• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.343-348
• /
• 2010

The surface of low density polyethylene (LDPE) film was oxyfluorinated under different reaction conditions to introduce hydroperoxide groups and change surface characteristics. Hydroperoxide functional groups created by oxyfluorination were used as active sites for graft polymerization with hydrophobic monomer, acryl amide (AM), and hydrophilic monomer, methyl methacrylate (MMA) to carry out the second modification of the LDPE film surface. The surface properties of the OFPE films and grafted OFPE films were characterized by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging method, ATR-IR, contact angle measurement and DSC. From the results of DPPH method, the amount of hydroperoxide groups on the oxyfluorinated LDPE film continuously increased as the total pressure in the oxyfluorination and the partial pressure of fluorine gas increased. The water contact angle and surface free energy measurements showed that hydrophilic liquid (water) contact angle on LDPE film surface decreased with hydrophilic AM grafting and hydrophobic liquid (methylene diiodide) contact angle on LDPE film surface decreased with hydrophobic MMA grafting. These were attributed to AM or MMA monomer grafting and the wettability of LDPE filmsurface to hydrophilic and hydrophobic liquids were improved.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1436-1444
• /
• 2002

A three dimensional numerical model was developed to analyze the mold filling and solidification processes straightforwardly in a casting processes. On the basis of the SIMPLER algorithm, the VOF method and the Equivalent Specific Heat method were adopted to deal with the free surface behavior and the latent heat evolution. The complete model has been validated using exact solutions and experimental results. The importance of three-dimensional effects has been highlighted by comparing the results from the three-dimensional analysis with those given by a two-dimensional analysis.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2001.06a
• /
• pp.77-94
• /
• 2001

본 논문은 영어에 있어 부사의 분포를 통사-의미론적으로 설명함을 목적으로 한다. 영어부사의 분포는 표면상 문장 내에서 매우 자유로운 듯하여 이 분포의 자유가 부사의 이동에 기인한다는 주장도 나왔으나, 본고에서 저자는 의미상 그리고 하위범주화상 부사의 이동은 있을 수 없음을 주장하고, 나아가 부사의 분포는 사실상 자유롭지 않고 매우 제한되어 있다는 언어학자들(Jackendoff(1972), Travis(1988), Cinque(1999))의 자료를 제시했다. 부사는 문장 내의 위치에 제한을 받을 뿐만이 아니라 부사들 사이의 상대적 순서에도 제한을 받는데 본고에서는 여러 학자들의 분석 중 가장 최근의 분석인 Cinque(1999)의 이론을 중점적으로 고찰하고 그 문제점을 지적했다. Cinque의 부사분포를 설명하려는 이론은 지나치게 복잡화된 기능범주투사를 필수요건으로 하는데 이는 통사적으로 너무 많은 값을 치루기에 비경제적이다. 저자는 부사의 의미유형에 따라 영향을 받는 부사의 상대적 순서 효과는 통사적 해결이 아니라 의미유형들의 작용역 관계에 기반한 의미적 해결을 하여야 하며, 부사의 문장 내 분포는 부사를 크게 세 가지 의미유형으로 나누고 이 각각의 의미유형이 최근 Chomsky에서 논의되고 있는 세 가지 국면에 사상된다고 가정하면 포착될 수 있다고 주장하였다.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.74-83
• /
• 1997

This study is to develop a practical calculation method of hydrodynamic force and motion response on very large floating structures of multiple legs. To investigate the effecr of hydrodynamic interfaction and of free surface on the reaponses of very large floating structures in regular waves, four kind of models are considered, ie. 1, 4, 64, 21248 column with footing. Based upon the results of this study, it is found that the middle parts of very large floating structures have small diffration effects. Therefore only out side parts are used to determine the hydrodynamic forcea for taking into account the effects of interaction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.755-758
• /
• 2001

Topex/poseidon 위성의 자료를 통하여 남인도양의 암스테르담- 크호제트- 케르겔른 지역에 대한 표층 순환과 해수면 변화의 시ㆍ공간적인 해석을 쉽게 수행 할 수 있었다. 각 지역에서의 시ㆍ공간적인 변화 특성들을 보면, 암스테르담지역은 서쪽으로 전파하는 로쓰비파가 존재한다. 이때 이 파는 동쪽으로 전파하는 남극순환해류의 영향을 받는다. 1993년 늦가을에서 초겨울 동안에 분지의 동부지역에서 해수면이 급격히 떨어졌다. 이곳은 남극순환해류(아규라스순환반류전선과 아열대전선)의 북부에서 발전하는 시계방향(cyclonic)의 와동류가 예외적으로 강하게 북쪽으로 상승했다가 이어서 급격히 남쪽으로 하강했던 것과 관련된다. 쌩뽈지역은 5cm 정도의 해수면 진동과 함께 약 130일 정도의 주기성을 보였다. 서쪽으로 전파하는 신호인 자유 표면의 진동이 실제로 조사되었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.6
• /
• pp.88-95
• /
• 2003

