• 제목/요약/키워드: 자동차 배기소음

검색결과 63건 처리시간 0.026초

자동차 가속 주행 소음규제와 대책

  • 김준배
    • 소음진동
    • /
    • 제5권2호
    • /
    • pp.158-162
    • /
    • 1995
  • 자동차의 소음은 차실내 소음과 차외소음의 두가지로 나눌 수 있는데 소음은 자동차에 탑승하고 있는 사람들이 감성적으로 느끼는 것이어서 차량의 상품성에 직접적인 영향을 미치므로 자동차 제작자는 보다 더 정숙한 차실내 분위기를 만들기 위하여 자율적이 노력을 게을리 하지 않는 분야이며, 차외 소음은 산업화와 경제적 성장에 따른 자동차 수의 증가로 인하여 도로교통 소음에 크게 기여하므로 각국 정부 는 법률로써 이를 규제하고 있다. 소음을 포함한 환경오염 방지에 대한 관심이 고조 되는 가운데 도로 주변에서의 도로교통 소음은 주민의 일상생활 및 주게에 점점 더 크게 영향을 주게 되어, 국민이 소음측면에서 보다 더 편안한 생활을 할 수 있도록 정부는 가속주행소음, 배기소음, 경적소음 등 자동차로 기인하는 소음의 수준을 낮추고자 노력하여 왔다. 이 글에서 법규의 규제를 받고 있는 자동차로 기인하는 소음 중 도로교통소음에 기어가 큰 주행상태의 자동차 소음저감을 목표로 하는 가속 주행 소음 규제와 그 대책을 기술하였다.

  • PDF

자동차 환경 소음 진동 측정 평가

  • 정일록;서충열
    • 소음진동
    • /
    • 제8권1호
    • /
    • pp.13-20
    • /
    • 1998
  • 도시생활에서 가장 짜증스러운 것은 자동차 소음이다. 경제발전과 더불어 인구의 도시 집중과 급격한 차량증가는 교통량이 많은 간선도로변을 중심으로 도로교통 소음문제가 야기되고 있으며, 우리나라도 지난 '97. 7월 자동차 1000만대 보유국이 되었다. 도로교통 소음은 자동차에서 발생하는 소음과 차량의 통행량, 차량의 주행속도및 도로주변 조건등 각종 요인이 복합 된 것으로 저속운행이 일반적인 도시에서는 자동차에서 발생하는 소음 중 엔진에서 나는 소음이 대개 60% 이상을 점하게 된다. 이러한 문제점 등을 감안하고 쾌적한 생활 환경 조성을 위하여 환경부에서는 제작차 소음 허용기준을 정하여 제작차가 시판되기전 단계에서 제작차 소음 허용기준에 적합하게 제작되는지 여부를 관리하기 위하여 인증제도를 시행 중에 있으며, 인증 시험에 통과된 차량에 대해서만 제작 시판할 수 있도록 법제화하여 운영하고 있다. 인증에 필요한 시험은 자동차의 가속주행소음, 배기소음 및 경적소음 시험으로써 본 장에서는 제작차 인증시험과 평가방법 등을 소개하고, 아울러 도로교통 소음 진동에 대하여서도 기술하고자 한다.

  • PDF

자동차 파워트레인의 소음 및 진동

  • 강구태
    • 소음진동
    • /
    • 제11권2호
    • /
    • pp.207-215
    • /
    • 2001
  • 삶의 질적 향상에 대한 소비자의 욕구가 증대되고 환경문제에 대한 관심이 실생활과 밀접한 관계가 있는 자동차에 미치게 되면서, 배기가스 규제 강화와 함께 소음에 대한 소비자의 요구 수준이 점점 높아지고 있다. 자동차의 소음은 일반적으로 주행시 외부로 방사되는 주행소음(pass-by noise)과 승차감에 영향을 미치는 실내소음으로 구분할 수 있는데, 주행시 외부소음은 국내 2002년 법규와 유럽의 법규 등에서 그 규제가 점점 강화되고 있고, 실내소음은 자동차의 상품성을 좌우하는 요소로서 그 중요성이 점점 커지고 있다 각 자동차 생산업체들은 NVH (noise, vibration and harshness) 개선에 많은 관심을 두고 있으며, 특히 주행소음 및 실내소음 전반에 있어 발생요인으로 큰 비중을 차지하고 있는 파워트레인(엔진 및 트랜스미션)에 대한 NVH 개선에 많은 투자를 하고 있다. 최근 개발되고 있는 차세대 자동차 엔진들을 보아도 EU의 2005년 EURO-IV배기가스 규제 및 북미의 SULEV 규제를 만족함과 동시에, 연비 향상과 NVH 향상을 개발 목표로 하고 있음을 알 수 있다.(중략)

