• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.769-776
• /
• 2000

Visible spectral characteristics of cross-sectional emissions from a partially premixed methane/air and propane/air flames have been investigated. An optical train with a two-axis scanning mirror system was used to record line-of-sight emission spectra from 354nm to 618nm, and inversion technique was adapted to obtain cross-sectional emission spectra. By analyzing the reconstructed emission spectra, cross-sectional intensities of CH and $C_2$ radicals were separated from the background emissions. The blue flame edge and yellow flame edge were also obtained by image processing technique for edge detection with color photograph of flame. These edges were compared with radial distributions of CH, $C_2$ radicals and background emissions. The CH radicals were observed at blue flame edge. The background emissions were generated by soot precursor at upstream of flame and by soot at downstream of flame. The $C_2$ radicals in propane/air flame were observed more than those in methane/air flame.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.36.2-36.2
• /
• 2005

• Information Display
• /
• v.3 no.6
• /
• pp.3-7
• /
• 2002

차세대 디스플레이로 부각되는 FPD(Flat Display Panel) 가운데 Digital TV 및 산업용 Display로 각광 받고 있는 PDP(Plasma Display Panel)는 최근 LCD, Projection Display 등의 비약적인 기술발전으로 인한 치열한 경쟁 속에서도 지속적인 기술발전을 거듭하고 있다. PDP는 자발광 Display로서 CRT에 버금가는 밝기, 선명성, 넓은 시야각, 색재현력 등의 장점을 가지고 있으며 소비전력, 발광효율, 감성화질 등의 향상에 노력을 경주하고 있다. 본 소고에서는 이러한 PDP의 고화질 기술동향에 대해 알아보겠다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.240-241
• /
• 2003

경계면 근처에서의 에바네슨트파의 상호작용은 입사, 반사 및 굴절된 평면파의 삼중모드로 설명한다. 경계에서 굴절률이 낮은 영역에 위치한 DCM 색소분자에 의한 자발방출은 굴절률이 높은 영역에서 입사된 삼중모드와 굴절률이 낮은 영역에서 입사한 삼중모드와 상호작용을 하며, 광 측정기에서는 이 두 모드의 선형결합을 보게된다. 자발방출에 대한 실험결과는 이러한 이론을 뒷받침 해준다. (중략)

• Prospectives of Industrial Chemistry
• /
• v.23 no.6
• /
• pp.14-24
• /
• 2020

최근 우수한 발광 특성을 갖는 양자점을 고해상도 디스플레이의 발광 소재로 도입하고자 하는 노력이 활발하다. 양자점을 활용한 디스플레이의 실현을 위해서는 콜로이드 상태인 다색의 양자점을 고해상도로 패터닝하는 기술의 확립이 필요하다. 본 연구에서는 ethane-1,2-diyl bis(4-azido-2,3,5,6-tetrafluorobenzoate)를 양자점용 가교제로 활용하여 용액공정을 기반으로 형성된 양자점 박막을 고해상도로 패터닝한 기술을 소개하고자 한다. 위 양자점용 가교제의 양 말단에는 아지드 그룹을 포함한 작용기가 존재한다. 아지드 기는 자외선에 의해 광 활성화되어 양자점 표면의 알킬 리간드와 가교 결합을 형성함으로써, 양자점 박막에 화학적 내구성을 부여한다. 본 기술을 기반으로, 적색, 녹색, 청색의 카드뮴 기반 양자점을 고해상도로 패터닝하고 정밀하게 배열하여 인치 당 화소 수 1400 이상의 픽셀 형성에 성공하였다. 또한 가교 반응 후에도 성능 저하가 없는 양자점 박막 및 자발광 양자점 다이오드를 개발하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.259-264
• /
• 2005

