• The korean journal of orthodontics
• /
• v.35 no.5 s.112
• /
• pp.341-350
• /
• 2005

The Purpose of this study was to compare the degree of vortical head rotation and to evaluate the reproducibility of natural Head posture (NHP) according to two guiding methods, the head posture aligner (HPA) method and the solf balance posture (SBP) method. The subjects consisted of 30 adults. On the first day. lateral and frontal cephalometric radiographs were obtained through the two guiding methods. One mouth later. lateral and frontal cephalometric radiographs were obtained again through both guiding methods. The degrees of vertical head rotation of both guiding methods were compared and the reproducibility was evaluated for each guiding method. A comparison of the degrees of vortical head rotation for the two methods revealed that the vertical head posture was lower in the SBP method than in the HPA method by an average of $2.79^{\circ}$. All measurements obtained using the HPA and SBP methods with a time interval of one north did not show any significant difierence in lateral and frortal cephalometric radiographs. The results of the present study suggest that the SBP method may be used as an alternative to the HPA method in case the HPA method can not be applied.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.155-164
• /
• 2003

현재 국내에서는 교통사고 재현 방법이 노면 흔적물에 의존하여 이루어지고 있고, 노면 흔적물이 없는 경우 교통사고 재현은 불가능하게 된다. 이러한 단점을 보완하기 위해 외국에서는 충돌모델을 이용한 교통사고 재현프로그램을 활용하고 있는 추세이다. 현재 우리나라에서 가장 많이 사용하는 교통사고 재현 프로그램 PC-CRASH를 활용하기 위해서는 각 사고마다 알맞은 충돌특성 인자 값을 사용자가 직접 입력하여 사용하여야 하나, 이를 활용할 수 있는 활용자료가 부족한 실정이다. 본 연구는 국내에서 실제 발생된 교통사고 사례에 대해 교통사고 재현 프로그램인 PC-CRASH와 충돌에 영향을 미치는 충돌 인자들로 교통사고를 재현하였고, 차량의 최종위치간 거리와 자세에 어떠한 영향을 미치는가를 알아보았다. 또한 실제 역 해석을 하기 위해 차량의 최종위치와 자세만으로 각각의 사례에 적절한 인자값을 추정할 수 있는 회귀식을 구성하였고, 통계적으로 신뢰성을 검증하였다. 사고 재현에 필요한 주요 충돌인자들의 초기치 설정시 추정식을 이용할 경우, 사고 재현 프로그램 활용 시, 시간 단축 효과를 프로그램 내부에 있는 유전자 알고리즘의 반복횟수로 추정식의 통계적 검증을 하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.211-212
• /
• 2013

방사선 치료를 받는 모든 환자의 경우 먼저 모의 치료를 시행한 후에 동일한 자세로 방사선 치료를 실시한다. 이 때 무엇보다도 중요한 사항은 정확한 자세의 재현성이다. 직장암 환자의 방사선 치료를 시행하는 경우에도 모의 치료와 동일한 자세 유지가 요구되어진다. 하지만 호흡 및 환자의 여러 가지 요소에 의해 자세의 오차가 발생할 수 있다. 이에 본 논문은 직장암 환자의 방사선 치료를 시행하는 경우 오차가 발생할 수 있는 요소 중에 환자의 체지량 지수 차이에 의한 자세 재현성에 대해 알아보고 향후 자세 오차를 줄일 수 있는 방법을 모색하고자 한다.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.307-315
• /
• 2000

This study was performed to evaluate the reproducibility of natural head position according to skeletal malocclusion types and sex using cephalometric radiographs for establishing orthodontic diagnosis and treatment planning. The sample consisted of 90 young adults (male 45, female 45) who had the skeletal malocclusion. Cephalometric radiographs were taken in natural head position, and statistical analysis was performed and method error of 6 postural variables were estimated to evaluate the reproducibility of the natural head position. The following results were obtained : 1. In the reproducibility of the natural head position, postural variables had no statistical significance In male and female (P>0.05). 2. In the reproducibility of the natural head position, postural variables had no statistical significance in Class I, II, III, and total group (P>0.05). 3. The reproducibility of natural head position using method error was excellent in all groups.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.115-122
• /
• 2023

The hip joint device is an important immobilization device for internal rotation in the diagnosis of bone density test, microfracture, and arthritis. These fixing mechanisms have limitations in maintaining reproducibility due to the use of Velcro. In this study, we developed an improved hip joint device and evaluated its usefulness. For 30 students enrolled in the Department of Radiology, we evaluated the reproducibility through medical imaging and the time required for positioning by applying the conventionaling and improved device. Changes over time were also evaluated. As a result, compared to the conventional device, the improved device showed a 32% reduction in positioning time and improved reproducibility by about 6.2 times. As for the amount of change over time, the positioning time increased in the conventional device, but decreased in the improved device, and the reproducibility of the conventional device was lower than that of the improved device. Through this, it can be said that the use of the improved device improved the image quality and reduced the radiologist's workload.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.85-88
• /
• 2002

