• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.259-263
• /
• 2005

The aim of the present study is to evaluate relationship between UV-induced MED and perfusion value assessed by Laser Doppler Perfusion Imager. In this study, A increasing linear relationship is seen between perfusion and dose (p<0.05). The dose-response curve show a steep slope in the case of lower MED values group after MED point, For higher MED group, increase with a gentle slope.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.195-205
• /
• 2021

Purpose: The ultraviolet reflectance and transmittance of coastal building materials are one of the important factors of ultraviolet radiation in and out of coastal building. In this research, the ultraviolet spectral reflectance of many kinds of building materials was measured. Also, the relationships with the lightness, roughness, and chromaticity, which are surface characteristics, were reviewed and suggested. Method: In this study, according to the CIE classification, the ultraviolet region was defined as short-wavelength region UV-C(10nm~280nm), medium-wavelength region UV-B (280-315 nm), and long-wavelength region UV-A (315-400nm), and the visible light region was defined as (400nm~780nm). Spectrophotometer was used to continuously measure the reflectance from the ultraviolet region to the visible light region. Results: From the measurement results, the ultraviolet reflectance on Wood was shown to be about Visible 55-68%, UV-A^* 7-12%, and UV-B 4-5%. Wall tiles are about Visible18-40%, UV-A^* 8-20%, and UV-B^* 7-8%. That on concrete was shown to be about Visible 37%, UV-A^* 28%, and UV-B^*19%. Conclusion: The ultraviolet reflectance can be estimated by visible reflectance. Also, it is important to select a variety of materials according to the application when blocking UV.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.235-241
• /
• 2003

The effect of ultraviolet (UV) radiation on the characteristics of algae-derived dissolved organic matter (DOM) was examined by comparing the biodegradability and DOM fraction distribution of algal DOM before and after UV exposure. Algal DOM from two axenic cultures of Microcystis aeruginosa and Oscillatoria agardhii were irradiated for 24 h at a UV intensity of 42 W/$m^2$. A complete degradation of algal DOM during the UV exposure did not occur, remaining at constant concentrations of dissolved organic carbon(DOC). After UV exposure, however, microbial degradations were reduced by 17% in M. aeruginosa and 53% in O. agardhii, respectively, and decomposition rates also were two times lower in UV exposed algal DOM. In addition, the chemical compositions of algal DOM altered substantially after UV radiation exposure. The proportions of hydrophilic bases (HiB; protein-like DOM) decreased considerably in both algal DOM sources after UV exposure (16.8% and 20.0% of DOM, respectively), whereas those of hydrophilic acids (HiA; carboxylic acids-like DOM) increased as much as the decrease of the HiB fraction. Capillary ion electrophoresis (CE) analysis showed that several carboxylic acids increased significantly after UV exposure, further confirming an increase in HiA fractions. The results of this study clearly indicate that algal DOM can be changed in its chemical composition as well as biodegradability without complete degradation by UV radiation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.148-152
• /
• 2013

An ultraviolet (UV) sterilization system was developed to decrease the number of microorganisms in filtered Acer mono sap (FAS). The Acer mono sap (AS) was passed through 18 strips of PTA fluoroplastic tubing with 30 UV lamps (total 1,170 W). During passage, the AS was effectively exposed to the UV rays. The total bacteria, coliform group and fungi were sterilized at a flow rate ranging from 852 to 1,358 mL/min and a UV power higher than 156 W. Although the sensory score of the UV-sterilized AS was significantly lower than that of the untreated AS, the sensory score was better under the condition of 390 W and 852~1,358 mL/min than under the other conditions examined. ANOVA did not reveal a significant difference in pH, total acidity, sugar content and color characteristic under all conditions tested (p<0.05). Considering the overall attributes of the AS quality, the optimum sterilization condition was determined to be 390 W and 852~1,358 mL/min.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.147-152
• /
• 2014

RUVIS(Reflective Ultraviolet Imaging System) is an effective equipment that detects the location of latent fingerprint at crime scene using short wavelength ultraviolet of 254 nm. In this study, the degree of DNA damage in biological samples was compared depending on the distance and time of processing using four commonly used RUVIS. 50% of DNA was damaged by treating 10 seconds at 10 cm distance in 3 types of RUVIS such as Police RUVIS, SIRCHIE mini light and SIRCHIE RUVIS. In addition, the degree of DNA damage was increased as the distance was closer and the treatment time was longer. It showed that short wavelength UV could cause DNA damage when used close to the samples at crime scene. Therefore, it was suggested to use RUVIS at a distance of at least 1 m. The degree of DNA damage was not significant by Polilight which used long wavelength ultraviolet of 350 nm. As a result, the choice and usage of which UV light and RUVIS were critical for detection of fingerprint and successful DNA typing.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.123-131
• /
• 2019

