• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.113-119
• /
• 2002

Recently, an automatic crane control system is required with high speed and rapid transportation. During the operation of crane system in container yard it is necessary to control the crane trolley position and loop length so that the swing of the hanging container is minimized We can do development of unmanned automation control system using automation travel control technique and anti-sway technique in crane system. Therefore, we designed a controller for Automation travel control to control the transfer crane system. Analyzed crane system through simulation, and proved excellency of control performance than other conventional controllers.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.10a
• /
• pp.25-35
• /
• 1998

정부는 자동화컨테이너터미널을 구축하기 위한 기초연구를 수행하고 있다. 자동화컨테이너터미널은 선박하역을 담당하는 컨테이너 크레인과 애드크레인을 무인 혹은 유/무인 자동제어가 가능하도록 설계하고 선박과 야드간 이동은 AGV를 이용하여 자동화함으로써 생산성 향상, 인건비 절감 등을 목표로 하고 있다. 본 연구에서는 1척의 선박이 접안할 수 있는 가상의 자동화컨테이너터미널에서 컨테이너 크레인 수, AGV 대수, 야드 크레인수 등을 변화시켜가면서 터미널의 생산량을 추정할 수 있는 시뮬레이션 모델을 개발하여 제시하였다. 또한 향후 자동화컨테이너터미널의 최적 설계 및 운영을 위한 시뮬레이터를 개발하기 위한 구상을 제시하였다.

• Journal of the military operations research society of Korea
• /
• v.35 no.2
• /
• pp.63-76
• /
• 2009

The rapid development of IT and Science & Technology has greatly influenced the aspect of future warfare. Accordingly, the Army Forces require efficient logistics support, hence the importance of AS/RS has steadily increased. This research validated mathematical propriety of the management problem of S/R machine in AS/RS with mathematical analysis based on its travel time and simulation analysis using Automod. After all, we could improve the performance of S/R machine based on its dwell point and turn-over distribution.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.169-173
• /
• 2000

현재 컨테이너 터미널에서 사용되고 있는 하역 장비들은 크게 하역작업을 수행하는 크레인과 컨테이너를 운반하는 트레일러, 컨테이너의 하역상태를 파악하는 모니터링 시스템으로 구분할 수 있다. 각각의 장비들은 수동으로 동작되며, 모니터링 시스템에서는 컨테이너의 위치 및 수량 등을 파악한다. 이런 시스템 하에서는 모든 항만 하역 장비들을 사람이 일일이 수동으로 조작함으로써 많은 인력이 필요하다. 또한, 각 하역장비들의 상태를 평면적인 2차원 화면으로만 보여주므로써 모니터링 시스템에 대한 현실감이 떨어진다. 이와 같은 단점을 보완하기 위해 컨테이너를 자동으로 운반하는 AGV를 도입하고 트랜스퍼 크래인과 컨테이너 크레인의 일부분을 자동화하여 작업능률을 향상시키고, 여기에 3차원으로 표현된 VR 시스템을 도입하여 각 하역장비들에 대한 세세한 동작까지를 모니터링함으로써 사용자가 현장에 있는 것과 유사한 느낌을 가질 수 있도록 하였다. 본 논문에서는 이러한 3차원 VR시스템과 모형으로 만들어진 AGV와 컨테이너 크레인, 트랜스퍼 크레인간의 유기적인 데이터 송,수신 및 안정적인 통신을 위해 데이터 포맷에 대한 연구를 하였다. 이런 데이터 포맷의 결정은 손실 없는 통신을 보장하며 나아가 정확한 모니터링을 보장할 것이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.515-520
• /
• 2002

Automatic Transfer Crane is needed for automation of container terminal. It requires the control capability of exact position for loading/unloading job in yard. But it has the limitation of improvement because it has the operational environmental and its structural problems. It has the positioning errors caused by the deformation of rail, yawing motion of crane, wear of wheel, sliding motion between wheel and rail and so on. This study shows the calibration method of crane position by using the primitivity sensor and calibrating plate fixed on the ground.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.428-435
• /
• 2001

In this paper, the design factors of stacker crane for the automatic warehouse are verified by dynamic simulation process. Simulation model is designed as the form of rigid elements and discrete flexible beam connections. The various result for structural design of stacker crane is produced by dynamic simulation and experiment. For the simulation of structural dynamics, ADAMS which is a software for kinematic & dynamic simulation, is used. In order to verify the analysis method, simulation and experiment result are compared.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.41-48
• /
• 2002

• 전기산업
• /
• v.3 no.2
• /
• pp.77-89
• /
• 1992

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.217-224
• /
• 1998

During the operation of crane system in container yard, the objective is to transport the load to a goal position as quick as possible without rope oscillation. The container crane is generally operated by an expert operator, but recently an automatic control system with high speed and rapid transportation is required. Therefore, we developed an optimal controller which has to control the crane system with disturbances. In this paper, we present a design of optima 2-DOF PID controller for the control of gantry crane which has to control swing motion and trolley position. We used evolution strategy(ES) to tune the parameters of 2-DOF PID controller. It was compared with general PID controller. The computer simulations show that the proposed method has better performances than the other method.

• Journal of the Korea Society for Simulation
• /
• v.32 no.4
• /
• pp.11-18
• /
• 2023

This study analyzes the effect of a handshake location of an AS/RS with twin cranes for mixed-model production line at an automobile plant. Implementing a handshake operation has the advantage for preventing route interference between twin cranes that operate without crossing into each other's working areas. However the handshake operation requires additional unloading and loading processes to retrieve assembly parts beyond the handshake area. Therefore the decision regarding the handshake location is crucial to improve efficiency of storage and retrieval operations. Simulation results show that the handshake operation with the optimal handshake location reduces the average response time of storage requests to 87% compared to non-handshake operation.