I. 목적 : arm-up holder는 흉부 및 복부 질환 치료의 환자고정에 유용하게 사용하고 있으나 손잡이 부분과 어깨가 닿는 부분까지 거리 때문에 동일한 자세를 유지하는데 불편함이 있다. 특히 긴장을 많이 하거나 기력이 없는 환자는 방사선 치료 시 자세의 불안정으로 인하여 치료의 정확성이 떨어질 수 있다. 이에 본원에서는 현재 사용하고 있는 arm-up holder에 팔의 지지를 위한 보조기구를 제작하여 유용성을 평가하였다. II. 대상 및 방법 : 기존의 arm-up holder에 어깨받침대를 부착하여 개선된 arm-up holder를 제작하였다. 실험을 위하여 기존의 arm-up holder를 사용하는 환자그룹과 개선된 arm-up holder를 사용하는 그룹으로 구분하여 자세 변화를 평가하였다. 두 그룹의 환자를 대상으로 모의 치료를 실시한 후 치료실에서 L-gram 을 2회 씩 촬영하여 치료하고자 하는 portal film과 isocenter의 변화를 측정했다. 각 그룹 당 10명씩의 환자를 선정하여 반복 조사하였다. III. 결과 : 개선된 arm-up holder를 사용한 그룹의 isocenter 의 변화는 최대 2mm, 최소 0.5mm 평균 1.2mm 이다. 기존의 arm-up folder를 사용한 그룹과 비교하여 평균변화는 약 2배로 나라났고, 최대 변화는 2.5배의 오차범위가 측정되었다. IV. 결론 : 현재 사용하고 있는 arm-up holder는 흉부 및 복부의 사방향 방사선 치료 시 팔에 의한 방사선 감약을 예방할 수 있는 유용한 고정용구이다. 하지만 팔을 올리고 있는 자세는 환자에게 불편함을 야기 시키며 이로 인한 치료의 정확성을 감소시킬 수 있다. 따라서, 기존의 arm-up holder에 보조기구를 제작하여 사용함으로써 환자의 불편함을 개선하고, set-up 의 안정성과 재현성을 향상시킬 수 있었다.

• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.100-106
• /
• 2003

Purpose : To develop a patients' setup verification tool (PSVT) to verify the alignment of the machine and the target isocenters, and the reproduclbility of patients' setup for three dimensional conformal radiotherapy (3DCRT) and intensity modulated radiotherapy (IMRT). The utilization of this system is evaluated through phantom and patient case studies. Materials and methods : We developed and clinically tested a new method for patients' setup verification, using digitally reconstructed radiography (DRR), simulation, porial and digital images. The PSVT system was networked to a Pentium PC for the transmission of the acquired images to the PC for analysis. To verify the alignment of the machine and target isocenters, orthogonal pairs of simulation images were used as verification images. Errors in the isocenter alignment were measured by comparing the verification images with DRR of CT Images. Orthogonal films were taken of all the patients once a week. These verification films were compared with the DRR were used for the treatment setup. By performing this procedure every treatment, using humanoid phantom and patient cases, the errors of localization can be analyzed, with adjustments made from the translation. The reproducibility of the patients' setup was verified using portal and digital images. Results : The PSVT system was developed to verify the alignment of the machine and the target isocenters, and the reproducibility of the patients' setup for 3DCRT and IMRT. The results show that the localization errors are 0.8$\pm$0.2 mm (AP) and 1.0$\pm$0.3 mm (Lateral) in the cases relating to the brain and 1.1$\pm$0.5 mm (AP) and 1.0$\pm$0.6 mm (Lateral) in the cases relating to the pelvis. The reproducibility of the patients' setup was verified by visualization, using real-time image acquisition, leading to the practical utilization of our software Conclusions : A PSVT system was developed for the verification of the alignment between machine and the target isocenters, and the reproduclbility of the patients' setup in 3DCRT and IMRT. With adjustment of the completed GUI-based algorithm, and a good quality DRR image, our software may be used for clinical applications.

• The korean journal of orthodontics
• /
• v.40 no.2
• /
• pp.77-86
• /
• 2010

Objective: The purposes of this study were to evaluate the reproducibility and reliability of head posture obtained by registering outer canthus as a soft tissue landmark with the Outer Canthus Indicator (OCI). Methods: Twenty-one adults with normal facial morphology were enrolled in this study (mean age $27.5\;{\pm}\;1.72$ years). To register initial head posture, height of the outer canthus from the ear rod plane was measured using OCI. Head posture was reproduced by moving the head upwards and downwards until the outer canthus was in a straight line with the indicator set at a registered height. After the head posture is reproduced by two operators after two days, lateral photographs were taken. Computerized photometric analyses of the photographs were performed. Results: The head rotations around the transverse axis were $0.69\;{\pm}\;0.43^{\circ}$, $0.98\;{\pm}\;0.65^{\circ}$ from each of the two operators. Standard errors were $0.09^{\circ}$ and $0.14^{\circ}$ each, which were similar to results from past research findings. There were no significant differences between the data from the two operators (p > 0.05). There were no correlations between the head rotation around the horizontal and vertical axes (p > 0.05). Conclusions: The present study suggests that OCI-registered head posture may minimize errors from vertical head rotation in cephalometry and photometry.

• The Journal of Korean Society for Radiation Therapy
• /
• v.9 no.1
• /
• pp.46-49
• /
• 1997

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.61-65
• /
• 2003

I. Purpose Patient immobilization is essential factor for successful radiation therapy and major problem is reproducibility to maintain patient position during total radiation therapy period. Purpose of this study is evaluation for usefulness of the custom made immobilization device for the anteroperitoneal resection patients with rectal cancer II. Materials and Methods The object of this study were patients who underwent anteroperitoneal resection and undergo radiation therapy at present with rectal cancer. We made immobilization device for patient individually and analyzed its set up reproducibility, patient position deviation and errors. III. Results There was $5mm{\sim}10mm$ deviation in patient position without individual immobilization device, but we improved the deviation within few mm limitation with individual immobilization device. IV. Conclusion Custom made immobilization device was very helpful for anteroperitoneal resection patient with rectal cancer. We improved the patient position deviation within few mm limitation, shorten the set up time and we could give the comfort to patients.