• Economic and Environmental Geology
• /
• v.42 no.4
• /
• pp.357-366
• /
• 2009

Since weathering weakens the rock fabric and exaggerates any structural weakness, it affects mechanical properties as well as physical and chemical properties of rock. Weathering leads to a decrease in density, strength, friction angle and cohesion, and subsequently it affects negatively on the stability of rock slope. The purpose of the study is to investigate the changes of the rock slope stability caused by discontinuities which have different weathering grades. For that, the discontinuity samples which are divided into two different weathering grades are obtained from the field and tested their mechanical properties such as JCS, JRC and residual friction angle. In order to evaluate the effects on the stability of slope due to weathering, the deterministic analysis is carried out. That is, the factors of safety for planar failure are calculated for rock masses which have two different weathering grades, such as fresh and weathered rock mass. However, since the JRC and friction angle values are widely scattered and the deterministic analysis cannot consider the variation, the factors of safety cannot represent properly the stability of the rock slope. Therefore, the probabilistic analysis has been used to consider the scattered values. In the deterministic analysis, the factors of safety for the fresh discontinuity and weathered discontinuity are 1.25 and 1.0, respectively. The results indicate the fresh discontinuities are stable for planar failure and the weathered discontinuities are marginally stable. However, the probabilities of failure for the fresh discontinuity and weathered discontinuity are 25.6% and 45.9%, respectively. This shows that both discontinuities are analyzed as unstable in the probabilistic analysis.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.15-21
• /
• 2005

Korean ginseng(Panax ginseng C.A. Meyer) is very difficult to obtain stable production of qualified ginseng roots because of variable stresses in soil environments. In transformation of ginseng with betain aldehyde dehydrogenase gene, compounds synthesized for controlling osmotic pressure such as proline, glycine, betaine, polyols and sugar were accumulated in cell for salt resistance in transgenic plants. 2 Agrobactgerium conjugants were acquired with bet A and bet B genes for solt resistant plants. A. tumefaciens MP90/pBetA and A. tumefaciens MP90/pBetB were recombined for increasing the tolerance to salt stress. To confirm the transformation of the binary vector, tobacco plant was transformed, and the transformant can grow on media containing high concentration of kanamycin. To identify NPT 11, BetA and BetB genes of the transformants, the band on the agarose was confirmed by PCR and RT-PCR techniques. The transformants of ginseng with bet A and bet B genes were acquired on the phytohormone free basic MS media containing only antibiotics and 1M mannitol used for selection of transgenic plant, but the transfomation efficiency for BetA and BetB was very low.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.80-83
• /
• 2008

A new pink gerbera (Gerbera hybrida Hort.) cultivar 'Summer Ring' was developed from a cross between 'Grandeur' and 'Nova Zembla' followed by seedling and line selections at the Flower Breeding Research Institute, Gyeongnam Agricultural Research and Extension Services (ARES) in 2005. Characteristics of the new cultivar were evaluated three times from 2003 to 2004. 'Summer Ring' has semi-double type mini flower in good harmony with pink (RHS, 56-D) ray floret and green center. It has good stable flower shape and strong peduncle, and its vase life was 14.7 days. The average yield of 'Summer Ring' flower was 69 per plant/year in greenhouse yield trails during 2003 and 2004. This cultivar was registered for commercialization in 2005. Commercial production of 'Summer Ring' could be possible throughout the country under greenhouse condition.

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.189-197
• /
• 2019

HLW (High Level Radioactive Waste) is one of the problems that must be solved in the countries that implement nuclear power generation. Most countries that are concerned about HLW treatment are considering complete isolation from human society by disposing them deep underground. For perfect isolation, understanding the characteristics of underground rocks is very important. In particular, understanding the characteristics of discontinuity as a path way is one of the first things in order to predict the movement of exposed nuclear species to the surface. In this study, we used 500m underground core samples obtained from granite and gneiss area. The purpose of this study is to understand the characteristics of the discontinuities in each rock type and to analyze the properties of the joints in the underground relative to the surrounding environment. For this purpose, the types of discontinuities were classified and the distribution of each discontinuity were analyzed through visual analysis of the each sample obtained at 500m underground. This study can be used as a basic data for understanding the properties of discontinuities in the rock of the survey area and it can be also used as an important data for understanding the distribution characteristics of discontinuities according to the rock types.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.117-126
• /
• 2021

