• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.815-818
• /
• 2006

This paper deals with the free, in-plane vibrations of curved members with the translational(radial and tangential directions) and rotational springs at the ends. The governing differential equations for the circular curved member are solved numerically using the corresponding boundary conditions. The lowest three natural frequencies and the corresponding mode shapes are obtained over a range of non-dimensional system parameters: the subtended angle, the slenderness ratio, the translational spring stiffness, and the rotational spring stiffness.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.716-724
• /
• 1999

In co-orbiting scroll compressor, the two scroll members are to orbit with independent radii, producing a relative orbit motion between them. One scroll member is driven by the crank mechanism while the motion of the other member is determined by geometrical constraints and reacting forces. This paper presents an analytical study on the performance of a co-orbiting scroll compressor. The following results have been obtained: Radial contact force between the scroll wraps is virtually free from the centrifugal force of the orbiting scroll member. The frictional losses are somewhat increased due to the complicated drive mechanism, yielding to a little lower EER compared to conventional radially compliant scroll compressors .

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.629-638
• /
• 2002

This paper deals with the free vibration analysis of compressive tapered members resting on elastic foundation using the Differential Quadrature Method. Based on the differential equation subjected to the boundary conditions, adopted from the open literature, which governs the free vibrations of such member, this equation is applied to the Differential Quadrature Method. For computing natural frequencies, the numerical procedures are developed by QR Algorithm, in which the Chebyshev-Gauss-Lobatto method is used for choosing the grid points. The numerical methods developed herein for computing natural frequencies are programmed in FORTRAN code, and all solutions obtained in this study are quite agreed with those in the open literature.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.81-88
• /
• 2009

This paper alined at the development of a lateral drift control method that is able to quantitatively control the lateral drift of global node. For this, we applied an efficient partial reanalysis algorithm. By using this algorithm, we could recalculate the displacement and member force of the specific node without reanalyzing the entire structure when member stiffness changes partially. The theoretical concepts of the algorithm are so simple that it is not necessary to solve the complicate differential equation or to repeat the analysis of entire structure. The proposed method calculates the drift contribution of each member for the global displacement according to the variation of section sizes by using the algorithm. Then by changing the member sizes as the order of drift contribution, we could control the lateral drift of global node with a minimum quantity of materials. 20 story braced frame structure system is presented to illustrate the usefulness of proposed method. It is shown that the proposed method is very effective in lateral drift control and the results obtained by proposed method are consistent with those of commercial analysis program.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.3 s.17
• /
• pp.91-100
• /
• 2005

The paper presents a direct method for the diplacement control and stiffness redesign using displacement and response force contribution factors. At first, these two kinds of factors are derived and the relationship between them is examined. An equation to evaluate the change of displacement according to the change of each member stiffness is proposed. For the statically determinate structures, the proposed equation gives the exact solution with no approximation. But it has some error in case of statically indeterminate structures because the redistribution of response forces is neglected in the equation. However, the equation may be very useful even for statically indeterminate structures because it provides the relationship between the member stiffness and the global displacement. The proposed method is expected to be useful for the displacement control of large space or hi-rise building structures where the stiffness design governs the design result.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.35-42
• /
• 2001

본 연구는 변화곡률 수평 곡선보의 면외 자유진동에 관한 연구이다. 뒴과 회전관성을 고려한 변화곡률 수평 곡선보의 자유진동을 지배하는 상미분방정식이 유도되었고, 이 지배미분방정식을 수치해석하여 곡선보의 고유진동수를 산출하였다. 지배미분방정식을 수치적분하기 위하여 Runge-Kutta method를 이용하였고, 고유진동수를 산출하기 위하여 Regula-Falsi method와 결합한 행렬값 탐사법을 이용하였다. 본 연구의 이론적 타당성을 검증하기 위하여 타문헌의 고유진동수와 비교하였고, 실험실 규모의 모형실험을 실시하여 이론값과 실험값의 고유진동수를 비교하였다. 수치해석의 결과로 무차원 재변수들의 변화에 따른 무차원 고유진동수를 제 3모드까지 산출하였고, 그 결과들을 고찰하였다. 본 연구의 결과는 곡선형 교량 등과 같이 곡선부재로 이루어진 구조물의 설계시에 유용하게 이용될 수 있을 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2169-2179
• /
• 2013