In this study, the development of transparent UV blocking material using $TiO_{2-x}$ oxide thin film process was developed. A process technology is related to a process technology for making a sample with ultraviolet-shielding property of visible light transmittance of 78 % or more (total light transmittance at 550 nm) and of a UV cut-off characteristic of more than 95 % at 315 nm in ultraviolet wavelength band. In this study, it is possible to establish a flexible device process condition of high performance ultraviolet (UV) shielding thin film, to design mixed type of transparent flexible device with heterogeneous characteristics and to formulate composite deposition technology, according to various market demands. Establishment of actual roll-to-roll continuous process and equipment and process technology will affect related industries greatly.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4B
• /
• pp.441-447
• /
• 2008

Volatile organic compounds (VOCs) emitted from various industrial sources commonly consist of biodegradable chemicals and recalcitrant compounds. Therefore, it is not effective to employ a single method to treat such mixtures. In this study, a novel hybrid system coupled with a ultraviolet (UV) photolysis reactor and a biofilter in a series was developed and evaluated using toluene and TCE as model VOCs. When only TCE was applied to the UV reactor, greater than 99% of TCE was degraded and the concentration of soluble byproducts from photo-oxidation reaction increased significantly. However, the toluene and TCE mixture was not effectively degraded by the UV photo-oxidation standalone process. The hybrid system showed high toluene removal efficiencies, and TCE degradation at a low toluene/TCE ratio was improved by UV pretreatment. These findings indicated that the UV photo-oxidation were effective for TCE degradation when the concentration of toluene in the mixture was relatively low. A restively high toluene content in the mixture resulted in an inhibition of TCE degradation. Thus, chemical interactions in both photo-oxidation and biodegradation need to be carefully considered to enhance overall performance of the hybrid system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.17-23
• /
• 2009

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. The CFD model was also used to evaluate disinfection efficiency in alternative reactor designs. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. In this paper, it describe the how to design optimal ultraviolet disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.237-254
• /
• 2019

This study is focused on the effect of sodium stearate, which is a hydrophilic gelling agent affecting on the hardness of O/W solid sunscreen cosmetic. The sunscreen of the O/W (oil in water) type is stable, good in use, and relatively easier to stabilize than the sunscreen of the W/O (water in oil) type. Methods for increasing the stability by using emulsifiers, electrolytes, and wax or oil have been studied for solid sunscreen. This study was intended to develop a solid sunscreen stabilized by increasing the hardness using sodium stearate as an O/W type containing more than 40% moisture. Response surface methodology (RSM) was used to analyze the factors affecting the hardness of cosmetics, and sodium stearate, polyol and oil were used for each factor. The hardness and the reaction value was measured using a rheometer. As a result, sodium stearate showed a meaningful value (p < 0.05) among the three factors affecting hardness. In addition, the use of sodium stearate as a hydrophilic gelling agent increased the usability and stability of the solid sunscreen.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.389-399
• /
• 2002

Poly (ethylene terephthalate) (PET) fibers were modified by deep UV irradiation which was produced by a low pressure mercury lamp. FT-IR and XPS analyses were used to elucidate the surface chemical composition of PET fibers treated with UV. Relative $O_{1s}$ intensity increased considerably and it was found that oxygen was incorporated in the form of COO on the fiber surface. FT-IR and XPS analyses proved the existence of carboxylic groups on the surfaces and the adsorption test of cationic compound further supported these results. The concentration of carboxylic acid group on the surface increased remarkably with Increasing irradiation time. XPS analysis and adsorption experiments proved that the surface structure of the UV-irradiated PET fibers were stable for 12 months. Antibacterial property and the deodorization rate of UV-irradiated PET fibers adsorbed with the berberine compound were investigated. Reduction rates of bacteria increased by about 21 to 99% compared to unradiated PET fiber. Deodorization rates of 23% for unradiated PET fiber increased to about 75% for 30 min irradiated samples.s.