Satellite magnetic observations reflect the magnetic properties of deep crust about the depth of Curie isotherm that is a boundary where the magnetic nature of the rocks is disappeared, showing long wavelength anomalies that are not easily detected in near-surface data from airborne and shipborne surveys. For this reason, they are important not only in the analyses on such as plate reconstruction of tectonic boundaries and deep crustal structures, but in the studies of geothermal distribution in Antarctic and Greenland crust, related to global warming issue. It is a conventional method to compute the spherical harmonic coefficients from global coverage of satellite magnetic observations but it should be noted that inclusion of erroneous data from the equator and the poles where magnetic observations are highly disturbed might mislead the global model of the coefficients. Otherwise, the reduced anomaly model can be obtained with less corruption by choosing the area of interest with proper data processing to the area. In this study, I produced a satellite crustal magnetic anomaly map over East Asia (20° ~ 55°N, 108° ~ 150°E) centered on Korean Peninsula, from CHAMP satellite magnetic measurements about mean altitude of 280 km during the last year of the mission, and compared with the one from global crustal magnetic model (MF7). Also, a comparison was made with long wavelength anomalies from EMAG2 model compiled from all near-surface data over the globe.

• Economic and Environmental Geology
• /
• v.56 no.4
• /
• pp.385-396
• /
• 2023

The Mesozoic Bansong Group, distributed along the NE-SW thrust fault zone of the Okcheon Fold Belt in the Danyang-Yeongwol-Jeongseon areas, contains important information on the two Mosozoic orogenic cycles in the Koran Peninsula, the Permian-Triassic Songrim Orogeny and the Jurassic Daebo Orogeny. This study aims to review previous studies on the stratigraphy, depositional period, and basin evolution of the Bansong Group and to suggest future research directions. The perspective on the implication of the Bansong Group in the context of the tectonic evolution of the Korean Peninsula is largely divided into two points of view. The traditional view assumes that it was deposited as a product of the post-collisional Songrim Orogeny and then subsequently deformed by the Daebo Orogeny. This interpretation is based on the stratigraphic, paleontologic, and structural geologic research carried out in the Danyang Coalfield area. On the other hand, recent research regards the Bansong Group as a product of syn-orogenic sedimentation during the Daebo Orogeny. This alternative view is based on the zircon U-Pb ages of pyroclastic rocks distributed in the Yeongwol area and their structural position. However, both models cannot comprehensively explain the paleontological and geochronological data derived from Bansong Group sediments. This suggests the need for a new basin evolution model integrated from multidisciplinary data obtained through sedimentology, structural geology, geochronology, petrology, and geochemistry studies.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.831-846
• /
• 2023

The Jucheon-Pyeongchang area in the northwestern Taebaeksan Zone of the Okcheon fold-thrust belt preserved several thrust faults placing the Precambrian basement granite gneisses of the Gyeonggi Massif on top of the Early Paleozoic Joseon Supergroup and the age-unknown Bangrim Group. Especially, the thrust faults in the study area show the closed-loop patterns on the map view, showing older allochthonous strata surrounded by younger autochthonous or para-autochthonous strata. These basement-involved thrusts including Klippes will provide important information on the hinterland portion of the fold-thrust belt. For defining Klippe geometry in the thrust fault terrains of the Jucheon-Pyeongchang area by older on younger relationship, the stratigraphic position of the age-unknown Bangrim Group should be determined. The Middle Cambrian maximum depositional age by the detrital zircon SHRIMP U-Pb method from this study, together with field relations and previous research results suggest that the Bangrim Group overlies the Precambrian basement rocks by nonconformity and underlies the Cambrian Yangdeok Group (Jangsan and Myobong formations). The structural geometric interpretation of the Pyeongchang area based on newly defined stratigraphy indicates that the Wungyori and Barngrim thrusts are the same folded thrust, and can be interpreted as a Klippe, having Precambrian hanging wall granite gneisses surrounded by younger Cambrian strata of the Joseon Supergroup and the Bangrim Group. Further detailed structural studies on the Jucheon-Pyeongchang area can give crucial insights into the basement-involved deformation during the structural evolution of the Okcheon Belt.

