ho;Choi, Suk-Jin;Kim, Byeong-Joo;Kim, Woo-Seok;Lee, Ji-Kwang;Park, Chan;Choi, Kyeong-Dal
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.806-807
    • /
    • 2008
  • 2세대 고온초전도 선재는 전기적, 기계적 특성이 1세대 고온초전도 선재보다 더 우수하지만, 1세대 고온초전도 선재보다 더 높은 교류손실 밀도를 발생시킨다는 단점이 있다. 본 논문에서는 2세대 초전도 선재인 박막형 YBCO CC(Coated Conductor)에서 발생하는 교류 손실을 감소하기 위한 방법으로 선재의 초전도층을 분할하여 단면의 종횡비를 줄이는 방법을 제안하였으며, 실제로 제작 및 특성 측정을 통해 제안된 방법의 타당성을 보였다. 박막형 선재의 초전도층을 분할하기 위해 포토마스킹을 이용한 에칭 방법을 이용하였다. 샘플의 제작을 위해 안정화층이 없는 폭 12mm 의 YBCO CC를 사용하여 샘플의 길이는 15cm로 하고 선재의 분할수를 다르게 하여 각 샘플에 대한 자화 손실과 각 소선의 임계전류를 측정한 후 선재의 전기적 특성 변화를 알아보았다.

  • PDF

Numerical Analysis and Measurement of Magnetization Loss in BSCCO Multi-stacked Conductor According to Stacking Geometry (적층 배열형상에 따른 BSCCO 적층선재의 자화손실 특성 수치해석 및 측정)

  • Park, Myung-Jin;Lim, Hyoung-Woo;Lee, Kwang-Youn;Cha, Guee-Soo;Lee, Ji-Kwang
    • The Transactions of the Korean Institute of Electrical Engineers B
    • /
    • v.55 no.2
    • /
    • pp.83-88
    • /
    • 2006
  • AC loss is one of the main research area in AC power application using high temperature superconductor(HTS), such as HTS transformer, HTS current limiter and HTS cable, because it is closely related to efficiency, economic estimation and design of power device. A lot of research for various arrangements of HTS tapes have been performed to increase a capacity of transport current because single HTS tape can not satisfy the demanded current capacity in HTS power application. In this paper, we studied magnetization loss by different several arrangements of BSCCO tapes such as Edge-to-Edge type, Face-to-Face type and Matrix type through numerical analysis by 2D-FEM and measurement. As a result, we got the result that the magnetization loss of Face-to-Face type arrangements was lower than those of other arrangement types under the conditions of the same stacking number. We think that the result was due to shield effect by demagnetization of adjacent HTS tapes which are located face to face.

Effect of Field Orientation on Magnetization Loss in a Stacked Bi-2223 Conductor (자장방향이 적층 Bi-2223도체의 자화손실에 미치는 영향)

  • 류경우;김현준
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.16 no.1
    • /
    • pp.77-82
    • /
    • 2003
  • The ac loss is an important issue in the design of high-Tc superconducting power devices such as transformers and cables. In these devices many Bi-2223 tapes are closely stacked together and exposed to alternating magnetic fields that can have different orientations with respect to a tape. In such arrangement the magnetization loss is influenced by the screening current induced in adjacent tapes and thus different from that in a single tape. This stacking effect was experimentally investigated by measuring the magnetization loss in a stack, which consists of a number of tapes. First the magnetization loss in the single tape was measured in order to confirm the reliability of the loss data measured in the stack. The results for the single tape coincide well will the loss characteristics described in other previous works. For the stack In parallel and longitudinal magnetic fields the measured loss is Independent of both the number of tapes and stacking type. The longitudinal magnetization loss Is well explained rather by the slab model for decoupled filaments. For the tall stack in perpendicular field the measured loss at low fields is greatly decreased, compared to the loss of the single tape. However the loss at high fields is unaffected. These loss behaviors in the tall stack are well described by the slab model for full coupling.

Magnetization Loss Characteristics of a Stacked Bi-2223 Conductor (적층 Bi-2223도체의 자화손실 특성)

  • Ryu, Gyeong-U;Han, Hyeong-Ju;Choe, Byeong-Ju;Na, Wan-Su;Ju, Jin-Ho
    • The Transactions of the Korean Institute of Electrical Engineers B
    • /
    • v.51 no.10
    • /
    • pp.554-559
    • /
    • 2002
  • The at loss is an important issue in the design of superconducting cables and transformers. In these devices the Bi-2222 tapes are usually placed face-to-face. In such arrangements ac loss is influenced by adjacent tapes. The effect is investigated by measuring the magnetization loss in the stacked conductor, which consists of various numbers of Bi-2223 tapes. For the single tape the magnetization loss in perpendicular field is larger than that in parallel field by about a factor 10. This agrees well with the prediction for hysteresis loss in slab and strip models. For the stacked conductor in perpendicular field the magnetization loss at low fields is greatly decreased, compared to the loss of the single tape. However the loss at high fields is nearly unaffected. This behavior is well described by the slab model.

Pre-quantized Image Compression using Wavelet Transform (선 양자화법에 의한 웨이블릿 영상압축)

  • Piao, Yongri;Kim, Seok-Tae
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.1
    • /
    • pp.405-408
    • /
    • 2005
  • This paper proposed the method to images of losses using restorable wavelet transformation. The algorithm proposed in this work stars by processing the pre-quantizer on the original images to organize an image that matches the gray level. The wavelet transformation filter to the original image which is already pre-quantized in order to segment bands. Considering the lowest coding of bands influencing the most to the overall condition of the reconstructed image, it only uses the Huffman coding using prediction. Reconstructed images by proposed algorithm showed higher PSNR when coding images of JPEG or non pre-quantized images. Applying pre-quantizer can control the peak errors and is expected to be useful at mass image compression.

  • PDF