The compressive strengths of simply supported columns may be significantly increased by reinforcing them with an assemblage of cross-arms and stayed struts connecting both ends of the columns and the cross-arm members. The purpose of the stayed struts and cross-arms is to introduce partial restraints against translation and rotation, thereby decreasing the effective buckling length of the column. In this study, buckling strengths of the assembled column system have been quantitatively evaluated from the theoretical methods based on both the equivalent spring model and the stiffness matrix formulation. And the results were compared with those from elastic/inelastic analysis using a finite element analysis package program, ABAQUS, for verification purpose. Expected compressive strength curves have been proposed for the assembled column system as a function of slenderness ratio of the simply supported column.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.5-12
• /
• 1997

최근 지진에서 발생한 건물의 손상을 살펴보면, 지진하중을 받는 건물의 3차원 거동에 의해서만 설명할 수 있는 경우가 많이 있다. 특히, 비대칭의 평면을 가지는 건물에서 발생하는 비틀림 거동은 2차원 모델로는 파악하기가 어렵기 때문에 구조물과 개별 부재의 3차원 거동을 보다 정확히 이해함으로써 구조물의 내진능력을 더 정확히 평가할 수 있다. 이를 위해서는 3차원 모델에 의한 비탄성 동적해석이 필요하게 된다. 현재, 전산기의 발달과 더불어 많은 자유도를 요구하는 3차원 구조물의 비탄성해석이 가능해지고, 구조부재의 비탄성거동에 관한 많은 실험으로 다양한 구조부재의 모델이 개발되어 지진에 대한 건물의 설계시 개인용 컴퓨터를 사용하여 이러한 3차원 비탄성 동적해석의 반영이 가능하게 되었다. 실제로 지진이 많이 발생하는 국가에서는 비탄성해석에 대해 많은 연구들이 진행되고 있으며, 일부 국가에서는 건물의 내진설계시 강진에 대한 비탄성해석을 요구하고 있다. 이 글에서는 삼성건설 기술연구소에서 도곡동 102고층 건물의 해석에 사용하였던 3차원 비탄성 동적해석 프로그램인 CANNY-E에 대하여 그 구성과 특징을 소개하고자 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.137-140
• /
• 2023

오픈월드 게임에서는 주어진 퀘스트나 미션 이외에도 다양한 자유로운 활동을 할 수 있다. 이로 인해 게임 내 방향성이 불분명해지고, 사용자가 무엇을 해야 하는지 혼란스러워지는 경우가 발생한다. 사용자가 게임을 시작할 때 게임이 제공하는 다양한 옵션과 활동을 살펴보면서 진행 방식을 정하게 된다. 이때 게임이 주어지는 목표나 방향성이 모호하면 사용자는 어떤 것을 해야 하는지 혼란스러워지기 때문에 게임을 즐기는데 있어서 큰 장애물이 된다. 본 논문에서는 다른 온라인게임이나 콘솔게임 같은 경우 명확한 목표를 지정해주지만 오픈월드 게임에서는 자유도라는 무기가 과하면 오히려 독이 될 수 있으므로 이와 같은 문제 해결 방법을 제시해 본다.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.11-21
• /
• 2011

The most critical issue in free-form buildings is how to construct the free-formed exterior facade panels. Their geometric complexity delivers many cons and problems in fabricating and constructing their shapes. To construct a free-form building, first of all, its skin has to be chopped into small pieces, which is called panelization. After panelization, the panels go through an optimization process to construct them economically. The panel's geometries are modified or regenerated through this optimization process. In this study, the panel optimization process of free-form buildings are performed through a case study. The panel shapes of the case study are modeled with Digital Project. To test the constructability of the various panels, 8 mock-up panels are made and laser scanning technology is applied to measure the preciseness of the panels manufactured in comparison with their original design.