• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1581-1584
• /
• 1997

This paper poropsed an efficient optimization technuque to resolve redundancy and a trajectory planning for a high precision control using proposed optimization technique. The proposed techniqus is the joint disturbance torque optimizatioin considering redundancy in the joing servo control. Joint disturbance torque is not unknown it is described dynamic equation ignored friction and viscosity. The proposed technique is used the dynamic equatiion included the joint disturbance torque characteristics. Numerical example of 3 joint planar redundant robot manipulator is simulated. In the 2-norm minimization of joint disturbance torque we compared pseudoinverse local optimization with proposed technique, and the results showed better the proposed technique. So the proposed technique can be highly precision controlled redundant robot manipulators in the joint servo control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1545-1548
• /
• 1997

A Force-refecting hand controller can provide the kinesthetic information obtained from a slave manipulator to the operator of a teleoperation system. This thesis presents the desgn and the analysis of a 6-degree-of-freedom force-reflecting hand controller using fivebar parallel mechanism. The goal of this thesis is to construct a superior hand controller that can provide large workspace and good force-reflecting ability. The forward kinematics of the fivebar paprallel mechanism has been calculated in real-time using three pin-joint sensors in addition to six actuator position sensors. A force decomposition approach is used to comput the Jacobin. To analyze the characteristics of the fivebar parallel mechanism, it has been compared with the other three parallel mechanisms in terms with workspace and manipulability measure. The force-reflecting hand controller using the fivebar parallel mechanism has been constructed and tested to verify the feasibility of the design concept.

• 전자공학회논문지B
• /
• 제30B권10호
• /
• pp.50-58
• /
• 1993

The problem of trajectory planning in two redundant robot systems is considered. The trajectory of each robot for the cooperative task is generated so that the robots assume their optimal configurations while following a given desired task. The cooperative task compatibility in and the weighted sum of manipulabilities are proposed and investigated as quality measures. The cooperative task compatibility includes the velocity and force transmission charateristics to the task requirements and so it measures the compatibilities of robot postures with respect to a given task. The weighted sum of manipuabilities of robot postures with respect to a given task. The weighted sum of manipulabilities is also considered as a quality measure since it is helpful to avoid singularities. The usefulness of the cooperative task compatibility and the weighted sum of manipulabilities are shown by computer simulation studies.

• 제어로봇시스템학회논문지
• /
• 제5권3호
• /
• pp.288-296
• /
• 1999

A force-reflecting hand controller can provide the kinesthetic information obtained from a slave manipulator to the operator of a teleoperation system. The goal is to construct a compact hand controller that can provide large workspace and good force-reflecting capability. This paper presents the design and the analysis of a 6-degree-of-freedom force-reflecting hand controller using fivebar parallel mechanism. The forward kinematics of the fivebar parallel mechanism has been calculated in real-time using three pin-joint sensors in addition to six actuator position sensors. A force decomposition approach is used to compute the Jacobian. To evaluate the characteristics of the fivebar parallel mechanism, it has been compared with the other three parallel mechanisms in terms with workspace and manipulability measure. The hand controller using the fivebar parallel mechanism has been constructed and tested to verify the feasibility of the design concept.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1137-1142
• /
• 2004

Walking training is one of the most important rehabilitation processes with paralysis patient. Walking training by using an orthosis can help advancing a patient's independent level. However, existing orthoses have some serious demerit of mechanical problem that the knee joint is locked in the state where it is completely extended, which increases energy consumption and fatigue. For this reason, it is suggested, for more practical orthosis, that the knee joint should be placed and it should have capability of suspending patient's weight. In this paper, 1-DOF walking orthosis which compensates the demerit of the existing orthosis and secures patient's mobility has been proposed. New orthosis has been designed under the following two premises. First, the knee joint of the orthosis was designed fold in order for the orthosis to move in a walking pattern similar to that of a normal person. Second, the knee joint was designed to extend during the swing phase and lock safely during the stance phase.