  • PDF

능동배기소음제어용 능동형 머플러의 개발 동향

  • 오재응;김홍섭;손동구
    • 소음진동
    • /
    • 제5권4호
    • /
    • pp.468-472
    • /
    • 1995
  • 능동배기소음제어용 능동형 머플러의 배발은 자동차의 고출력 요구, 연비 향상 그리고 배기 소음규제의 강화 등의 이유로 개발의 필요성이 높아지고 있다. 외국의 경우 N.C.T, TRRL, M.H.I에서는 증동형 머플러의 개발을 위해서는 배기 가스 나 심한 충격에서 성능을 지속할 수 있는 액츄에이터와 센서의 설계, 개발을 전제로 하고 있다. 따라서 이러한 기술의 개발은 여러 능동제어기술의 발단을 촉진할 수 있다는 점에서 필수적이다고 할 수 있겠다. 능동형 머플러와 기존의 수동형 머플러 의 조합을 통해 광데역의 배기 소음을 저감할 수 있는 머플러의 개발은 연급한 장점 뿐만 아니라 독자적인 배기계 설계 기술을 확보한다는 점에서 연구 개발이 필요하다 고 볼 수 있다.

  • PDF

자동차 소음기 특성 및 배기소음 개선 방안 (Characteristics of vehicle mufflers and improvement measures of vehicle exhaust noise)

  • 이재원;강대준;구진회;박형규;김태석;권혁제;김종춘
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.897-900
    • /
    • 2007
  • Vehicles are exhausting various environmental pollutions such as exhaust gas, noise, and so on. This study investigates only noise problems by vehicles, especially the vehicle exhaust noise. It is known that the exhaust noise among those is over 20% of vehicle noise when the vehicle is suddenly accelerated or normally accelerated. In this study, we mainly investigate the exhaust noise of vehicle so that we intend to show the measures to decrease the illegal tuning mufflers and reduce the exhaust noise problems. In the conclusion, we suggest the new appropriate standard to control the tuning mufflers and reduce the exhaust noise induced by vehicles.

  • PDF

자동차 소음기 특성 및 배기소음 개선 방안 (Characteristics of Vehicle Mufflers and Improvement Measures of Vehicle Exhaust Noise)

  • 이재원;강대준;구진회
    • 한국소음진동공학회논문집
    • /
    • 제18권12호
    • /
    • pp.1224-1228
    • /
    • 2008
  • Vehicles are exhausting various environmental pollutions such as exhaust gas, noise, and so on. This study investigates only noise problems by vehicles, especially the vehicle exhaust noise. It is known that the exhaust noise among vehicle noises is over 20% of those when the vehicle is suddenly accelerated or normally accelerated. In this study, we mainly investigate the exhaust noise of vehicle so that we intend to show the measures to decrease the illegal tuning mufflers and reduce the exhaust noise problems. In the conclusion, we suggest the new appropriate standard to control the tuning mufflers and reduce the exhaust noise induced by vehicles.