Liquid storage rectangular tank structures are used in many fields of airplane and marine engineering. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance. Therefore it is essentially important to estimate vibration characteristics of tank structures. Many Investigators studied the vibration of cylindrical and rectangular tank structures containing still fluid. In general, the eigenbehavior of interior liquid is characterized by the sloshing mode while that of the structure by the bulging mode. However, the structure deformation to the sloshing mode and the liquid free-surface fluctuation to the bulging mode have been neglected in the classical added-mass computation. in the present paper, we study the vibration characteristics with sloshing mode effect.

• Journal of Korea Foundry Society
• /
• v.12 no.1
• /
• pp.51-61
• /
• 1992

주조시 주형내의 유동해석을 위해서는 시간에 따라 변화하는 자유표면 위치에 대한 정확한 정보가 요구되는 관계로 난제로 여겨져 왔다. 따라서 대부분의 연구는 초기치 속도를 정의하기 위해서 순간충입(instantaneous filling)을 가정하여 수치 해석을 하였던 것이다. 본 연구는 Modified Solution Algorithm-Volume of Fluid Method (MSOLA-VOF)를 개발하는 주조시 주형내의 유동을 수치적으로 해석하며, 유속이 수평 주조, 수직 주조의 경우에 어떤 영향을 미치는가에 대하여 연구하였다. 결론으로 응고 연구에 있어서 초기의 순간충입은 비현실적인 가정이라는 것이 밝혀졌으며, 충입시 초기 속도 분포와 결정 생성은 밀접한 관계가 있음을 알 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.477-484
• /
• 2019

Several types of scavenger receptors, including the Collectin-Placenta 1 (CL-P1) receptorthat is present in mammals, are molecules that are expressed on the surfaces of endothelial cells, macrophages and smooth muscle cells. These molecules are cell surface glycoproteins that can be conjugated to oxidized low density lipoprotein (oxLDL). Among these molecules, the effect of quercetin on CL-P1 activation has been confirmed. Quercetin is known as an antioxidant that stops oxidation because it acts to remove free radicals that are responsible for the oxidation reaction. In this study, fragments from the transcription start site of the mouse CL-P1 gene promoter to the -500th base were cloned using DNA polymerase. These fragments were then introduced into macrophage like RAW264.7 cells and fibroblast-like NIH3T3 cells to study the effect of quercetin on the CL-P1 gene expression. As a result, we found that bases ranging from -250 to -350 in the anterior part where gene expression starts are important for producing CL-P1 protein. Among them, the DNA mutation experiments we performed confirmed that the E2F binding sites are critical for producing the CL-P1 protein? In addition, when quercetin was added to the RAW264.7 culture medium, which was a culture of adherent cells, observedthe phenomenon of the cells falling off from the surface of the culture container.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.536-547
• /
• 1997

For various angular velocities of crucible and crystal, the characteristics of melt flows, temperatures and concentrations of oxygen are numerically studied in the Czochralski furnace with a uniform axial magnetic field. Buoyancy effect due to the heating of crucible wall and thermocapillary effect due to the temperature gradient at the free surface, can be differentiably suppressed by the centrifugal forces due to the rotations of the crucible and crystal. The most important factor which yields the centrifugal forces is the rotation velocity of the crucible, that influences the fields of velocities, temperatures and concentrations. In the case that the crucible rotation velocity is not high, the rotations of the crystal gives rise to the centrifugal forces effectively.

• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.270-276
• /
• 2006

In this study, heat loss through free surface of water contained in bathtub due to conduction and evaporation has been analyzed. As a result of this study, a relational equation has been derived based on the basic theory of heat transfer to evaluate the performance of bath tubes. The derived equation was rational and quantitative. The major heat loss was found to be due to evaporation. Moreover, it has been found out that the speed of heat loss depends more on the humidity of the bathroom than the temperature of water contained in the bathtub. So, it is best to maintain the temperature of bathtub water to be between 41 to $45^{\circ}C$ and the humidity of bathroom to be 95％.