• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.1
• /
• pp.101-106
• /
• 2016

In this paper, we analysed correlation between scores and posture of amateur archer with inertial sensor based motion analysis system. Four 13 to 15 yeared subjects are participated and accelerations of upper and forearms are measured during shooting. Each subject carried out six end. And they shoot arrows six times per each end from 30 meters away. We extracted and analyzed acceleration values during full throw. In the case of left arm, we could not found any meaningful correlation with score. Meanwhile, acceleration values of right arm have certain correlation with score. It seems that aiming skill of right arm is very important while left arm settles stably.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.29-37
• /
• 2003

An approach is described for automatic measuring of GCP's image coordinates from SPOT imagery and focused on the fulfillment an automatic orientation of satellite images. For the orientation of a stereopair of digital images, firstly, GCP(Ground Control Point) should be selected and then the work for measuring of image coordinates correspond to GCPs is required. In this study, we propose the method for extracting the GCP's image coordinates automatically using an image patch for control points and auxiliary points matching. For the evaluation of measurement accuracy, a comparison between points those are extracted manually and automatically by a proposed method have made. Finally, we shows the feasibility of automatic image coordinates measurment by applying in stereo modeling for SPOT images.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.47-53
• /
• 2006

In this contribution, an integration of seamless navigation system for the pedestrian is introduced. To overcome the GPS outages in various situations, multi-sensor of GPS, INS, electronic barometer and compass are considered in one Extented Kalman filter. Especially, the integrated system is designed for low-cost for the practical applications. Therefore, a MEMS IMU is considered, and the low quality of the heading is compensated by the electronic compass. In addition, only the pseudoranges from GPS measurements are considered for possible real-time application so that the degraded height is also controlled by a barometer. The mathematical models for each sensor with systematic errors such as biases, scale factors are described in detail and the results are presented in terms of a covariance analysis as well as the position and attitude errors compared to the high-grade GPS/INS combined solutions. The real application scenario of GPS outage is also investigated to assess the feasible accuracy with respect to the outage period. The description on the current status of the development and future research directions are also stated.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.89-97
• /
• 2002

We have developed the 45-Van system in order to maximize the interoperability of spatial data in 45(GNSS, SIIS, GIS, ITS) by sharing and providing spatial data of remote site. The 4S-Van system enables to acquisition and production of information for GIS database and the accurate position information by combining and connecting GPS/IMU, laser, CCD(charged-coupled device) image, and wireless telecommunication technology. That is, 4S-Van system measures its position and attitude using integrated GPS/IMU and takes two photographs of the front scene by two CCD cameras, analyzes position of objects by space intersection method, and constructs database that has compatibility with existing vector database system. Furthermore, infrared camera and wireless communication technique can be applied to the 4S-Van for a variety of applications. In this paper, we discuss the design and functions of 4S-Van that is equipped with GPS, CCD camera, and IMU.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.132-140
• /
• 2002

By utilizing OSMI (Ocean Scanning Multi-spectral Imager) onboard KOMPSAT-1, the moon can be imaged. Because the moon has no atmosphere and reflects sun lights at a constant rate, it can be the radiance source for calibration of OSMI. But there are a lot of risks which made KOMPSAT-1 enter into safe-hold mode. So planning the imaging of the moon with OSMI should be determined seriously with consideration to information on KOMPSAT-1 operation, the moon, the sun, etc. But it takes a long time for determining the imaging time of the moon using MCE(Mission Control Element) simulator and there are operational problems to be solved. In this paper, fast simulator for determining imaging time for the moon with OSMI has been developed. The proper timeline for imaging the moon and the position of the moon image in OSMI image coordinates and the phase of the moon are determined. STK was used for acquiring information on KOMPSAT-1, the moon, the sun and the characteristitcs of OSMI are considered. As a result, we can determine imaging time of the moon with OSMI much faster and efficiently.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.137-148
• /
• 2014

A multi-rotor is an autonomous flying robot with multiple rotors. Depending on the number of the rotors, multi-rotors are categorized as tri-, quad-, hexa-, and octo-rotor. Given their rapid maneuverability and vertical take-off and landing capabilities, multi-rotors can be used in various applications such as surveillance and reconnaissance in hostile urban areas surrounded by high-rise buildings. In this paper, the unified dynamic model of each tri-, quad-, hexa-, and octo-rotor are presented. Then, based on derived mathematical equations, the operation and control techniques of each multi-rotor are derived and analyzed. For verifying and validating the proposed models, operation and control technique simulations are carried out.

• Korean Journal of Remote Sensing
• /
• v.19 no.4
• /
• pp.291-305
• /
• 2003

The cost of deploying Geological and Environmental information gathering systems, especially when such systems obtain remote sensing and photographic data through the use of commercial satellites and aircraft. Besides the high cost equipment required, adverse weather conditions can further restrict a researcher's ability to collect data anywhere and anytime. To mitigate this problem, we have developed a compact, multi-spectral automatic Aerial photographic system. This system's Multi-spectral camera is capable of the visible (RGB) and infrared (NIR) bands (3032*2008 pixel). It consists of a thermal infrared camera and automatic balance control, and can be managed by a palm-top computer. Other features includes a camera gimbal system, GPS receiver, weather sensor among others. We have evaluated the efficiency of this system in several field tests at the following locations: Kyongsang-bukdo beach, Nakdong river (at each site of mulkeum-namji and koryung-gumi), and Kyungahn River. Its tested ability in aerial photography, weather data, as well as GPS data acquisition demonstrates its flexibility as a tool for environmental data monitoring.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.133-140
• /
• 2008

In this paper, we analyzed the accuracy of orbit modeling with various control point configurations and adjustment unknown parameter sets. We used 152 GCP points acquired from GPS surveying, which were distributed from Choon-chun to Nha-ju along 420km in distance. For orbit modeling, seven adjustment parameter sets were chosen to include parameters for satellite position, velocity and attitude angles at different degree of freedom. Firstly we determined the location of model point in seven configurations. Secondly we estimated model parameters for each parameter set and for each GCP configurations. Finally we applied the model to reference check points and analyzed its accuracy. We were able to find the unknown parameter set that produce best orbit modeling performance regardless of the configuration of model points.

• KSCI Review
• /
• v.14 no.1
• /
• pp.241-248
• /
• 2006

The recognition of a relatively big and rarely movable object. such as refrigerator and air conditioner, etc. is necessary because these objects can be crucial global stable features of Simultaneous Localization and Map building(SLAM) in the indoor environment. In this paper. we propose a novel method to recognize these big objects using a sequence of 3D scenes. The particles representing an object to be recognized are scattered to the environment and then the probability of each particles is calculated by the matching test with 3D lines of the environment. Based on the probability and degree of convergence of particles, we can recognize the object in the environment and the pose of object is also estimated. The experimental results show the feasibility of incremental object recognition based on particle filtering and the application to SLAM

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.77-86
• /
• 2006

Aplications of the real-time kinematic GPS surveying and inertial measurement unit have been beingRTK GPS allows the use of a static base station and remote rover unit to allow for data collectionwithin several seconds and in real time. It is useful for monitoring the behaviors of massive structureslike bridges. And this study purposed to implement a method of deciding the acurate dynaimc attitudeof structures by IMU. In this study, among GPS methods, we used RTK GPS to analyze the precisionof monitoring and then on the basis of it, we developed a monitoring system using RTK GPS anda deviation betwen observation values, X axis was 1mm, Y axis was 1mm and Z axis 2.2mm. I tturned out that it was possible to monitor and measure structures by RTK GPS and IMU.