• Journal of Digital Convergence
• /
• v.19 no.10
• /
• pp.241-246
• /
• 2021

Although there have been many studies on laws and systems for the proliferation of autonomous vehicles, studies on the activation of autonomous vehicles from a strategic perspective are insufficient. This study examines the issues and problem solving methods of autonomous vehicles. Based on this, plans to activate autonomous vehicles from a strategic point of view are proposed. In order to solve the issues and problems of autonomous vehicles, it is necessary to clearly establish legal and institutional standards based on the reinforcement of the safety of autonomous vehicles. In the event of a traffic accident, who is responsible for the accident and responsibility for compensation should be prioritized. Diffusion strategies are established according to the level of autonomous driving for the activation of autonomous vehicles in strategic perspective. In addition, governmental support policies should be used as triggers for initial activation, and marketing mix strategies should be implemented based on segmentation, targeting, and positioning strategies.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.2
• /
• pp.105-112
• /
• 2016

This paper presents the experimental setup for autonomous navigation of a robotic vehicle for touring university campus. The robotic vehicle is developed for navigation of specific areas such as university campus or play parks. The robotic vehicle can carry two passengers to travel short distances. For the robotic vehicle to navigate autonomously the specific distance from the main gate to the administrative building in the university, the experimental setup for SLAM is presented. As an initial step, a simple method of following the line detected by a single camera is implemented for the partial area. The central line on the pavement colored with two kinds, red and yellow, is detected by image processing, and the robotic vehicle is commanded to follow the line. Experimental studies are conducted to demonstrate the performance of navigation as a possible touring vehicle.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.214-227
• /
• 2021

The purpose of this study is to find the driving difficulty of automated vehicles in terms of road infrastructure operation. It was judged out of this study that the level of automated driving would be enhanced if the road situation recognition ability was advanced through the presentation of infrastructure information during the difficult driving situations. The difficulty evaluation index was divided into three stages, and a survey of experts and an AHP were conducted. The result of the AHP showed that the driving difficulty of the interrupted flow was much higher than that of the uninterrupted flow. The AHP results also showed that and the driving difficulty of unsignalized intersections and roundabouts under an interrupted flow was evaluated as the highest. The top six driving situations with high difficulty were also evaluated to occur under unsignalized intersections and roundabouts.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.103-116
• /
• 2022

The South Korean Ministry of Land, Infrastructure, and Transport designated seven automated driving test beds required to evaluate vehicle performance every year for the expansion of mobility services based on automated driving. As a fundamental study, we suggested a necessary example of evaluating the performance with a satisfaction survey for the services before the evaluation. First, we surveyed the perception of automated driving services of users and the public in Sejong-si, South Korea. The survey showed that the users had a higher level of awareness of automated driving technology and intention to use it than the public. Second, the satisfaction survey was conducted on demand-responsive public transportation and automated driving service users. Notably, using the Wilcoxon Rank Sum Test, among the non-parametric statistical analysis methods, we found that safety-related factors affected the overall satisfaction of users of automated driving services. On the other hand, in the case of the demand-responsive public transportation service users, factors related to service convenience affected overall satisfaction. Hence, the results of these surveys are expected to be used as basic data and guidelines to improve the quality of automated driving services and policy establishment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.15-23
• /
• 2020

Automated driving car is drawing attention as a seminal service representing 4th industrial revolution era based on 5G network, AI, IOT and sensor technology. automated driving car is expected to evolve into the final level which does not require driver's input. Drivers are able to consume new additional time in private space. Many industries started to compete to control these time and space. Media industry is expecting quite big change due to the introduction of automated driving cars. This research examines the impact of the media industry and social & institutional issues of automated driving cars based on depth interviews of experts. The introduction of automated driving cars is giving new opportunity for media industry as contents provider. Telcos and IT corporations are expected to compete each other to get the control of infotainment systems of automated driving cars. The reform of current regulations regarding car driving is pointed as important task to protect private information and the introduction of automated driving cars.

• Journal of Internet Computing and Services
• /
• v.23 no.2
• /
• pp.53-59
• /
• 2022

After the 3rd level autonomous driving vehicle, the 4th and 5th level of autonomous driving technology is trying to maintain the optimal condition of the passengers as well as the perfect driving of the vehicle. However current autonomous driving technology is too dependent on visual information such as LiDAR and front camera, so it is difficult to fully autonomously drive on roads other than designated roads. Therefore this paper proposes a Braking Strength Calculation System (BSCS), in which a vehicle classifies road conditions using data other than visual information and calculates optimal braking strength according to road conditions and driving conditions. The BSCS consists of RCDM (Road Condition Definition Module), which classifies road conditions based on KNN algorithm, and BSCM (Braking Strength Calculation Module), which calculates optimal braking strength while driving based on current driving conditions and road conditions. As a result of the experiment in this paper, it was possible to find the most suitable number of Ks for the KNN algorithm, and it was proved that the RCDM proposed in this paper is more accurate than the unsupervised K-means algorithm. By using not only visual information but also vibration data applied to the suspension, the BSCS of the paper can make the braking of autonomous vehicles smoother in various environments where visual information is limited.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.107-118
• /
• 2022

