• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.18-28
• /
• 2014

We assume that two control moment gyros are installed for space qualification in a satellite with four reaction wheels, and study the high agile maneuver method. Using high torque control moment gyros, we reduce the satellite's attitude error. After that, we activate reaction wheels to control remaining attitude error. This proposed method can avoid singularity problem of control moment gyros, and do not require gimbals' angle to calculate torque command. Through numerical simulations, we show that our method's agile performance is similar to previous method and reduce the reaction wheels' required momentum.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.2
• /
• pp.107-119
• /
• 2013

We study three axis attitude control method including two axis high agile maneuver using four reaction wheels and two control moment gyros. We investigate singularity conditions due to two control moment gyros and propose singularity escape method. Based on this, we propose actuator control algorithm for high agile maneuver. Also, we propose actuator momentum management method which preserves momentum of reaction wheels and control moment gyroscopes before and after satellite attitude control. Through numerical simulation, we show that our method achieves three axis attitude control including two axis high agile maneuver and preserves actuators' momentum.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.935-945
• /
• 2011

We study X-axis or Y-axis high agile attitude control method, using four reaction wheels and two control moment gyros. Since normal satellites use same actuators, researchers design an attitude controller first, and then allocate torque commands to each actuator. However, our satellite uses both control moment gyros and reaction wheels, whose torque output differences are very large. Therefore, we cannot apply normal attitude controller design procedure. In this paper, we solve this problem by combining actuator torque command and attitude controller. Through numerical simulations, we show that our method enables satellite high agility.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.853-861
• /
• 2016

This paper deals with a new technique utilizing the angular speed of the reaction wheels to determine attitudes and angular rates for gyroless satellites. The suggested algorithm in this study is designed to determine the precise attitude and angular rates under actual space environments by the support of the angular speeds of reaction wheels based on the extended Kalman filter. Furthermore, the proposed approach is also designed to estimate not only the attitude and angular rates of spacecraft but the external disturbances. The numerical simulation was conducted for gyloless spacecraft installed with four reaction wheels of the pyramid-type configuration. The performance of the proposed algorithm is verified by using numerical simulations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.4
• /
• pp.291-299
• /
• 2021

This paper presents the control logic for the momentum wheel and gimbals in the CMG system. First, the design of the control logic for the momentum wheel is described in consideration of the power consumption and stability. Second, the design of the control logic for the gimbals considering the resonance of the vibration absorber and stability is explained. Third, the measurement configuration for the force and torque generated by the CMG is described. Fourth, the results of the frequency and time response test of the momentum wheel and gimbals are shown. Last, the measurements of the force and the torque generated through the CMG are explained.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.100-100
• /
• 2003

다목적실용위성 1호의 자세제어는 추력기를 이용한 방법과 반작용 휠을 이용한 방법으로 나눌 수 있다. 추력기를 이용한 방법은 위성이 안전모드에 진입하거나 궤도조정시 이용되며, 정상 운영모드에서 촬영임무를 수행할 때는 반작용 휠을 이용하여 위성의 자세를 제어하고 있다. 자세제어는 제로 모멘텀 바이어스(Zero Momentum Bias)를 이용하여 3축 제어방식을 사용하고 있다. 지구센서(CES, Conical Earth Sensor)와 자이로(Gyro)를 통하여 얻은 자세정보를 이용하여 위성의 탑재컴퓨터에서 제어로직을 수행하면 MDE(Motor Drive Electronic)를 통해 모멘텀을 입력받아 반작용 휠의 회전속도를 변화 시켜 자세제어를 수행한다. 본 논문은 위성의 임무기간 동안 반작용 휠을 이용하여 자세제어를 수행한 결과를 바탕으로 위성의 제로 모멘텀 바이어스를 통한 자세제어계의 변화를 분석하여 향후 연장 임무기간 동안 발생할 수 있는 운영상의 문제점을 확인하고, 이에 대한 조치 방법과 자세제어계의 운영 방안을 제시하고 한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.127-132
• /
• 2017

In this paper, we propose a controller gain based on model based design and implement the two-wheel inverted pendulum type robot using NXT Lego and RobotC language. Two-wheel inverted pendulum robot consists of NXT mindstorm, servo DC motor with encoder, gyro sensor, and accelerometer sensor. We measurement wheel angle using bulit-in encoder and calculate wheel angle speed using moving average method. Gyro measures body angular velocity and accelerometer measures body pitch angle. We calculate body angle with complementary filter using gyro and accelerometer sensor. The control gain is a weighted value for wheel angle, wheel angular velocity, body pitch angle, and body pich angular velocity, respectively. We experiment and observe the effect of two-wheel inverted pendulum with respect to change of control gains.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.26-33
• /
• 2019

Control moment gyro (CMG) employed as satellite actuators, generates a large torque through the steering of its gimbals. Although each gimbal holds a high-speed rotating wheel, the wheel imbalances induces disturbance and degrades the satellite control quality. Therefore, the disturbances ought to be detected and identified as a precaution against actuator faults. Among the method used in detecting disturbances is the state observers. In this paper, we apply a continuous second order sliding mode observer to detect single disturbances/faults in CMGs. Verification of the algorithm is also done on the hardware satellite simulator where four CMGs are installed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.9-13
• /
• 2009

In the three axis control of Low Earth Orbit (LEO) satellite by using reaction wheel and gyro, a reaction wheel produces the control torque by the wheel speed or momentum, and a gyro carries out measuring of the attitude angle and the attitude angular velocity. In this paper, the dynamic modelling of LEO is consisted of the one from the rotational motion of the satellite with basic rigid body model and a flexible model, in addition to the reaction wheel model. A robust controller $(H_\infty)$ is designed to stabilize the rigid body and the flexible body of satellite, which can be perturbed due to disturbance, etc. The result obtained by $H_\infty$ controller is compared with that of the PI (Proportional and Integration) controller, which has been traditionally using for the stabilizing LEO satellite.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.65-73
• /
• 2004

CMG(Control Momentum Gyro) is a control device being used for spacecraft attitude control constructing relatively large amount of torque compared to conventional body-fixed reaction wheels. The CMG produces gyroscopic control torque by continuously varying the angular momentum vector direction with respect to the spacecraft body. The VSCMG(Variable Speed Control Momentum Gyro) has favorable advantages with variable speed to lead to better control authority as well as singularity avoidance capability. Attitude dynamics with a VSCMG mounted on a two-axis gimbal system are derived in this study. The dynamic equation may be considered as an extension of the single-axis counterpart. Also, a feedback control law design is addressed in conjunction with the dynamic equations of motion.