• 대한기계학회논문집
• /
• 제15권5호
• /
• pp.1640-1648
• /
• 1991

본 연구에서는 이러한 편사 함수 최소화의 방법을 적용함에 있어 보다 안정된 수렴성과 계산 시간을 단축시키기 위하여 근접 위치 방법(near position method)을 개 발하여 적용하였다. 근접 위치 방법이란 이론적 해석법으로 풀기가 불가능한 기구학 을 갖는 6관절 로봇을 반복적 해석법을 사용한다는 것을 전제로 하여, 초기 위치를 목 표 위치에 가능한 근접하게 잡아서 반복 계산을 수행하는 방법으로써 로봇의 기구학적 자세에 따른 수렴의 불안정성을 방지하고, 계산 시간을 단축하는데 그 목적이 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.793-798
• /
• 1996

In this paper, output compliance effects at RCC point by both redundant joint compliances and antagonistic torques generated by internal preloading between joints of a spherical 3 degree-of-freedom mechanism are investigated. For this purpose, kinematic analysis is briefly described. Then, output compliance models at RCC point, which is generated by redundant joint compliances and by internal preloading between joints are derived. Finally, ranges of output compliance modulation due to these redundant joint compliances and antagonistic torques are examined through simulation.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.102-111
• /
• 2005

In this paper, we address a position control for a parallel stage, which is levitated and driven by electric magnetic force. This consists of a levitating object (called platen) with 4 permanent magnetic linear synchronous motors in parallel. Each motor generates vertical force for suspension against gravity and propulsion force horizontally as well. This stage can generate six degrees of freedom motion by the vertical and horizontal force. A dynamic equation of the stage system is derived based on Newton-Euler method and it's special Jacobian matrix describing a relation between the limited velocity and Cartesian velocity is done. There are proposed two control methods for positioning which are Cartesian space controller and Actuator space controller. The control performance of the Cartesian space controller is better than the Actuator space controller in task space trajectory while the Actuator space controller is simpler than the Cartesian space controller in controller realization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2711-2713
• /
• 2000

능동시각시스템의 가장 큰 장점은 주어진 환경에 대해 능동적으로 반응할 수 있는 자유도가 있어 이를 활용하여 필요한 정보를 쉽게 추출할 수 있다는 점이다. 이를 위해서는 능동시각시스템의 시선을 원하는 위치로 이동시키는 것이 필요한데, 시스템의 여자유도 인해 해가 무수히 많이 존재하게 된다. 본 논문에서는 이러한 여자유도 문제를 기구의 동역학적 특성을 제한 조건으로 하여 최적의 해를 구하고 이를 이용해 각 관절을 제어하는 제어기를 설계하는 방법에 대해 소개한다. 설계된 제어기는 제작과 실험을 통해 고속으로 움직이는 물체를 실시간으로 추적하는 성능을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.166-168
• /
• 2004

근래에 무인 자동화기술의 발달과 마이크로프로세서 기술의 혁신적인 성장에 힘입어 일반산업현장에서 사용되고 있는 로봇은 복잡하고 다양한 작업이 요구되는 비제조업분야로 그 적용분야가 확장되고 있다. 그 대표적인 분야를 들자면 방사능 지역과 같은 위험한 환경에서의 작업, 우주공간이나 심해에서의 작업, 활선 작업과 같이 사람이 접근하기 어려운 곳에서 인간을 대신하는 작업 등이 있다. 이와 같이 사람이 접근하기 어려운 지역에서 인간을 대신하여 작업을 수행할 수 있는 원격작업 로봇시스템을 개발하였다. 개발된 로봇은 6 자유도를 갖는 수평다관절 유압구동형 조작기로써 로봇의 운반 및 설치가 용이하도록 제 1 링크의 분리가 가능하도록 설계하였다. 로봇의 제어기는 전체 제어기를 통괄하는 1 개의 마스터 CPU 및 3 개의 제어보드로 구성되며 이들은 VME 버스를 이용하여 데이터를 전송한다. 로봇의 관리제어시스템은 그래픽워크스테이션을 이용하여 구성하였으며 로봇의 작업상황을 실시간으로 애니메이션하여 작업자에게 원격현장감을 제공하고 작업효율의 향상시켰다.