• Journal of computational fluids engineering
• /
• v.2 no.2
• /
• pp.73-79
• /
• 1997

VOF 방법에 의한 자유표면 유동계산의 정확성을 개선하기 위해 이차정도 모델을 개발하였다. 개발된 이차원 모델의 정확성을 비교하기 위하여 여러 가지 크기의 원형 및 Solitary wave형상의 자유표면 유동을 통하여 기존에 개발된 두 가지의 일차정도 모델과 비교하였다. 비교결과 반경이 큰 원과 같이 곡률이 작은 형상의 경우에는 일차정도 모델도 비교적 정확한 결과를 보여주고 있으나 작은 반경의 원형이나 Solitary wave와 같이 곡률이 큰 형상의 경우 일차정도 모델은 많은 오차를 보여주는 반면에 이차정도 모델은 어느 경우에나 매우 정확한 결과를 보여준다.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.70-76
• /
• 1997

수치격자의 크기제한에 의한 자유표면 유동해석 문제를 효율적으로 다루기 위하여 자유표면의 모든 격자를 x 방향으로 4,8,12개로 등분할 하고, y 방향으로는 4개로 잘라서 계산하였다. 이중격자 또는 삼중격자로 Navier-Stokes 방정식의 각항에 크기가 다른 격자를 사용해 효율을 향상시키는 계산방법의 연장으로, 본 논문에서는 자유표면 방정식에 보다 세분화된 격자를 적용해, Marker Particle 이동 및 자유수면 형성에 효율향상을 줄수 있는 수치방법을 도입하였다. 계산결과에 의하면 초기사용 격자가 coarse한 경우가 본방법의 효과가 커짐을 알 수 있고 대상물로는 층류유동에서 Wigley모형과 낭류유동의 S103 모형이다.

• Journal of Adhesion and Interface
• /
• v.4 no.4
• /
• pp.1-6
• /
• 2003

After atmospheric pressure plasma treatment of polypropylene(PP) film surface, we measured the contact angle of the surface by using polar solvent (water) and non-polar solvent (diiodomethane). We also calculated the surface free energy of PP film by using the measured values of contact angles. And then we analyzed contact angle and surface free energy with changing the condition of atmospheric pressure plasma treatment. Upon each condition of atmospheric plasma treatment, contact angle and surface free energy showed an optimum value or leveled off.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.1
• /
• pp.17-24
• /
• 2017

We propose an efficient method to express water spray effects by adaptively modeling air particles in particle-based water simulation. In real world, water and air continuously interacts with each other around free surfaces and this phenomenon is commonly observed in waterfall or sea with rough waves. Due to thin spray water, the interfaces between water and air become vague and the interactions between them lead to heavy vortex phenomenon. To express this phenomenon, we propose methods of 1) generating adaptive air cell in particle-based water simulation, 2) expressing water spray effects by creating and evolving air particles in the adaptive air cells, and 3) guaranteeing robustness of simulation by solving drifting problem occurred when adjacent air particles are insufficient. Experiments convincingly demonstrate that the proposed approach is efficient and easy to use while delivering high-quality results.

• Journal of the Korean Society of Visualization
• /
• v.3 no.1
• /
• pp.51-57
• /
• 2005

Vertices terminating at free surface have been investigated extensively. Most of investigations, however, are focused on surface parallel vortices and little has been known about surface normal vortex or columnar vortex. Visualized experimental results utilizing LIF technique are discussed fur the purpose of characterization of columnar vortex interacting with a clean and a contaminated free surfaces and a solid body interface in the present investigation. The results reveal that surface tension changes due to surface contamination although bulk viscosity remains constant and eventually the behavior of a columnar vortex interacting with a contaminated free surface and a solid body interface are totally different from the clean free surface case.

• Journal of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.18-25
• /
• 1968

액체 분자는 고체, 천이상태 및 기체와 같은 자유도를 갖는다는 액체구조에 관한 천이상태이론을 적용하여 액체의 표면장력과 점도를 계산하여 측정 치와 좋은 일치를 얻었다. 표면장력을 계산함에 있어서 표면 각층의 밀도는 이웃 층 사이의 밀도를 주는 관계식으로부터 쉽게 얻었다. 그리고 액체가 점성 흐름을 할때 활성화된 분자는 흐르는 방향으로는 기체와 같은 자유도를 가지나, 이에 직교한 평면상에서는 천이상태 및 기체와 같은 자유도를 갖는다고 가정하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.16-27
• /
• 2002

A level-set method is used for analyzing the behaviors of gas bubbles in two fluids incompressible viscous flow domain. The governing equations are solved by using a finite volume method. The numerical results are verified by comparing with the experimental and other computational results. Computations for the deformations and motions of one or multi-bubbles in the flow domain with the initial undisturbed free interface are conducted. It can be seen that numerical results for different surface tension and density ratio arise very different behaviors of bubbles. When bubbles rise near the free interface, the free interface gives some great influence on the behaviors of bubbles. The present results computed by a level-set method give useful information about the properties of bubble motions and deformations.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.98-105
• /
• 2003

The surface energy and the effect of functional groups on the surface of the ozone-treated low-density polyethylene (LDPE) film were studied. Treatment conditions were treatment time, total amount of transferred ozone, and ozone concentration. The introduction of polar groups on the surface of LDPE film after ozone treatment was confirmed by FTIR-ATR and XPS analyses. Surface fee energy of the LDPE film was examined by a contact angle method. The ozone treated-LDPE film showed a decreased water contact angles about 15$^{\circ}$ mainly due to the increased concentration of oxygen-containing functional groups, which was attributed to the increased surface free energy or $O_{IS}/C_{IS}$Also, the concentrations of the oxygen-containing functional groups on the surface of LDPE film increased with ozone treatment time and concentration, whereas no significant effects were found for the total amount of transferred ozone. From the dyeability test using Kubelka-Munk equation, it was found that the ozone treatment plays an important role in the growth of oxygen-containing functional groups of LDPE film, resulting in the improvement of dyeability for basic dyeing agent.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.88.2-88.2
• /
• 2005

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.8-15
• /
• 2002

A two-dimensional higher order panel method using B-splines has been developed to overcome the disadvantages of the low order panel method and to obtain more accurate solution. The sources and the normal dipoles are distributed on both the body and the free surface. Instead of applying the upwind finite difference schemes to satisfy the linearized free surface and the radiation condition, the derivatives of the basis functions of the B-splines are directly applied to the linearized free surface condition. Numerical damping in the Dawson's method are avoided in the Present computations. In order to validate the present method, numerical computations are carried out for a submerged cylinder and a two-dimensional hydrofoil steadily moving beneath a free surface. The numerical results show that fast convergence and better accuracies have been achieved by the present method.