자동차 소음기의 내부 형상이 배기소음과 배기가스에 미치는 영향 (The Influence of exhaust sound and emission by according to automobile muffler inner shapes)

  • 이중섭;공태우;정한식;정효민
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집B
    • /
    • pp.365-370
    • /
    • 2000
  • This study represents effect to attain to the exhaust gas and the exhaust noise by the inner shapes of automobile muffler, and obtained optimization-data for the inner muffler shapes by the temperature variation of the exhaust gas in muffler. The results of noise show to decrease in order of model-1, 2 and 3 under that the engine speed is 3500 R.P.M and similar values beyond it. CO represented good the model-2 at low engine speed and model-1 at high engine speed. The model-3 was show to tiny variation difference by the variables. HC decrease mostly by increase of the engine speed and expressed low values the model-2 at 3,000 R.P.M and the model-1 at high speed. Wholly, the model-2 expressed stable results. The temperature distributions expressed high distributions by increase of the engine speed, and the model-3 was express most good among three models.

  • PDF

공회전 시 저소음화를 위한 자동차 배기계 위치 결정 (Layout of Engine Exhaust System for Low-Noise Idling Condition)

  • 최충영;이정권;김태균;장승호;김회전
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2009년도 추계학술대회 논문집
    • /
    • pp.242-243
    • /
    • 2009
  • 배기토출음은 공회전시 발생하는 소음에 큰 영향을 끼친다. 연비를 높이기 위하여 공회전시 RPM을 낮추면 엔진 점화 주파수가 낮아지며, 이 경우 배기계 위치에 따른 음향학적 공명 주파수와 일치하면 배기 토출음의 크기가 증가한다. 따라서 본 연구에서는 공회전시 배기토출음을 줄이기 위해 소음기의 위치와 각 배기관들의 길이를 최적화하였다. 최적화 결과로써 3 가지 배기계 위치를 얻을 수 있었고, 실제 실험과의 비교를 통하여 최적화된 배기계 위치가 그렇지 않은 배기계 위치에 비하여 소음 저감량이 높은 것을 확인하였다.

  • PDF

자동차 배기계의 배기압 감응형 제어 머플러 개발에 관한 연구 (II) - 배기압 감응형 제어 머플러의 소음특성과 스프링 상수 - 최초 열림 압력의 관계 - (The Development of Muffler with Controller Sensing Exhaust-gas Pressure in Automotive Exhaust System (II))

  • 이해철;이민호;이준서;차경옥
    • 한국자동차공학회논문집
    • /
    • 제11권3호
    • /
    • pp.167-176
    • /
    • 2003
  • This study is focused on the development of a new muffler. A control valve installed in the exhaust system is operated by torsion springs, and its open angle is controlled automatically corresponding to the engine operating conditions. A control valve and a control muffler sensing exhaust-gas pressure are made f3r developing a new muffler. The experiments were done using an exhaust system simulator having the same pulsation wave frequency and similar pulsation propagation characteristics of a real exhaust system. The purpose of this study is to develope a new muffler system which has improved noise reduction quality and less power loss than conventional mufflers and electronic-control mufflers. Finally the characteristic of noise compared with conventional muffler and muffler sensing exhuast-gas pressure.

디지탈 필터링 기법(技法)을 이용(利用)한 자동차(自動車) 배기소음(排氣騷音)의 음향특성(音響特性) 재현(再現)에 관(關)한 연구(硏究) (A Study on the Reproduction of Acoustic Characteristics of a Car's Exhaust Noise Using Digital Filtering Technique)

  • 조재환;이종민;황요하
    • 한국자동차공학회논문집
    • /
    • 제1권3호
    • /
    • pp.55-62
    • /
    • 1993
  • Autoregressive moving average(ARMA) model which is a time domain parametric modeling method is implemented for modeling and reproducing characteristics of exhaust noise of an automobile in various RPM range. Experiments have been carried out using 9 set of exhaust noise signals measured at 1,000-3,000 RPM range. Characteristics of sampled signals were estimated using ARMA modeling and Akaike's FPE(final prediction error) criterion to define exact model structure and for model validation. The digital filter consisted of the esitmated ARMA(70,1) model parameters was programed to reproduce exhaust noise. The spectral analysis of reproduced noise is very close to original. The results show that our approaching technique for reproducing acoustic characteristics is valid and feasible to apply in the field of noise quality control.

  • PDF