• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1991.04a
• /
• pp.43-47
• /
• 1991

For the structural analysis of optimum form decision of 3-D free fort structure such as ship, plane, automobile, definition of versatile forms and comparision between them satisfying the design criterion, is essential. In this paper, three dimensional free-form structure and it's variation are defined and attempts were made to obtain geometric form information for structural analysis. The validity of the method ks been tested for a particular free-form model selected.

• Computational Structural Engineering
• /
• v.5 no.2
• /
• pp.79-85
• /
• 1992

For the structural analysis of optimum form decision of 3-D free form structure such as ship, plane, automobile, definition of versatile forms and comparision between them satisfying the design criterion, is essential. In this paper, 3-D free form structure and it's variation are defined and attempts were made to obtain geometric form information for structural analysis. The validity of the method has been tested for a particular free model selected.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.667-669
• /
• 2003

특징 형상의 조합으로 표현될 수 없는 자유 형상을 가진 제품이 늘어남에 따라 자유형상을 효율적으로 변형시키는 기법이 필요하다. 여러 가지 자유형상 변형기법(FFD) 가운데에서 자유 형상을 파라메트릭하게 컨트롤하기 위해서는 조정 다각형 기반의 형상 변형 기법이 적합하다. 이에 따라 본 연구에서는 FFD 기법을 적용하여 자유형상 모델을 파라메트릭하게 컨트롤하기 위해 입력 모델에 대한 조정 다각형을 자동으로 생성하는 알고리즘을 제안하였다. 제안된 알고리즘은 크게 기본 조정 다각형 생성과 조정 다각형 최적화 단계로 나누어진다. 기본 다각형 생성에서는 1)입력모델을 직교 3방향에 투영, 2)투영된 결과에 대해 2차원 조정 다각형을 생성, 3)2차원 조정 다각형을 조합하여 3차원 기본 조정 다각형 생성의 단계를 거친다. 조정 다각형 최적화 단계에서는 기본 조정 다각형에 에지 및 면 연산자를 적용하여 입력 모델에 더욱 근사하는 최종 조정 다각형을 생성한다. 예제에서는 제안된 알고리즘을 통해 자동으로 생성된 조정다각형을 자동차 모델에 적용하여 모델의 형상을 변화시킨 결과를 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.290-296
• /
• 2019

Head-up displays for vehicles play an important role in displaying various information about the safety and convenience of driving on the windshield of the vehicle. In this study, ultra-precision machining was performed and evaluated as a method for machining a large-area aspheric free-form mirror that is applicable to augmented reality technology. Precision diamond cutting is highly accurate and suitable for the production of advanced parts with excellent surface integrity, low surface roughness, and low residual stress. By using an aspheric free-form mold, it is possible to improve the optical transfer function, reduce the distortion path, and realize a special image field curvature. To make such a mold, the diamond cutting method was used, and the result was evaluated using an aspherical shape-measuring machine. As a result, it was possible to the mold with shape accuracy (PV) below $1{\mu}m$ and surface roughness (Ra) below $0.02{\mu}m$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.330-334
• /
• 1992

현재 제품의 보다 향상된 의장성과 기능성을 위해서 정밀한 자유곡면 형상의 제품에 대한 수요가 증가함에 따라 자유곡면 형상 제품의 효율적이고 정밀한 설계 및 가공과 함께 제품에 대한 수치 검사가 더욱 중요해지고 있다. 이러한 자유곡면 형상 제품의 예로는 금형, 헬리콥터 프로펠러, 비행기 날개 등이 있다. 이러한 제품의 설계 및 가공을 위해서 많은 CAD/CAM 시스템이 개발되었다. 수치 검사 분야에서는 기하학적으로 복잡한 제품에 대한 정밀하고 효율적인 검사를 위해서, 3차원 좌표측정기을 포함한 컴퓨터의 구동의 수치 검사 장비가 개발되고, 그러한 장비를 이용한 CAI 시스템사용이 다양한 분야에서 점차 증가하고 있다.

• Journal of the Korea Convergence Society
• /
• v.7 no.5
• /
• pp.175-180
• /
• 2016

The demand for accurate freeform apsheric surface is increasing to satisfy the optical performance. In this paper, we develop the algorithm for opto-mechatronics convergence, that reconstruct the surface 3D profiles from the curvarure data along two orthogonal directions. A synthetic freeform surface with 8.4 m diameter was simulated for the testing. The simulation results show that the reconstruction error is 0.065 nm PV(Peak-to-valley) and 0.013 nm RMS(Root mean square) residual difference. Finally the sensitivity to noise is diagnosed for probe position error, the simulation results proving that the suggested method is robust to position error.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.59-66
• /
• 2017

In the case of fluid storage structure, hydrostatic pressure acts on the structure due to fluid surge during an earthquake. At this time, hydrodynamic pressure of the fluid charge not only by the strength of the earthquake but also by the sloshing height of the fluid. Factors affecting the change of load include the size, width and height of the fluid storage structure and height of fluid, time-history shape, etc. This paper wanted to identify the relationship between the earthquake shape and fluid free surface shape. The sloshing height measured the height of the fluid by applying earthquake to a tank whose width 500mm and comparison of the experiment and analysis. In addition, the shape of the fluid free surface was measured while varying the shape of earthquake and effective of the shape of earthquake of the fluid was analyzed.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.8-17
• /
• 1992

There has been considerable reseach on the representation of a hull form which is a 3-dimensional free surface. A form parameter method to describe the hull form by means of form parameters which represent the characteristics of the given hull form geometry has been recently paid special attention with the advent of powerful computer. However, there have been reported many problems to the conventional form parameter for the practical hull form generation. In the present paper, an attempt has been made to creak hull form by combining the form parameter method with the B-spline curve which can be best fitted to free surfaces. In an application, the present method is used to generates a Bulk carrier hull form and compared with the existing hull form to prove its applicability for the hull form generation.

• Journal of computational fluids engineering
• /
• v.2 no.2
• /
• pp.73-79
• /
• 1997

VOF 방법에 의한 자유표면 유동계산의 정확성을 개선하기 위해 이차정도 모델을 개발하였다. 개발된 이차원 모델의 정확성을 비교하기 위하여 여러 가지 크기의 원형 및 Solitary wave형상의 자유표면 유동을 통하여 기존에 개발된 두 가지의 일차정도 모델과 비교하였다. 비교결과 반경이 큰 원과 같이 곡률이 작은 형상의 경우에는 일차정도 모델도 비교적 정확한 결과를 보여주고 있으나 작은 반경의 원형이나 Solitary wave와 같이 곡률이 큰 형상의 경우 일차정도 모델은 많은 오차를 보여주는 반면에 이차정도 모델은 어느 경우에나 매우 정확한 결과를 보여준다.

• Korean Journal of Optics and Photonics
• /
• v.25 no.5
• /
• pp.273-278
• /
• 2014

We present an algorithm for surface reconstruction from the second-derivative data for free-form aspherics, which uses a subaperture scanning system that measures the local surface profile and determines the three second-derivative values at those local sampling points across the free-form surface. The three second-derivative data were integrated to get a map of x- and y-slopes, which went through a second Southwell integration step to reconstruct the surface profile. A synthetic free-form surface 200 mm in diameter was simulated. The simulation results show that the reconstruction error is 19 nm RMS residual difference. Finally, the sensitivity to noise is diagnosed for second-derivative Gaussian random noise with a signal to noise ratio (SNR) of 16, the simulation results proving that the suggested method is robust to noise.