• 한국자동차공학회논문집
• /
• 제23권3호
• /
• pp.352-359
• /
• 2015

This study investigates the analysis result of structure and fatigue due to the models of the hub space with bolt joint at wheel and the existence or nonexistence of hub ring as the part of suspension system of vehicle. As the static analysis result, the structural vulnerability can be found at hub bolt and the center of wheel at three models. Model 2 and 3 have nearly same deformation and model 1 can be endured at the least load among three models. As the fatigue analysis result, fatigue lives of three models are same at the severest load of SAE bracket history. As many screw threads of weak bolts are jointed in case of model 1, model 1 is shown to be the weakest at fatigue damage among three models. By the result of this study, model 1 with bolt joint becomes most weakest among three models. As model 2 with no hub ring and model 3 with hub ring have the nearly same states of analysis results, hub ring is shown to have no influence on the safety of automotive driving.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.256-262
• /
• 2016

본 연구에서는 자동차 자동변속기의 핵심 부품인 아웃풋 허브 및 리액션 허브의 치형 미성형 구간의 최소화를 위한 배압 냉간 단조 성형 공법에 대한 유한요소해석을 수행하였다. 변위제어해석으로 펀치 하중 및 슬리브 배압력을 도출하였고, 도출된 하중 및 배압력을 이용한 하중제어해석을 수행하여 상호 검증을 하였다. 변위제어해석과 하중제어해석이 유사한 경향을 보였으며, 아웃풋 허브와 리액션 허브의 미성형 구간을 기준 이하로 만족시키기 위한 펀치 하중과 슬리브 배압력을 구하였다. 리액션 허브의 펀치 하중이 아웃풋 허브 보다 큰 이유는 상부 치형 가공 시 리액션 허브의 단면감소율이 아웃풋 허브 보다 크기 때문인 것으로 판단되며, 슬리브 배압력이 아웃풋허브와 리액션 허브에서 차이가 나는 것 또한 슬리브 단면적의 차이에 기인한 것으로 판단된다. 본 연구에서 제시한 배압 냉간 단조 성형 해석 과정과 결과를 적용한 실제 치형 가공의 미성형 구간 결과와 비교하여 검증 평가하였으며, 치형 제품의 품질 개선 및 생산성 향상을 위해 요구되는 성형가공 조건을 도출하는데 유용하게 활용될 수 있을 것이다.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.104-109
• /
• 2019

Reverse engineering techniques using 3D scanners and 3D printing technologies are being used in various industries. In this paper, the three-dimensional model is designed for automotive hub parts through 3D scanning and reverse engineering, and the design of hub parts is intended to be printed on FDM-style 3D printers to measure and analyze the dimensions of hub parts designed for reverse design and 3D printed hub parts. Experimental result have shown that the dimensions of 3D printed hub parts are small compared to those of the reverse-engineered dimensions, which are due to the shrinkage of filament materials in 3D printing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1383-1384
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1385-1386
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.435-436
• /
• 2010

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.72-77
• /
• 2011

In this paper, we propose effective diagnosis algorithm for hub bearing fault in driving vehicle using acceleration signal and wheel speed signal measured in hub bearing unit or knuckle. This algorithm consists of differential, envelope and power spectrum method. We developed diagnosis system for realizing proposed algorithm. This system consists of input device including acceleration sensor and wheel speed sensor, calculation device using Digital Signal Processor (DSP) and display device using Personal Digital Assistant (PDA). Using this diagnosis system, a driver can see hub bearing fault(flaking) from the vibration in driving vehicle. With early repairing, he can keep good ride feeling and prevent accident of vehicle resulting from hub bearing fault.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.421-424
• /
• 2013

본 연구에서는 교육 및 연구를 위한 CFD 해석 프로그램인 EDISON_CFD를 이용하여 자동차 Spoiler의 장착 유무에 따른 공력 특성을 분석해보았다. Spoiler가 장착되지 않은 자동차의 공력 특성을 확인하고, Spoiler의 길이에 따라 공력 특성이 어떻게 차이가 나는지 비교하였다. HONDA S2000 차량의 압력 계수를 구하였고, 자동차 길이의 3.5%, 7%, 14%에 해당하는 길이의 Spoiler를 장착하여 어떠한 변화가 발생하는지 확인하였다. 그 결과 Spoiler의 길이가 길수록 짧을 때보다 상대적으로 좋은 효율을 보이는 것을 확인할 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.363-368
• /
• 2002

An automobile hub is composed of a hollow cylindrical part with inner and outer diameters. These hub diameters must be precise, as any irregularities in them (diameters) can influence/degrade the motion of an automobile with this problem. Highly accurate and reliable hub inner and outer diameters measurement systems are therefore required for inspection of the diameters. In this research, an automobile hub inner and outer diameters measurement system has been developed and tested. The system consists of measuring heads with LVDT sensors, and associated software for automatic measurement and calibration of the diameters and the sensors respectively. The system has been evaluated in comparison with an existing measurement system, and the following outcomes have been achieved; .Improved and guaranteed quality and reliability .Increased productivity and cost reduction. These results prove the system developed in this research to be suitable for automobile hub inspection.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.142-149
• /
• 2002

In this paper, the metal forming process is caused of rise of the unit cost of production in increase of the lead-time and cost because of manufacturing final product through a few the number of processes. Flow control complex forming is proposed to put into formulation in order to apply cold forging from conventional approximate similarity theory, and the forming loads of the real material(AISI 1008) can be calculated by put at the new similarity formula the load by plasticine model material experiment through hub clutch. In order to reduce lead-time and cost the technology is used to manufacture with lower die of this product. By the application synthetic resin as the raw material, it is have the merit such short lead-time, low cost, good surface finish etc., as compared with the machine work.