• Composites Research
• /
• v.33 no.5
• /
• pp.288-295
• /
• 2020

Fiber-reinforced composite laminates have high specific stiffness and strength and are expected to be useful for weight reduction in weight-sensitive industries, such as automotive and aerospace. However, designing composite laminates is often dependent on designer's experience and intuition because of difficulties in determining the number of plies and stacking sequence, which tends to lead to over-design. In this study, optimal design of composite laminates was performed to minimize weight, while withstanding the given load. Based on the enumeration method, all combinations of stacking sequence satisfying the design guideline for composite laminates were considered. Composite laminates were discretized into panels. Optimal number of plies and stacking sequence for each panel were determined considering local load on each panel and contiguity across adjacent panels. Failure index from Tsai-Wu criteria was optimized for strength and buckling analysis was performed for compressive load. Stacking angles of 0, ±45 and 90° were used.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.19-32
• /
• 2011

There are many investment budget drafts in the filed of a road traffic safety. The traffic safety budget is spitted into following three major areas: 1) traffic safety facility (Engineering), 2) traffic enforcement (Enforcement), and 3) traffic safety education & public relation (Education). The three area are known as so-called 3E policy. This study investigates the effect of the investment in the 3E policy on the reduction of traffic accidents analyzing the data annually collected from the 15 local governments during 1992 to 2007. The analysis employing the traffic accidents as the dependent variable reveals that the effect of the investment is higher if same amount of investment is made on areas of the traffic safety education and public relation than the area of facility improvement. The similar conclusions are resulted from the separate investigation of traffic accidents data by 6 different types. All the results consistently indicate that the current traffic safety investment being primarily made on traffic safety facility needs to shift to the areas of traffic safety education and public relation budget.

• Journal of the Korean Regional Science Association
• /
• v.31 no.3
• /
• pp.19-37
• /
• 2015

The purpose of this study is to confirm a structural relationship on factors affecting ratio of public transportation spending to a car-owning household's total transportation expenditure. For this purpose, informations of household's attributes and activities were gathered using the 13th Korean Labor and Income Panel Study (KLIPS), and information of land-use and transportation conditions on their residential locations was collected and processed. A structural equation model (SEM) on determinants affecting ratio of public transportation expenditure was constructed, based on an execution result of factor analysis using the analyzing database. The latent variables were derived as land-use/transportation characteristic, household's attribute and household's activity. In the analyzing result of the SEM, the entire latent variables were significant. And, the first two latent variables had positive influences, and the last latent variable had a negative impact. To promote public transportation use of the car-owning households, this study suggests that the policies such as enhancement of convenience in public transportation use for the household's activities and improvement of the land-use/transport conditions are required.

• Archives of design research
• /
• v.12 no.4
• /
• pp.99-108
• /
• 1999

The interior space in a passenger car is consisted with many partial elements, and the instrument panel is the most important part from all of them, which is designate the total image of the interior design and the space variation, drivability and safety of the interior space. ] The instrument panel of a passenger car in the early age had the concept of a wall between the engine room and the passenger cabin on which the instrument for the driver were fitted. Therefore the central mounting of the instruments was the typical feature regardless of the position of a driver seat. As the automobiles became more functional with many equipments, driver oriented instrument panel with energy absorbing materials had been developed, and that was the beginning of the various instrument panel design of these days. The recent instrument panels of passenger car have the tendency of going back to the central instrument mounting as it was at the past on a few cars for the strict safety regulation, a new production technology and for the enhanced drivability. It can be summarized into a few results as these with the analysis of a few recent instrument panels. -minimizing the total volume for the better frontal visibility. -energy absorbing and passive structures for the strict impact regulations. -revival of central instrument mounting for the convenience and safety through minimizing the difference of the focal length of a driver.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.212-215
• /
• 2009

요구되는 접착력과 그라프트율을 만족시킬 수 있는 변성폴리프로필렌의 제조 기술 확립을 목표로 변성폴리프로필렌의 최적 합성을 위한 과산화물, 변성폴리프로필렌의 최적 합성을 위한 촉매 및 반응몰비, 변성폴리프로필렌의 최적 합성을 위한 반응온도, 반응시간 확립을 통한 변성 PP 제조기술을 개발하였으며, $90{\Phi}$ extruder에서 상업 생산을 위한 공정 제어 기술 확립과 접착력과 그라프트율 등을 나타내는 변성폴리프로필렌의 최적 합성 조건 확립을 통한 폴리프로필렌 엘라스토머 복합수지용은 물론 강관 코팅용, 시트 및 필름용 등의 변성 폴리프로필렌 제조기술을 개발하였다. 이들 변성 PP를 활용하여 매트릭스 및 필러, 분산 조건 변경 시험, 엘라스토머 폴리프로필렌 컴파운드 최적 분산 조건 확립, 엘라스토머 폴리프로필렌 컴파운드 pilot 생산 및 제품 분석을 통하여 초고강성 범퍼, 룸미러 케이스 소재, 인패널, 도어용으로 사용될 수 있는 자동차 부품용 폴리프로필렌 복합수지 개발을 완료하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.642-649
• /
• 2015