As connected and automated driving(CAD) technology is entering its commercialization stage, service platforms providing CAD-based mobility services have increased these days. However, CAD-baded mobility services with these platforms need more consideration for the demand for mobility services when determining target areas for CAD-based mobility services because current CAB-based mobility design focus on driving performance and driving stability. For a more efficient design of CAD-based mobility services, we analyzed the applicability for the introduction of CAD-based mobility services in terms of driving difficulty of CAD and demand patterns of current non-CAD based-mobility services, e.g., taxi, demand-responsive transit(DRT), and special transportation systems(STS). In addition, for the spatial analysis of the applicability of the CAD-based mobility service, we propose the Index for Autonomous Driving Applicability (IADA) and analyze the characteristics of the spatial distribution of IADA from the network perspective. The analysis results show that the applicability of CAD-based mobility services depends more on the demand patterns than the driving difficulty of CAV. In particular, the results show that the concentration pattern of demand in a specific road link is more important than the size of demand. As a result, STS service shows higher applicability compared to other mobility services, even though the size of demand for this mobility service is relatively small.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.280-298
• /
• 2021

As the development automated vehicles(AV) actively progresses around the world, the demand for a reasonable and systematic evaluation method for AVs is increasing. Research on scenarios, evaluation procedures, and methods for evaluating AVs conducted in simulations and proving ground(PG) is actively conducted internationally. In contrast, methods and procedures for evaluations on real roads are still in their infancy internationally. Therefore, it is necessary to conduct research on evaluating AVs on real roads in preparation for future use of AVs. This study aims to define the basic direction for evaluating the driving safety of AVs on real roads. To this end, the evaluation direction and process of AVs were presented on the real roads, and qualitative and quantitative evaluation indicators were selected to evaluate driving safety. A total of 38 items were selected based on the Road Traffic Act as qualitative evaluation items for evaluating the driving safety of AVs on real roads.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1298-1299
• /
• 2015

이동 로봇의 자기 위치 인식 방법으로 GPS를 많이 이용하지만 건물 내부공간에서는 위성신호 수신 장애가 있기 때문에 GPS 사용이 어렵다. 이에 대한 대안으로 다양한 형태의 실내 측위 기술에 관한 연구가 진행되어왔다. 최근에는 WiFi를 이용한 방법이 일부 상용화 되고 있으나 정밀도가 3~5m라는 한계가 있으며, LED 조명을 이용한 방법은 실용화 단계에 이르지는 못했지만 많은 연구가 진행되고 있다. 당 연구실에서도 LED조명을 기반으로 한 실내위치 인식 시스템을 개발하였으며, 지난 연구에서는 이를 이용한 이동로봇의 자율주행을 연구하였다. 본 연구에서는 지난 연구에 덧붙여 두개의 수신부를 이용하여 로봇의 방향인식오류 개선 및 이동 로봇의 자율주행을 보여주고자 한다. 제시된 시스템은 이동로봇, 조명제어장치 그리고 컴퓨터로 구성된다. 이동로봇은 상용화된 마이크로 마우스에 탑재된 조명신호 수신장치를 통하여 자신의 위치와 방향을 감지하며, 컴퓨터와의 Wi-Fi 통신으로 자신의 위치를 컴퓨터에 전송하거나 위치 명령을 수신한다. 컴퓨터에서는 수신 받은 이동로봇의 위치를 실시간으로 화면에 표시하며, 이동로봇에 전달할 위치명령을 사용자가 입력하는 기능을 제공한다. 사용자가 이동경로를 설정한 후 이동로봇으로 명령을 보내면 로봇은 자신의 위치와 목적지를 비교하며 자율주행을 하게 된다. 실험을 통하여 확인한 결과 지난연구의 방향인식의 문제점이 해결되어 제시된 시스템으로 실내공간에서도 이동로봇의 자율주행이 원만히 이루어짐을 확인하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.237-242
• /
• 2019

Recently, as the public interest in autonomous cars has increased, research and technology development of related companies for the commercialization of autonomous cars have been actively carried out, and the development has progressed to a stage where they are partially but actually used. However, in March 2018, Uber and Tesla cars caused two fatal accidents, and the need for a new system is emerging. Therefore, this paper suggests a new information processing model for autonomous driving car system by supplementing the cause of recognition errors caused by the cause of death by focusing on the accident of autonomous driving car.