• Sim-seong Yeon-gu
• /
• v.36 no.1
• /
• pp.1-54
• /
• 2021

Princess Bari, the seventh daughter of the King and Queen, is abandoned at birth. She one day embarks on a solitary journey into the underworld to seek the antidote she needs to save her ailing father. The shamanic myth then depicts terrible ordeals, after which the Princess manages to obtain the elixir of life to bring her parents back to life, leading to her deification as the Queen of all shamans. The life of Princess Bari as the ancestor of shamans incorporates the necessary rite of passage to become a shaman, persevering through all manner of trials and tribulations until death and then being reborn. Princess Bari's story of deification as the goddess of shamans constitutes the archetype or the primitive image of the collective unconscious, the mytheme. From the perspective of analytical psychology, Princess Bari, who became the Queen of shamans after undergoing a process of pain, death, and then rebirth demonstrates a facet of the individuation process, evident in heroic mythology. Princess Bari not only cured her parents of disease but also brought them back to life. What enabled her to obtain the elixir to resurrect her parents was her love and compassion for them based on self-sacrifice, enduring all the trivial and repetitive undertakings of everyday life. She viewed the world and behaved from the perspective of a broader Self. Making herself a powerful healer through the ordeals in the underworld, Princess Bari is the psychopomp as well as the healer archetype. The sacred power of healing that goes beyond the Princess' sufferings represents the Self Archetype inherent in the mentality of the Koreans, in other words, a symbolic power that indicates the divine representation of a healer.

• Geophysics and Geophysical Exploration
• /
• v.27 no.2
• /
• pp.119-128
• /
• 2024

Marine magnetic surveys provide a rapid and cost-effective method for pioneer geophysical survey for many purposes. Sea-surface magnetometers offer high accuracy but are limited to measuring the scalar total magnetic field and require dedicated cruise missions. Shipboard three-component magnetometers, on the other hand, can collect vector three components and applicable to any cruise missions. However, correcting for the ship's magnetic field, particularly viscous magnetization, still remains a challenge. This study proposes a new additional correction method for ship's viscous magnetization effect in vector data acquired by shipboard three-component magnetometer. This method utilizes magnetic data collected simultaneously with a sea-surface magnetometer providing total magnetic field measurements. Our method significantly reduces deviations between the two datasets, resulting in corrected vector anomalies with errors as low as 7-25 nT. These tiny errors are possibly caused by the vector magnetic anomaly and its related viscous magnetization. This method is expected to significantly improve the accuracy of shipborne magnetic surveys by providing corrected vector components. This will enhance magnetic interpretations and might be useful for understanding plate tectonics, geological structures, hydrothermal deposits, and more.

• Economic and Environmental Geology
• /
• v.57 no.3
• /
• pp.281-292
• /
• 2024

North Korea relies heavily on coal as the primary energy source, playing an important role in all energy demand sectors except for the transportation sector. Approximately half of the total electricity is generated through coal-fired power plants, and coal is used to produce heat and power for all industrial facilities. Furthermore, coal has been a significant contributor to earning foreign currency through long-term exports to China. Nevertheless, since the 1980s, indiscriminate mining activities have led to rapid depletion of coal production in most coal mines. Aging mine facilities, lack of investment in new equipment, shortages of fuel and electricity, difficulties in material supply, and frequent damage from flooding have collectively contributed to a noticeable decline in coal production since the late 1980s. North Korea's coal deposits are distributed in various geological formations from the Proterozoic to the Cenozoic, but the most critical coal-bearing formations are Ripsok and Sadong formations distributed in the Pyeongnam Basin of the Late Paleozoic from Carboniferous to Permian, which are called as Pyeongnam North and South Coal Fields. Over 90% of North Korea's coal is produced in these coal fields. The classification of coal in North Korea differs from the international classification based on coalification (peat, lignite, sub-bituminous coal, bituminous coal, and anthracite). North Korean classification based on industrial aspect is classified into bituminous coal, anthracite, and low-grade coal (Chomuyeontan). Based on the energy factor, it is classified into high-calorie coal, medium calorie coal, and low-calorie coal. In North Korea, the term "Chomuyeontan" refers to a type of coal that is not classified globally and is unique to North Korea. It is a low-grade coal exclusively used in North Korea and is not found or used in any other country worldwide. This article compares North Korea's coal classification and the international coal classification of coal and provides insights into the geological characteristics, reserves, utilization, and research trends of North Korean coal resources. This study could serve as a guide for preparing scientific and industrial agendas related to coal collaboration between North Korea and South Korea.