Resistance Spot Welding (RSW) is the method for joining two overlapped base materials when high pressure and current is applied from electrodes. Due to the safety problem such high pressure and voltage, automation should be early adopted. In this paper, the spot welding is developed as a computational model of wheel house from GM Korea and the welding condition such as weld sequence is considered. The computational analysis is preceded as a static and elasto-plastic procedure and used thermal expansion coefficient represents a dependency of spot volume between two panels. In case of welding sequence, the efficiency which depends on the distance between current spot point and the other is calculated in several cases.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.129-138
• /
• 2005

Until the early part of the 1990s, interior design has never been thought important by car makers. Repeated attempts have been made to systemize a technical structure, such as layout, driving method, and size, and the car's interior design has been developed by in simple comparison with the exterior design. In the 1990s, however, this trend began to change because consumers began spending more time in their cars, so the motive of the technology development became that of giving comfort and functional satisfaction to the customers. Observing how a person spends inside his or her car and considering the latest trends in car interiors have made a consumer-oriented sense of value i.e., intensifying the personality of the car's interior design and considering the emotional makeup of the consumer factor in the acquisition of a strategic brand identity. These days, car interiors assume a new concept every year due to the constant change in various factors, and the application of a high-tech design, with a sensing function and a navigation system, to achieve driverless running, is being raised as a key trend element technology for the future. Now, at the present when multilateral concept applications of design are attempted under the direct influences from other fields such as product design, fashion and furniture, I would like to lay stress on investigating and analysing the changes in car interior design varying with the background of the times and formative characteristics from the object point of view. On this study, I would like to compare the background of the times and flow of car interior design with priority given to crash pad and would like to attempt to present the direction of the future car interior design together with diversifying major technical factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.590-595
• /
• 2016

The US is pursuing a plan to raise the subsidies for electric vehicles by more than 30%. The number of electric vehicles in Europe is expected to be one million by 2020 and 2030 and there are plans to expand in the center of Germany to supply six million electric vehicles on the dissemination and development policies. The development of the electric vehicle is not simply a technical trend but there is the potential to improve the access to this technology and the possibility of changing the entire social system and long-term energy security. Domestic competition is also increasing the supply of electric vehicles, as new blue ocean markets are emerging. The current domestic On-board Charger (Home Charger) plans to be suspended from the 2015 government-sponsored installation, This paper on the IEC 61851-1 and IEC 61851-22 specifications analyzes the development of a midnight electricity charger as a low-cost algorithm, the decrease in price and the improved convenience of the On-board Charger for Bluetooth module with the ATmega128 existing charger system, and the UI configuration via the LCD Panel to a Smartphone app are proposed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.605-611
• /
• 2016

Mg alloy sheet exhibits significant differences in tensile and compressive yield stress depending on the temperature, as well as variations in its hardening behavior. Such unusual behavior makes it difficult to simulate the forming process of Mg alloy sheets. Results of analysis tend to deviate significantly from the experimental data because commercial software do not completely implement the unusual hardening behavior, yield asymmetry and temperature dependent changes in the Mg alloy's material properties. In the previous study, an in-plane tension-compression cyclic tester was developed to predict the cyclic behavior of Mg alloy sheets at an elevated temperature of up to $250^{\circ}C$. A new constitutive equation was suggested to analyze the unusual behavior, and was implemented in the commercial software in the form of user subroutine. In this paper, a stamping process of Mg seat cushion panel for automotive parts was simulated using the experimental data and user subroutine. Based on the analysis, an optimal temperature condition was determined and a stamping die shape at each step was suggested in the non-isothermal stamping of Mg alloy sheets.

• Transactions of Materials Processing
• /
• v.15 no.7 s.88
• /
• pp.496-503
• /
• 2006

The inner and outer car panels for bonnet, door, and trunk lid are assembled by hemming rather than welding. To achieve successful fabrication of these panels, the complicated timing chart of hemming units for pre-and main hemming stages should be made to optimal one. In this study, a design system for automatic timing chart generation is developed. Using AutoCAD VBA and EXCEL data chart, hemming die design parameters and guidelines were put into the program to give hemming unit drawings and consequent timing charts. Then the prepared timing charts were checked and modified. The effectiveness of the system is verified by applying it successfully to hemming unit design for bonnet panel joining.