Measurements of heat release are very important for controling combustion instabilities, which are closely connected with combustion instabilities. $OH^{\ast}$ images were acquired through a ICCD in this study, which were in use as indicating index of the reacting region, global and local heat release rate in the lean premixed combustion. The objectives of this study are to see the effect of equivalence ratio on global heat release rate and local Rayleigh index distribution. The local Rayleigh index distribution was acquired by information from central section of flame. This information was from the line-of-sight images which were inverted by the Abel de-convolution. In each condition, the mean value of heat release increased exponentially with equivalence for a periodic time. Local Rayleigh index distribution cleary showed the region of amplifying or damping the combustion instability as the equivalence ratio increased. This could provide an insight on the region of combustion instability and the structure of flames on the equivalence ratio.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1116-1121
• /
• 2004

In this study, the effect of central fuel injection on a coaxial laminar $CH_{4}/air$ flame was experimented at the defined premixing condition(${\Phi}=1.90$, ${\sigma}=50/75/100%$, x/D=10). The partial premixing parameter are the equivalence ratio that total fuel is fixed at 200cc/min, the fuel split degree which means the percentage of fuel entering the outer tube to the total amount, and the mixing distance indicating the nonreactant mixture's homogeneity between inner tube top and burner exit. The object is to investigate the flame structure and chemiluminescence characteristics of laminar partial premixed flame as changing mixing parameters. The radical signal was acquired from ICCD camera and PMT. Each intensity was compared with Abel inverted value for measuring the effect of background light on the peak signal location and the intensity at central preheat zone. The results show that the peak location of each radical was broaden as the fuel split degree increasing because the mixing quality was enhanced. and $OH^{\ast}$ is a good indicator for flame front between reaction and preheat zone. At last $CH_{2}^{\ast}$ has the same tendency with $CH^{\ast}$ but a thinner reaction zone than $CH^{\ast}$ due to a rapid decay on the burned gas side.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.437-444
• /
• 2005

Experiments were carried out in an atmospheric pressure, lab-scale gas turbine combustor to see the effect of partial premixing on unstable flame structure and Nox emission characteristics. The swirl angle is 45 deg., fuel-air mixing degrees were varied 0, 50 and 100% respectively at equivalence ratio ranging from 0.53 to 0.79. The evolution of phased-locked OH chemiluminescence images were acquired with an ICCD. NOx emission characteristics were also investigated at each experimental condition. The effect of the fuel-air mixing degree on the flame structure was obtained from phase-locked $OH^*$ images. And it was obtained from local heat release characteristics that the information about the region which the combustion instability was amplified or damped. It also could be confirmed that $\sigma$ has greatly influence on NOx emission characteristics at lean regimes. It would be expected that it could provide invaluable data for understanding the mechanism of combustion instability.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.47-53
• /
• 2013

In this study, In order to develop the measurement method of high energy density metal aluminum dust cloud combustion, flame temperature and emission spectrum was measured using spectrometer. Because of the ultra high ${\mu}m$-sized aluminum flame temperature more than 2400 K, it was measured by non-contact optical technique which is the modified two wavelength pyrometry with 520, 640 nm and spectrum comparison method. These methods were applied to experiment after accurate verification. As a result, we could identify that flame temperature is more than 2400 K in bottom of combustor in both methods. And on the emission spectrum analysis, we could measure AlO radical which is occurred dominantly in aluminum combustion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.11
• /
• pp.1368-1375
• /
• 2004

Measurements of OH chemiluminescence in an atmospheric pressure, laboratory-scale dump combustor at equivalence ratios ranging from 0.63 to 0.89 were reported. The signal from the first electronically excited state of OH to ground state was detected through a band-pass filter with an ICCD. The objectives of this study are two: One is to see the effects of equivalence ratio on global heat release rate and local Rayleigh index distribution. To get the local Rayleigh index distribution, the line-of-sight images were inverted by tomographic method, such as Abel do-convolution. Another aim is to investigate the validity of using OH chemiluminescence acquired with an ICCD as a qualitative measure of local heat release. For constant inlet velocity and temperature, the overall intensities of OH emission acquired at different equivalence ratio showed periodic and higher value at high equivalence ratio. OH intensity averaged over one period of pressure increased exponentially with equivalence ratio. Local Rayleigh index distribution clearly showed the region of amplifying or damping the combustion instability as equivalence ratio increased. It could provide an information/insights on active control such as secondary fuel injection. Finally, local heat release rate derived from reconstructed OH images were presented fur typical locations.